Physical and mechanical properties of a dental resin adhesive containing hydrophobic chitin nanocrystals.

Objectives: In this paper we propose embedding natural fillers, such as pristine and functionalized chitin nanocrystals, into resin adhesives to produce photopolymerizable dental filled adhesives with enhanced biocompatibility, hydrophobicity, mechanical resistance, and anti-bacterial properties.

Methods: Chitin nanocrystals (ChNC) were functionalized with decanoyl chloride and methacrylic anhydride to produce ChNC-C10 and ChNC-MA, respectively. These hydrophobically functionalized chitin nanocrystals were incorporated into a resin adhesive at concentrations of 0.

Adverse Effects of Toxic Metal Pollution in Rivers on the Physiological Health of Fish.

Toxic metal pollution influences the lives of diverse aquatic organisms and humans who consume contaminated aquatic products. However, its potential impacts on aquatic organism health and, thus, ecological health, have been neglected in many regions. This research was carried out to contribute to filling that knowledge gap.

Iridescent Cellulose Nanocrystal Films Modified with Hydroxypropyl Cellulose.

The introduction of polymers into a chiral nematic cellulose nanocrystal (CNC) matrix allows for the tuning of optical and mechanical properties, enabling the development of responsive photonic materials. In this study, we explored the incorporation of hydroxypropyl cellulose (HPC) into a CNC film prepared by slow evaporation. In the composite CNC/HPC thin films, the CNCs adopt a chiral nematic structure, which can selectively reflect certain wavelengths of light to yield a colored film.

Six-month evaluation of novel bioabsorbable scaffolds composed of poly-L-lactic acid and amorphous calcium phosphate nanoparticles in porcine coronary arteries.

Objective Using coronary angiography and intravascular ultrasound methods to evaluate the performance of the novel fully bioabsorbable scaffold (NFBS) composed of poly-L-lactic acid/amorphous calcium phosphate (PLLA/ACP) at six-month follow-up by comparing with PLLA scaffolds Methods Twelve PLLA/ACP scaffolds and 12 PLLA scaffolds were implanted into the coronary arteries of 12 miniature pigs. Quantitative coronary angiography (QCA) was used to measure the reference vessel diameter (RVD), mean lumen diameter (MLD) and late lumen loss (LLL). According to IVUS images, we calculated the strut malapposition rate (SMR) at post implantation, strut overlap rate (SOR), reference vessel area (RVA), mean stent area (MSA), mean lumen area (MLA) and luminal patency rate (LPR) at six-month follow-up.

Biocompatible Chitosan-Functionalized Upconverting Nanocomposites.

Simultaneous integration of photon emission and biocompatibility into nanoparticles is an interesting strategy to develop applications of advanced optical materials. In this work, we present the synthesis of biocompatible optical nanocomposites from the combination of near-infrared luminescent lanthanide nanoparticles and water-soluble chitosan. NaYF:Yb,Er upconverting nanocrystal guests and water-soluble chitosan hosts are prepared and integrated together into biofunctional optical composites.

Self-aggregation of water-dispersible nanocollagen helices.

Inspired by nature, collagen is an outstanding polypeptide utilized to exploit its bioactivity and material design for healthcare technologies. In this study, we describe the self-aggregation of water-dispersible nanocollagen helices upon solidification to fabricate different forms of natural collagen materials. Chemically extracted native collagen fibrils are uniform anisotropic nanoparticles with an average diameter of about 50 nm and a high aspect ratio.

Aerogel materials with periodic structures imprinted with cellulose nanocrystals.

Novel aerogel materials with periodic structures derived from chiral nematic liquid crystalline cellulose nanocrystals (CNCs) are reported. The liquid crystalline structure of phase-separated CNCs is locked by a simple solvent exchange method or silica condensation. Both cellulose and silica/cellulose aerogel materials were obtained after critical point drying, and subsequent calcination of the silica/cellulose composite afforded a silica aerogel with periodic order.

Water-soluble chitosan-derived sustainable materials: towards filaments, aerogels, microspheres, and plastics.

Bioinspired materials have aroused great interest as their inherent biocompatible and structural characteristics have given rise to sustainable applications. In this work, we have reported the phase and morphology transformation of chitosan from crystalline nanofibrils into amorphous sheets for fabricating sustainable materials. Acetylation-induced aqueous dissolution of native chitosan nanofibrils affords water-soluble chitosan as a biopolymeric liquid.

Chitin Liquid-Crystal-Templated Oxide Semiconductor Aerogels.

Chitin nanocrystals have been used as a liquid crystalline template to fabricate layered oxide semiconductor aerogels. Anisotropic chitin liquid crystals are transformed to sponge-like aerogels by hydrothermally cross-linked gelation and lyophilization-induced solidification. The hydrothermal gelation of chitin aqueous suspensions then proceeds with peroxotitanate to form hydrogel composites that recover to form aerogels after freeze-drying.

Chiral nematic porous germania and germanium/carbon films.

We report our extensive attempts and, ultimately, success to produce crack-free, chiral nematic GeO2/cellulose nanocrystal (CNC) composite films with tunable photonic properties from the controlled assembly of germanium(iv) alkoxides with the lyotropic liquid-crystalline CNCs in a mixed solvent of water/DMF. With different pyrolysis conditions, the photonic GeO2/CNC composites can be converted into freestanding chiral nematic films of amorphous GeO2, and semiconducting mesoporous GeO2/C and Ge/C replicas. These new materials are promising for chiral separation, enantioselective adsorption, catalysis, sensing, optoelectronics, and lithium ion batteries.

Tailoring the assembly, interfaces, and porosity of nanostructures toward enhanced catalytic activity.

The evolution of nanotechnology has inspired materials scientists to invent nanostructures with achievements in numerous practical applications, particularly in catalysis. The great advancements typically involve flexible control over the unique properties of the nanomaterial through tuning their structural geometries and components. In this Feature Article, we present the recent progress of our recent research and that of other groups in tailoring the assembly, interfaces, and porosity of diverse inorganic nanostructures.

Tuning the iridescence of chiral nematic cellulose nanocrystals and mesoporous silica films by substrate variation.

We have discovered that the self-assembly of cellulose nanocrystals (CNCs) into chiral nematic phases varies significantly with the substrate and evaporation rate. These variables allow the reflectance peak of iridescent chiral nematic films of CNCs and mesoporous silica templated from CNCs to be tuned over a wide range of wavelengths.

Mesoporous silica and organosilica films templated by nanocrystalline chitin.

Liquid crystalline phases can be used to impart order into inorganic solids, creating materials that mimic natural architectures. Herein, mesoporous silica and organosilica films with layered structures and high surface areas have been templated by nanocrystalline chitin. Aqueous suspensions of spindle-shaped chitin nanocrystals were prepared by sequential deacetylation and hydrolysis of chitin fibrils isolated from king crab shells.

From formation mechanisms to synthetic methods toward shape-controlled oxide nanoparticles.

Metal oxide nanomaterials have been intensively pursued for modern science and nanotechnology. Control over the size and shape of the oxide nanoparticles enables tunability of their unique properties sought for many useful applications. This review presents a comprehensive overview of the recent advances in the shape-controlled synthesis of colloidal oxide nanoparticles.

Controlled synthesis of ceria nanoparticles for the design of nanohybrids.

Ceria nanoparticles were synthesized from reaction mixture of cerium nitrate/hexamethylenediamine/water-ethylene glycol. Lamellar, particle-aggregated array, platelet, rice, cube, quasi-sphere shapes of the ceria nanoparticles can be controlled by tuning reaction parameters (reagent concentration, reagent components, pH, and reaction conditions). Studies on shape-dependent catalysis of the bare ceria samples toward CO oxidation indicated that the cube-shaped ceria nanoparticles show better catalytic activity than the nanospheres and the commercial micropowders.

Portraits of colloidal hybrid nanostructures: controlled synthesis and potential applications.

Inorganic hybrid nanostructures containing two or more nanocomponents have been emerging in many areas of materials science in recent years. The particle-particle interactions in a hybrid particle system could significantly improve existing local electronic structure and induce tunable physiochemical responses. The current work reviews the diverse inorganic hybrid nanostructures formed by adhesion of the different single components via seed-mediated method.

Controlled growth of uniform noble metal nanocrystals: aqueous-based synthesis and some applications in biomedicine.

Aqueous-dispersed single and binary noble metal nanocrystals have attracted much attention as key materials in many fields, especially in biomedicine, catalysis, etc. Controlled growth of the metal nuclei allow for the manipulation of uniform morphology of final products. This behavior would tailor their unique physiochemical and electronic properties and follows by their practical applications.

A new route to size and population control of silver clusters on colloidal TiO₂ nanocrystals.

Formation of hybrid Ag-TiO(2) nanocrystals (NCs) in which Ag clusters are uniformly deposited on individual TiO(2) NC surface has been achieved by using hydrophobic surfactant-capped TiO(2) NCs in combination with a photodeposition technique. The population of Ag clusters on the individual TiO(2) NC surface can be controlled by the degree of hydrophobicity (e.g.

Large-scale synthesis of uniform silver orthophosphate colloidal nanocrystals exhibiting high visible light photocatalytic activity.

Silver orthophosphate nanocrystals with controlled particle size have been synthesized using a simple, reproducible and easily scaled up route based on the reaction between silver ions, oleylamine and phosphoric acid. The obtained nanocrystals are highly uniform in size and exhibit high visible light activity for the photodecomposition of organic compounds.

A general procedure to synthesize highly crystalline metal oxide and mixed oxide nanocrystals in aqueous medium and photocatalytic activity of metal/oxide nanohybrids.

A conventional and general route has been exploited to the high yield synthesis of many kinds of highly crystalline metal oxide and mixed oxide nanocrystals with different morphologies including belt, rod, truncated-octahedron, cubic, sphere, sheet via the hydrothermal reaction of inorganic precursors in aqueous solution in the presence of bifunctional 6-aminohexanoic acid (AHA) molecules as a capping agent. This method is a simple, reproducible and general route for the preparation of a variety of high-crystalline inorganic nanocrystals in scale-up. The shape of inorganic nanocrystals such as CoWO(4), La(2)(MoO(4))(3) can be controlled by simply adjusting the synthesis conditions including pH solution and reaction temperature.

Two-phase synthesis of colloidal annular-shaped Ce(x)La(1-x)CO3OH nanoarchitectures assembled from small particles and their thermal conversion to derived mixed oxides.

Undoped and cerium doped LaCO(3)OH annular-shaped nanoarchitectures with high specific surface area have been fabricated via the thermolysis of Ce(x)La(1-x)(oleate)(3) (x = 0-20 mol %) complexes in a toluene-water system containing tert-butylamine/oleylamine. The products exhibit 400 nm-sized monodisperse annular-shaped nanoarchitectures, which are constituted of 3-5 nm-sized primary particles. A possible mechanism of the reaction of Ce(x)La(1-x)(oleate)(3) and tert-butylamine for the formation of annular-shaped Ce(x)La(1-x)CO(3)OH nanoarchitectures is proposed.

Shape- and size-controlled synthesis of monoclinic ErOOH and cubic Er2O3 from micro- to nanostructures and their upconversion luminescence.

A general approach has been developed for the synthesis of monoclinic ErOOH and cubic Er2O3 structures with high yield and controlled size and shape via the solvo-hydrothermal reaction of erbium nitrate in water/ethanol/decanoic acid media. The monoclinic ErOOH phase was formed at relatively low temperature (120-140 degrees C); however, the cubic Er2O3 phase was obtained at higher temperature (160-180 degrees C). By simply tuning different experimental parameters, such as the reaction temperature, the concentration of decanoic acid and erbium precursor etc.

Shape-controlled synthesis of highly crystalline titania nanocrystals.

A versatile synthetic method based on solvothermal technique has been developed for the fabrication of TiO(2) nanocrystals with different shapes such as rhombic, truncated rhombic, spherical, dog-bone, truncated and elongated rhombic, and bar. The central features of our approach are the use of water vapor as hydrolysis agent to accelerate the reaction and the use of both oleic acid and oleylamine as two distinct capping surfactants which have different binding strengths to control the growth of the TiO(2) nanoparticles. We also show that the presence of an appropriate amount of water vapor along with the desired oleic acid/oleylamine molar ratio plays a crucial role in controlling size and shape of TiO(2) nanocrystals.