Evaluating the Effectiveness of Cellulose-Based Surfactants in Expandable Graphite Wood Coatings.

This study deals with the design of modern environmentally friendly and non-toxic flame retardants based on expandable graphite 25 K + 180 (EG) modified by cellulose ethers (Lovose TS 20, Tylose MH 300, Klucel H) and nanocellulose (CNC) that are biocompatible with wood and, therefore, are a prerequisite for an effective surfactant for connecting EG to wood. The effectiveness of the formulations and surfactants was verified using a radiant heat source test. The cohesion of the coating to the wood surface and the cohesion of the expanded graphite layer were also assessed.

Effect of a Nanocellulose Addition on the Mechanical Properties of Paper.

Nowadays, the emphasis is on increasing the durability of all products. For this reason, it is also advisable to look into extending the durability of paper products. The main reason for using flax pulp is that flax and cotton pulp are widely used for the production of banknotes due to their higher strength.

Evaluation of Chemical and Morphological Properties of Spruce Wood Stored in the Natural Environment.

This paper focuses on the changes in chemical structure and fiber morphological properties of spruce wood during 15 months of its storage in an open forest woodshed. From the chemical composition, the extractives, cellulose, holocellulose, and lignin content were determined. The pH value was measured on the wood surface using a contact electrode.

Chromophores' Contribution to Color Changes of Thermally Modified Tropical Wood Species.

This work examines the effect of thermal modification temperature (180, 200, and 220 °C) in comparison with reference (untreated) samples on selected optical properties of six tropical wood species-Sp. cedar (), iroko (), merbau ( spp.), meranti ( spp.

Chemical pulp from corn stalks.

This work aimed to carry out chemical cooking of corn stalks, both in a nitrate-alkaline manner and in a soda pulp method. The composition of corn is characterized by cellulose, lignin, ash, and substances extractable into polar and organic solvents. Handsheets were made from the pulp, for which the degree of polymerization, sedimentation rate, and strength properties was determined.

Evaluation of Selected Cellulose Macromolecular Properties after Its Chemical Treatment Using Size Exclusion Chromatography.

This work evaluates the effect of using selected inorganic chemicals as the main components of waterborne wood preservative systems on the degradation of the cellulose constituent in wood from model samples. The polymeric properties of cellulose and the homogeneity of the degradation process primarily reflect very well the degree of cellulose deterioration. Whatman papers, as pure cellulose model samples, were impregnated with 10 different 5 wt% solutions of inorganic salts and distilled water and consequently subjected to wet-thermal accelerated aging (T = 85 °C, RH = 65%, for 30 days).

Degradation of Chemical Components of Thermally Modified L. Wood and Its Effect on the Change in Mechanical Properties.

Currently, emphasis is placed on using environmentally friendly materials both from a structural point of view and the application of protective means. For this reason, it is advisable to deal with the thermal modification of wood, which does not require the application of protective substances, to increase its service life. The main reason for the thermal modification of black locust is that although black locust grows abundantly in our country, it has no industrial use.

Fire Resistance Evaluation of New Wooden Composites Containing Waste Rubber from Automobiles.

Particleboards containing waste rubber (tires and mixtures of isolators and carpets) filler were evaluated from the point of view of its flammability. The assessment of the utilization of these composites in the construction industry was analyzed through the determination of their spontaneous ignition temperatures, mass burning rate and calorific value. Based on the results of spontaneous ignition temperatures, similar values between particleboards and particleboards containing 10%, 15% and 20% of waste tires were obtained.

Effect of Natural Aging on Oak Wood Fire Resistance.

The paper deals with the assessment of the age of oak wood (0, 10, 40, 80 and 120 years) on its fire resistance. Chemical composition of wood (extractives, cellulose, holocellulose, lignin) was determined by wet chemistry methods and elementary analysis was performed according to ISO standards. From the fire-technical properties, the flame ignition and the spontaneous ignition temperature (including calculated activation energy) and mass burning rate were evaluated.

Chemical and Morphological Composition of Norway Spruce Wood (, L.) in the Dependence of Its Storage.

Chemical composition and morphological properties of Norway spruce wood and bark were evaluated. The extractives, cellulose, hemicelluloses, and lignin contents were determined by wet chemistry methods. The dimensional characteristics of the fibers (length and width) were measured by Fiber Tester.