Nicotine-magnesium aluminum silicate complexes processed by blending: Characterization for usage as drug carriers in mucoadhesive buccal discs.

Complexation of nicotine (NCT) and magnesium aluminum silicate (MAS) has been formed in the dispersions that required multiple preparation steps. In this study, physical blending was used to produce NCT-MAS complexes. NCT, a free-base liquid state form, was adsorbed onto the MAS granules, where the diffusion and intercalation of NCT molecules into the MAS silicate layers occurred.

Formulation and In Vitro Evaluation of Mucoadhesive Sustained Release Gels of Phytoestrogen Diarylheptanoids from for Vaginal Delivery.

Diarylheptanoids (DAs) characterized by a 1,7-diphenylheptane structural skeleton are considered a novel class of phytoestrogens. The DAs available in Roxb. () extract demonstrated significant estrogenic activities both in vitro and in vivo.

Sodium Alginate-Quaternary Polymethacrylate Composites: Characterization of Dispersions and Calcium Ion Cross-Linked Gel Beads.

The objective of this work was to examine the effect of quaternary polymethacrylate (QPM), a water-insoluble polymer with a positive charge, on the characteristics of the sodium alginate (SA) dispersions and the calcium alginate (CA) gel beads containing propranolol HCl (PPN). The SA-QPM composite dispersions presented the formation of flocculates with a negative charge due to the electrostatic interaction of both substances. The QPM addition did not affect the SA dispersions' Newtonian flow, but the composite dispersions' viscosity enhancement was found.

Preparation and Evaluation of Directly Compressible Orally Disintegrating Tablets of Cannabidiol Formulated Using Liquisolid Technique.

This study demonstrated the implementation of a liquisolid technique to formulate directly compressible orally disintegrating tablets (ODTs). Cannabidiol (CBD), a hydrophobic cannabinoid, was prepared as a liquisolid powder using microcrystalline cellulose-colloidal silicon dioxide as a carrier-coating material. Different liquid vehicles differing in their volatility, hydrophilicity, and viscosity were investigated.

In Vitro Release, Mucosal Permeation and Deposition of Cannabidiol from Liquisolid Systems: The Influence of Liquid Vehicles.

This work investigated the influence of liquid vehicles on the release, mucosal permeation and deposition of cannabidiol (CBD) from liquisolid systems. Various vehicles, including EtOH, nonvolatile low- and semi-polar solvents, and liquid surfactants, were investigated. The CBD solution was converted into free-flowing powder using carrier (microcrystalline cellulose) and coating materials (colloidal silica).

Formulation Development of Fluconazole-Loaded Lactose Agglomerate Tablets as a Disinfectant for -Associated Dentures.

Denture stomatitis is induced by irritation or an inflammatory response when wearing a denture for a long time. species are the leading cause of biofilm formation on the surfaces and fissures of dentures. Thus, this study aimed to formulate and evaluate fluconazole tablets for use in preparing a disinfectant mixture with anticandidal activity.

Mucosal Delivery of Cannabidiol: Influence of Vehicles and Enhancers.

In this study, the mucosal permeation and deposition of cannabidiol (CBD) with neat and binary vehicles were investigated. Permeation experiments were performed using static diffusion cells coupled with fresh porcine esophageal mucosa. The CBD-vehicle solutions were applied at a fixed dose (~5 mg/cm), and the corresponding permeation parameters were calculated.

Particle Agglomeration of Acid-Modified Tapioca Starches: Characterization and Use as Direct Compression Fillers in Tablets.

Acid-modified tapioca starches (AMTSs) possessed good compressibility but showed poor particle flowability for preparing tablets by the direct compression method. The aims of this work were to prepare and characterize AMTS agglomerates using polyvinylpyrrolidone (PVP) as an agglomerating agent. The dilution potential and stability studies of the AMTS agglomerates were investigated.

Modified glutinous rice starch-chitosan composite films for buccal delivery of hydrophilic drug.

The fabrication and characterization of ball-milling modified glutinous rice starch (MGRS):chitosan (CS) composite films were demonstrated. Effect of CS ratios (2:1, 1:1, 1:2 MGRS:CS) on the film properties was investigated. Lidocaine hydrochloride was used as a model hydrophilic drug.

Eudragit RL-based film coatings: How to minimize sticking and adjust drug release using MAS.

Polymeric film coatings based on quaternary polymethacrylates (QPMs, e.g. Eudragits®) are frequently used for controlled release applications.

Alginate-poloxamer beads for clotrimazole delivery: Molecular interactions, mechanical properties, and anticandidal activity.

Calcium alginate (CA) beads loaded with clotrimazole (CZ) were modified by adding poloxamer (PLX) in this study. Blends of PLX188 or PLX407 into sodium alginate (SA) dispersions caused a decrease in the SA zeta potential and led to viscosity synergism. SA with carboxyl and hydroxyl groups can interact with the hydroxyl groups of PLX via hydrogen bonding.

Thai glutinous rice starch modified by ball milling and its application as a mucoadhesive polymer.

This study aimed to investigate physicochemical properties and potential application as a mucoadhesive polymer of Thai glutinous rice starch modified by planetary ball milling. XRD and ATR-FTIR results indicated a reduction in crystallinity of starch after ball milling. Different ball milling times, ranging from 5 to 45 min, resulted in modified glutinous rice starch (MGRS) with different levels of crystallinity loss, and therefore varying degrees of cold water solubility, swelling capacity, and gelatinized dispersion viscosity.

Sodium caseinate-magnesium aluminum silicate nanocomposite films for modified-release tablets.

The aim of this study was to investigate the effect of clay, magnesium aluminum silicate (MAS), on the properties of sodium caseinate (SC) dispersions and films. Moreover, the SC-MAS dispersions were evaluated for film coating of modified-release tablets. The results showed that MAS addition led to particle flocculation and viscosity synergism in the SC-MAS dispersions.

Modification of alginate beads using gelatinized and ungelatinized arrowroot (Tacca leontopetaloides L. Kuntze) starch for drug delivery.

Arrowroot (Tacca leontopetaloides L. Kuntze) starch in gelatinized and ungelatinized forms was used to modify the characteristics of calcium alginate (CA) beads containing diclofenac sodium (DS). Sodium alginate (SA) was able to molecularly interact with ungelatinized starch (UGS) granules and gelatinized starch (GS) gel via hydrogen bonding mechanisms in the dispersions, leading to viscosity synergism before cross-linking.

Alginate-caseinate composites: Molecular interactions and characterization of cross-linked beads for the delivery of anticandidals.

Polysaccharide-protein composites offer potential utility for the delivery of drugs. The objectives of this work were to investigate the molecular interactions between sodium alginate (SA) and sodium caseinate (SC) in dispersions and films and to characterize calcium alginate (CA) beads mixed with SC for the delivery of fluconazole (FZ) and clotrimazole (CZ). The results demonstrated that SA could interact with SC, which caused a viscosity synergism in the dispersions.

Particle agglomeration of chitosan-magnesium aluminum silicate nanocomposites for direct compression tablets.

Exfoliated nanocomposites of chitosan-magnesium aluminum silicate (CS-MAS) particles are characterized by good compressibility but poor flowability. Thus, the aims of this study were to investigate agglomerates of CS-MAS nanocomposites prepared using the agglomerating agents water, ethanol, or polyvinylpyrrolidone (PVP) for flowability enhancement and to evaluate the agglomerates obtained as direct compression fillers for tablets. The results showed that the addition of agglomerating agents did not affect crystallinity, but slightly influenced thermal behavior of the CS-MAS nanocomposites.

Modification of gellan gum films by halloysite: physicochemical evaluation and drug permeation properties.

The aim of this study was to determine the potential of gellan gum (GG) and halloysite (HS) dispersions at different mixing ratios and to investigate the potential of GG-HS dispersions in film formation. To this end, the dispersions and films were characterized. The dispersions formed films with large particles ranging from 3 to 4 μm in size, with a zeta potential of ∼-35 mV.

Lysozyme-magnesium aluminum silicate microparticles: Molecular interaction, bioactivity and release studies.

The objectives of this study were to investigate the adsorption behavior of lysozyme (LSZ) onto magnesium aluminum silicate (MAS) at various pHs and to characterize the LSZ-MAS microparticles obtained from the molecular interaction between LSZ and MAS. The results showed that LSZ could be bound onto the MAS layers at different pHs, leading to the formation of LSZ-MAS microparticles. The higher preparation pH permitted greater adsorption affinity but a lower adsorption capacity of LSZ onto MAS.

Quaternary polymethacrylate-magnesium aluminum silicate films: Water uptake kinetics and film permeability.

The aim of this study was to investigate the impact of the addition of different amounts of magnesium aluminum silicate (MAS) to polymeric films based on quaternary polymethacrylates (QPMs, here Eudragit RS and RL). MAS contains negatively charged SiO(-) groups, while QPM contains positively charged quaternary ammonium groups. The basic idea is to be able to provide desired water and drug permeability by simply varying the amount of added MAS.

Chitosan-gum arabic polyelectrolyte complex films: physicochemical, mechanical and mucoadhesive properties.

By blending chitosan (CS) and gum arabic (GA), a powerful biomaterial complex might be obtained due to the unique properties of CS and the low viscosity and good emulsifying properties of GA. The objectives of this study were to prepare and examine the properties of dispersions and films of CS and GA as a function of the mixing weight ratio, pH value and molecular weight of CS. The dispersions were characterized by turbidity, zeta potential and cytotoxicity and then the dispersions were cast into films.

Quaternary polymethacrylate-sodium alginate films: effect of alginate block structures and use for sustained release tablets.

The objectives in this study were to characterize quaternary polymethacrylate-sodium alginate (QPM-SA) films prepared using high G block or high M block SA (GSA or MSA, respectively), and to investigate the effects of QPM-SA ratios, film-coating levels and SA block structures on propranolol HCl (PPN) released from coated tablets. The results demonstrated that GSA and MSA shared a similar interaction mechanism with QPM. The QPM-GSA films had higher puncture strength than the QPM-MSA films in dry and wet states, whereas the % elongations were not different.

Optimization of minoxidil microemulsions using fractional factorial design approach.

The objective of this study was to apply fractional factorial and multi-response optimization designs using desirability function approach for developing topical microemulsions. Minoxidil (MX) was used as a model drug. Limonene was used as an oil phase.

Skin deposition and permeation of finasteride in vitro: effects of propylene glycol, ethanol and sodium lauryl sulfate.

The objective of this study was to investigate the effects of propylene glycol (PG), ethanol (EtOH) and sodium lauryl sulfate (SLS) on the in vitro deposition and permeation of finasteride (FNS). A side-by-side diffusion cell mounted with a pig ear skin and a saturated solution of FNS in PG (10, 20% v/v), EtOH (10, 20% v/v) or SLS (0.5, 1% w/v) vehicles were used.

Impact of anti-tacking agents on properties of gas-entrapped membrane and effervescent floating tablets.

Tackiness caused by the gas-entrapped membrane (Eudragit(®)RL 30D) was usually observed during storage of the effervescent floating tablets, leading to failure in floatation and sustained release. In this work, common anti-tacking agents (glyceryl monostearate (GMS) and talc) were used to solve this tackiness problem. The impact of anti-tacking agent on the properties of free films and corresponding floating tablets was investigated.

Modification of quaternary polymethacrylate films using sodium alginate: film characterization and drug permeability.

The aims of this study were to investigate the molecular interaction of quaternary polymethacrylate (QPM) in aqueous-dispersion form with sodium alginate (SA) and to characterize the physicochemical properties, mechanical properties, and drug permeability of the QPM-SA films. The results demonstrated that QPM can interact with SA via electrostatic force, leading to the formation of flocculate particles in the dispersions. Transparent QPM-SA films were prepared using a casting/solvent evaporation method.