The development of multifunctional biochar with NiFeO for the adsorption of Cd (II) from water systems: The kinetics, thermodynamics, and regeneration.

High concentrations of Cd (II) in wastewater have been reported several times which attracted top research attention to mitigate the pollution impacts of the contaminant. Therefore, this study aimed to develop a Zn-doped NiFeO pinecone biochar composite (ZNiF@PB) for the adsorption of Cd (II) from wastewater. FTIR confirmed immobilization of PB on the surface of ZNiF by the presence of C = O at 1638 cm, COOH at 1385 cm, C-O at 1009 cm and Fe-O at 756 cm.

s-scheme3D/3D Bi/BiOBr/P Doped g-C3 N4 with Oxygen Vacancies (Ov) for Photodegradation of Pharmaceuticals: In-situ HO Production and Plasmon Induced Stability.

Complications accompanying photocatalyst stability and recombination of exciton charges in pollutants degradation has been addressed through the construction of heterojunctions, especially S-scheme heterojunction with strong and distinctive redox centres. Herein, an S-scheme BiOBr (BOR) and g-CNPO (CNPO) catalyst (BORCNPO) with oxygen vacancy (Ov) was synthesized for levofloxacin (LVX) and oxytetracycline (OTC) photodegradation under visible light. The 3D/3D BORCNPO catalyst possessed C-O-Br bridging bonds for efficient charge transfer during the fabrication of S-scheme heterojunction.

Nanostructured Carbon Fibres (NCF): Fabrication and Application in Supercapacitor Electrode.

A facile interconnected nanofibre electrode material derived from polybenzimidazol (PBI) was fabricated for a supercapacitor using a centrifugal spinning technique. The PBI solution in a mixture of dimethyl acetamide (DMA) and N, N-dimethylformamide (DMF) was electrospun to an interconnection of fine nanofibres. The as-prepared material was characterised by using various techniques, which include scanning electron microscopy (SEM), X-ray diffractometry (XRD), Raman, X-ray photoelectron spectroscopy (XPS), and Brunauer-Emmett-Teller (BET) among others.

Pinecone biochar for the Adsorption of chromium (VI) from wastewater: Kinetics, thermodynamics, and adsorbent regeneration.

High concentration of chromium in aquatic environments is the trigger for researchers to remediate it from wastewater environments. However, conventional water treatment methods have not been satisfactory in removing chromium from water and wastewater over the last decade. Similarly, many adsorption studies have been focused on one aspect of the treatment, but this study dealt with all aspects of adsorption packages to come up with a concrete conclusion.

An optimised and validated surrogate analyte A-TEEM-PARAFAC-PLS technique for detecting and quantifying the biological oxygen demand in surface water.

A 5-day test duration makes BOD measurement unsatisfactory and hinders the development of a quick technique. Protein-like fluorescence peaks show a strong correlation between the BOD characteristics and the fluorescence intensities. For identifying and measuring BOD in surface water, a simultaneous absorbance-transmittance and fluorescence excitation-emission matrices (A-TEEM) method combined with PARAFAC (parallel factor) and PLS (partial least squares) analyses was developed using a tyrosine and tryptophan (tyr-trpt) mix as a surrogate analyte for BOD.

The removal of pathogenic bacteria and dissolved organic matter from freshwater using microporous membranes: insights into biofilm formation and fouling reversibility.

Pathogenic bacteria in drinking-water pose a health risk to consumers, as they compromise the quality of portable water. Chemical disinfection of water containing dissolved organic matter (DOM) causes harmful disinfection by-products. In this work, 4-hydroxybenzoic acid (4-HBA) blended polyethersulfone membranes were fabricated and characterised using microscopic and spectroscopic techniques.

Utilization of biochar for remediation of heavy metals in aqueous environments: A review and bibliometric analysis.

Biochar usage for removing heavy metals from aqueous environments has emerged as a promising research area with significant environmental and economic benefits. Using the PICO approach, the research question aimed to explore using biochar to remove heavy metals from aqueous media. We merged the data from Scopus and the Web of Science Core Collection databases to acquire a comprehensive perspective of the subject.

Electrocatalytic oxidation of pyrrole on a quasi-reversible silver nanodumbbell particle surface for supramolecular porphyrin production.

Photoactive supramolecular porphyrin assemblies are attractive molecules for light-harvesting applications. This is due to their relatively non-toxicity, biological activities and charge and energy exchange characteristics. However, the extreme cost associated with their synthesis and requirements for toxic organic solvents during purification pose a challenge to the sustainability characteristics of their applications.

Advancing the development of nanocomposite adsorbent through zinc-doped nickel ferrite-pinecone biochar for removal of chromium (VI) from wastewater.

Leather and textile industrial effluents are the main disseminating routes for chromium contamination of water bodies, causing adverse impacts on public and environmental health. The attempt to remediate chromium through conventional wastewater treatment methods is inefficient. Therefore, this study aims to synthesize zinc-doped nickel ferrite pinecone biochar (Zn-NiF@PBC) nanocomposite for the removal of chromium from wastewater systems.

Detection and Quantification of Bisphenol A in Surface Water Using Absorbance-Transmittance and Fluorescence Excitation-Emission Matrices (A-TEEM) Coupled with Multiway Techniques.

In the present protocol, we determined the presence and concentrations of bisphenol A (BPA) spiked in surface water samples using EEM fluorescence spectroscopy in conjunction with modelling using partial least squares (PLS) and parallel factor (PARAFAC). PARAFAC modelling of the EEM fluorescence data obtained from surface water samples contaminated with BPA unraveled four fluorophores including BPA. The best outcomes were obtained for BPA concentration (R = 0.

Electrochemical, surface morphological and computational evaluation on carbohydrazide Schiff bases as corrosion inhibitor for mild steel in acidic medium.

Anticorrosion and adsorption behaviour of synthesized carbohydrazide Schiff bases, namely (Z)-N'-(4-hydroxy-3-methoxybenzylidene)-6-methyl-2-oxo-4-phenyl-1,2,3,4-tetrahydropyrimidine-5-carbohydrazide(MBTC) and (Z)-N'-(3,4-dichlorobenzylidene)-6-methyl-2-oxo-4-phenyl-1,2,3,4-tetrahydropyrimidine-5-carbohydrazide (CBTC) was examined for mild steel (MS) in 15% HCl medium. The corrosion inhibition study was performed by using gravimetric, thermodynamic, electrochemical and theoretical studies including density functional theory (DFT), molecular dynamic simulation (MDS) and Monte Carlo simulations (MCS). The outcomes in terms of corrosion inhibition efficiency using electrochemical impedance spectroscopy (EIS) method at 303 K and 150 ppm concentration were 96.

Adsorptive removal of malachite green dye from aqueous solution using Rumex abyssinicus derived activated carbon.

The potential for malachite green dye saturated effluent to severely affect the environment and human health has prompted the search for effective treatment technologies. Thus, this study was conducted with the goal of developing activated carbon from Rumex abyssinicus for the adsorptive removal of malachite green dye from an aqueous solution. Unit operations such as drying, size reduction, impregnation with HPO, and thermal activation were used during the preparation of the activated carbon.

Adsorption of chromium from electroplating wastewater using activated carbon developed from water hyacinth.

Industrial wastewater polluted with high concentrations of Cr is commonly discharged into water resources without proper treatment. This gives rise to the deterioration of water quality and imposes adverse effects on public health. Therefore, this study is aimed at removing Cr from electroplating wastewater using activated carbon produced from water hyacinth under a full factorial experimental design with three factors and three levels (pH,2,5 and 8, adsorbent dose 0.

Isotherms and Kinetic Studies of Copper Removal from Textile Wastewater and Aqueous Solution Using Powdered Banana Peel Waste as an Adsorbent in Batch Adsorption Systems.

Heavy metals that are present in surface water and wastewater are becoming a severe environmental problem. Because of its toxicity, heavy metal removal has become the main priority for environmental concerns. Banana peels are low-cost agricultural waste that could be used for heavy metal adsorption in wastewater.

Adsorption of methylene blue from textile industrial wastewater using activated carbon developed from Rumex abyssinicus plant.

Methylene blue (MB) is abundantly found in textile industrial effluent which can cause severe health problems for public and environmental ecology. Therefore, this study aimed to remove MB from textile wastewater using the activated carbon developed from Rumex abyssinicus. The adsorbent was activated using chemical and thermal methods, and then it was characterized by SEM, FTIR, BET, XRD, and pH zero-point charge (pHpzc).

Optimization of Cr (VI) removal from aqueous solution with activated carbon derived from Eichhornia crassipes under response surface methodology.

Tannery industries' effluent contains a high concentration of Cr (VI) which has the potential to affect the environment and public health. Therefore, this study aimed to investigate the optimization of Cr (VI) adsorption by activated carbon (AC) derived from Eichhornia crassipes from an aqueous solution. The adsorbent was activated with dilute sulfuric acid followed by thermal activation.

Understanding the Principles and Applications of Dual Z-Scheme Heterojunctions: How Far Can We Go?

In the past seven years, dual Z-scheme heterojunctions evolved as favorable approaches for enhanced charge carrier separation through direct or indirect charge transfer transportation mechanisms. The dynamics of the charge transfer is the major strategy for understanding their photoactivity and stability through the formation of distinctive redox centers. The understanding of currently recognized principles for successful fabrication and classification in different energy and pollution remediation strategies is discussed, and a universal charge transfer-type-based classification of dual Z-schemes that can be adopted for Z-scheme and S-scheme heterojunctions is proposed.

Delayed Solvent-Nonsolvent Demixing Preparation and Performance of a Highly Permeable Polyethersulfone Ultrafiltration Membrane.

Membrane performance optimization is a critical preparation step that ensures optimum separation and fouling resistance. Several studies have employed additives such as carbon and inorganic nanomaterials to optimize membrane performance. These particles provide excellent results but are rather costly, unstable and toxic to several biological organs.

Synthesis of biochar-CoFeO nanocomposite for adsorption of methylparaben from wastewater under full factorial experimental design.

The presence of endocrine-disrupting chemicals in municipal wastewater has emerged as a threat to human health and the environment. Therefore, this study aimed to develop biochar-cobalt ferrite (BCF) nanocomposite for the removal of methylparaben from water under the full factorial experimental design of 4 factors with 3 levels (3). The biochar-CoFeO nanocomposite was developed by co-precipitation method from cobalt ferrite and biochar of Eucalyptus tree bark.

Advances in polymer-based detection of environmental ibuprofen in wastewater.

Globally, ibuprofen is the third most consumed drug and its presence in the environment is a concern because little is known about its adverse effects on humans and aquatic life. Environmentalists have made monitoring and the detection of ibuprofen in biological and environmental matrices a priority. For the detection and monitoring of ibuprofen, sensors and biosensors have provided rapid analysis time, sensitivity, high-throughput screening, and real-time analysis.

Porphyrins developed for photoinactivation of microbes in wastewater.

Photodynamic antimicrobial chemotherapy (PACT) is extensively studied as a strategic method to inactivate pathogenic microbes in wastewater for addressing the limitations associated with chlorination, ozonation, and ultraviolet irradiation as disinfection methods, which generally promote the development of resistant genes and harmful by-products such as trihalomethanes. PACT is dependent on photons, oxygen, and a photosensitizer to induce cytotoxic effects on various microbes by generating reactive oxygen species. Photosensitizers such as porphyrins have demonstrated significant microbial inactivation through PACT, hence now explored for wastewater phototreatment.

Modeling the antifouling properties of atomic layer deposition surface-modified ceramic nanofiltration membranes.

This work investigates the enhancement of antifouling properties of ceramic nanofiltration membranes by surface modification atomic layer deposition (ALD) of TiO. Feed solutions containing bovine serum albumin (BSA), humic acid (HA) and sodium alginate (SA) were used as model foulants. The classic fouling mechanism models and the modified fouling indices (MFI) were deduced from the flux decline profiles.

Toxicity assessment of TiO-conjugated Carbon-based nanohybrid material on a freshwater bioindicator cladoceran, Daphnia magna.

The application of nanocomposite materials fabricated from titanium dioxide nanoparticles (TiO NPs) and different carbon (C) allotropes have gained popularity in water treatment applications due to their synergistic properties. Studies to date have focused on simple forms of nanomaterials (NMs), however, with the technology development, there is a dramatic increase in production and application of these complex NMs which could result in toxicological impacts on organisms when released into aquatic environments. This raises serious concerns about their safety and the need to ascertain their potential adverse effects on aquatic organisms.

The potential of biochar-photocatalytic nanocomposites for removal of organic micropollutants from wastewater.

Biochar (BC)-photocatalyst nanocomposites have emerged as appealing water and wastewater treatment technology. Such nanocomposite materials benefit from the synergistic effect of adsorption and photocatalysis to attain improved removal of pollutants from water and wastewater. Under this review, three BC-based nanocomposite photocatalysts such as BC-TiO, BC-ZnO, and BC-spinel ferrites were considered.

Characterization of natural organic matter in South African drinking water treatment plants: Towards integrating ceramic membrane filtration.

This work presents the first comprehensive investigation of natural organic matter (NOM) fraction removal using ceramic membranes in South Africa. The rate of removal of bulk NOM (measured as UV and DOC % removal), the biodegradable dissolved organic carbon (BDOC) fraction, polarity-based fractions, and fluorescent dissolved organic carbon (FDOM) fractions was investigated from water abstracted from drinking water treatment plants (WTPs) in South Africa. Further, mechanisms of ceramic membrane fouling by waters of South Africa were studied.