Spatially resolved acyl transfer on surface by organo-catalytic scanning probe nanolithography (o-cSPL).

Groundbreaking research done in the area of nanolithography makes it a versatile tool to produce nanopatterns for a broad range of chemical surface functionalization or physical modifications. We report for the first time an organocatalytic scanning probe nanolithography (o-cSPL) approach. Covalent binding of an organocatalyst on the apex of an atomic force microscope (AFM) tip gives way to a system that allows the formation of locally defined acylated-alcohol patterns on self-assembled monolayers (SAMs).

Microwave-Mediated Synthesis of Bulky Lanthanide Porphyrin-Phthalocyanine Triple-Deckers: Electrochemical and Magnetic Properties.

Five heteroleptic lanthanide porphyrin-bis-phthalocyanine triple-decker complexes with bulky peripheral groups were prepared via microwave-assisted synthesis and characterized in terms of their spectroscopic, electrochemical, and magnetic properties. These compounds, which were easily obtained under our preparative conditions, would normally not be accessible in large quantities using conventional synthetic methods, as a result of the low yield resulting from steric congestion of bulky groups on the periphery of the phthalocyanine and porphyrin ligands. The electrochemically investigated triple-decker derivatives undergo four reversible one-electron oxidations and three reversible one-electron reductions.

A switchable self-assembling and disassembling chiral system based on a porphyrin-substituted phenylalanine-phenylalanine motif.

Artificial light-harvesting systems have until now not been able to self-assemble into structures with a large photon capture cross-section that upon a stimulus reversibly can switch into an inactive state. Here we describe a simple and robust FLFL-dipeptide construct to which a meso-tetraphenylporphyrin has been appended and which self-assembles to fibrils, platelets or nanospheres depending on the solvent composition. The fibrils, functioning as quenched antennas, give intense excitonic couplets in the electronic circular dichroism spectra which are mirror imaged if the unnatural FDFD-analogue is used.

High-flexibility combinatorial peptide synthesis with laser-based transfer of monomers in solid matrix material.

Laser writing is used to structure surfaces in many different ways in materials and life sciences. However, combinatorial patterning applications are still limited. Here we present a method for cost-efficient combinatorial synthesis of very-high-density peptide arrays with natural and synthetic monomers.

Effect of Hydrodynamic Forces on meso-(4-Sulfonatophenyl)-Substituted Porphyrin J-Aggregate Nanoparticles: Elasticity, Plasticity and Breaking.

The J aggregates of 4-sulfonatophenyl meso-substituted porphyrins are non-covalent polymers obtained by self-assembly that form nanoparticles of different morphologies. In the case of high aspect-ratio nanoparticles (bilayered ribbons and monolayered nanotubes), shear hydrodynamic forces may modify their shape and size, as observed by peak force microscopy, transmission electron microscopy of frozen solutions, small-angle X-ray scattering measurements in a disk-plate rotational cell, and cone-plate rotational viscometry. These nanoparticles either show elastic or plastic behaviour: there is plasticity in the ribbons obtained upon nanotube collapse on solid/air interfaces and in viscous concentrated nanotube solutions, whereas elasticity occurs in the case of dilute nanotube solutions.

Catalytic Scanning Probe Nanolithography (cSPL): Control of the AFM Parameters in Order to Achieve Sub-100-nm Spatially Resolved Epoxidation of Alkenes Grafted onto a Surface.

Scanning probe lithography (SPL) appears to be a reliable alternative to the use of masks in traditional lithography techniques as it offers the possibility of directly producing specific chemical functionalities with nanoscale spatial control. We have recently extend the range of applications of catalytic SPL (cSPL) by introducing a homogeneous catalyst immobilized on the apex of a scanning probe. Here we investigate the importance of atomic force microscopy (AFM) physical parameters (applied force, writing speed, and interline distance) on the resultant chemical activity in this cSPL methodology through the direct topographic observation of nanostructured surfaces.

Biomimetic self-assembling acylphthalocyanines.

We synthesized a series of biomimetic self-assembling phthalocyanines equipped with carbonyl groups as recognition motifs, a central zinc atom and diverse solubilizing alkyl chains mimicking for the first time with these robust pigments the natural chlorosomal bacteriochlorophylls. Upon self-assembly a very broad and red-shifted Q-band absorption extending to over 900 nm is put into evidence.

meso-Ester Corroles.

The introduction of ester groups on the 5- and 15-meso positions of corroles stabilizes them against oxidation and induces a redshift of their absorption and emission spectra. These effects are studied through the photophysical and electrochemical characterization of up to 16 different 5,15-diester corroles, in which the third meso position is free or occupied by an aryl group, a long alkyl chain, or an ester moiety. Single-crystal X-ray structure analysis of five 5,15-diestercorroles and DFT and time-dependent DFT calculations show that the strong electron-withdrawing character of the 5,15 ester substituents is reinforced by their π overlap with the macrocyclic aromatic system.

An efficient synthesis of porphyrins with different meso substituents that avoids scrambling in aqueous media.

We have developed new conditions that afford regioisomerically pure trans-A2B2-, A3B-, and trans-AB2C-porphyrins bearing aryl and arylethynyl substituents. The porphyrins were prepared by the acid-catalyzed condensation of dipyrromethanes with aldehydes followed by oxidation with p-chloranil or 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ). Optimal conditions for the condensation were identified after examining various reaction parameters such as solvent composition, acid concentration, and reaction time.

Energy transfer in aggregates of bacteriochlorophyll c self-assembled with azulene derivatives.

Bacteriochlorophyll (BChl) c is the main light-harvesting pigment of certain photosynthetic bacteria. It is found in the form of self-assembled aggregates in the so-called chlorosomes. Here we report the results of co-aggregation experiments of BChl c with azulene and its tailored derivatives.

Ultrafast Dynamics of meso-Tetraphenylmetalloporphyrins: The Role of Dark States.

Studying the relaxation pathways of porphyrins and related structures upon light absorption is crucial to understand the fundamental processes of light harvesting in biosystems and many applications. Herein, we show by means of transient absorption studies, following Q- and Soret-band excitation, and ab initio calculations on meso-tetraphenylporphyrinato magnesium(II) (MgTPP) and meso-tetraphenylporphyrinato cadmium(II) (CdTPP) that electronic relaxation following Soret-band excitation of porphyrins with a heavy central atom is mediated by a hitherto disregarded dark state. This accounts for an increased rate of internal conversion.

Electron cryo-microscopy of TPPS4⋅2HCl tubes reveals a helical organisation explaining the origin of their chirality.

A widely studied achiral porphyrin, which is highly soluble in aqueous solutions (TPPS4), is shown to self-assemble into helical nanotubes. These were imaged by electron cryo-microscopy and a state-of-the-art image analysis allows building a map at ∼5 Å resolution, one of the highest obtained so far for molecular materials. The authors were able to trace the apparent symmetry breaking to existing nuclei in the "as received samples", while carefully purified samples show that both handnesses occur in equal amounts.

Nanoscopic imaging of meso-tetraalkylporphyrins prepared in high yields enabled by Montmorrilonite K10 and 3A molecular sieves.

We have developed a high-yielding synthesis of meso-tetraalkylporphyrins, which previously have been obtained only in lower yields. By employing Montmorrilonite K10 as the acid catalyst and 3 Å molecular sieves as the dehydrating agent, yields that reached 70 % could be achieved with some aliphatic aldehydes. The free-base porphyrins with decyl (C10) or longer chains were imaged at the single-molecule level at the solvent/surface interface.

Water coordinated zinc dioxo-chlorin and porphyrin self-assemblies as chlorosomal mimics: variability of supramolecular interactions.

Semisynthetic zinc chlorins are shown for the first time to self-assemble in the absence of an intrinsic hydroxy group, which is always present in the chlorosomal bacteriochlorophylls (BChl's) c, d and e. Instead, the presently studied compounds have carbonyl groups. These cannot function as hydrogen bond donating groups.

Anisotropic organization and microscopic manipulation of self-assembling synthetic porphyrin microrods that mimic chlorosomes: bacterial light-harvesting systems.

Being able to control in time and space the positioning, orientation, movement, and sense of rotation of nano- to microscale objects is currently an active research area in nanoscience, having diverse nanotechnological applications. In this paper, we demonstrate unprecedented control and maneuvering of rod-shaped or tubular nanostructures with high aspect ratios which are formed by self-assembling synthetic porphyrins. The self-assembly algorithm, encoded by appended chemical-recognition groups on the periphery of these porphyrins, is the same as the one operating for chlorosomal bacteriochlorophylls (BChl's).

Highly linear self-assembled porphyrin wires.

An efficient noncovalent assembly process involving high geometrical control was applied to a linear bis(imidazolyl zinc porphyrin) 7Zn, bearing C(18) substitutents, to generate linear multiporphyrin wires. The association process is based on imidazole recognition within the cavity of the phenanthroline-strapped zinc porphyrin. In chlorinated solvents, discrete soluble oligomers were obtained after (7Zn)(n) was end-capped with a terminal single imidazolyl zinc porphyrin derivative 4Zn.

Two-dimensional structures of anthracene derivatives: photodimerization and host-guest chemistry.

By using a simple anthracene derivative with four alkoxy tails, a two-dimensional patterned surface was fabricated. The two-dimensional structures were directly visualized by scanning tunneling microscopy (STM) at the solid/liquid interface. The anthracene derivative formed highly ordered structures displaying cavities into which solvent molecules of 1-phenyloctane were coadsorbed.

Novel pyridinium dyes that enable investigations of peptoids at the single-molecule level.

Single-molecule microscopy is a powerful tool for investigating various uptake mechanisms of cell-penetrating biomolecules. A particularly interesting class of potential transporter molecules are peptoids. Fluorescence labels for such experiments need to comply with several physical, chemical, and biological requirements.

Ridge-tile-like chiral topology: synthesis, resolution, and complete chiroptical characterization of enantiomers of edge-sharing binuclear square planar complexes of Ni(II) bearing achiral ligands.

Binuclear square planar Ni(II) complexes are described, formed by two tridentate ligands with two imine-nitrogens coordinating two nickel atoms. Such complexes are synthetically readily available with great structural variety and present new types of ridge-tile-like chiral compounds that are reasonably stable in the appropriate "bent" conformation. Enantiomerically pure samples of these compounds have been obtained for the first time using HPLC with a chiral stationary phase.

Mimics of the self-assembling chlorosomal bacteriochlorophylls: regio- and stereoselective synthesis and stereoanalysis of acyl(1-hydroxyalkyl)porphyrins.

Diacylation of copper 10,20-bis(3,5-di-tert-butylphenylporphyrin) using Friedel-Crafts conditions at short reaction times, high concentrations of catalyst, and 0-4 degrees C affords only the 3,17-diacyl-substituted porphyrins, out of the 12 possible regioisomers. At longer reaction times and higher temperatures, the 3,13-diacyl compounds are also formed, and the two isomers can be conveniently separated by normal chromatographic techniques. Monoreduction of these diketones affords in good yields the corresponding acyl(1-hydroxyalkyl)porphyrins, which after zinc metalation are mimics of the natural chlorosomal bacteriochlorophyll (BChl) d.

Self-assembled chromophores within mesoporous nanocrystalline TiO2: towards biomimetic solar cells.

Artificial light-harvesting antennas consisting of self-assembled chromophores that mimic the natural pigments of photosynthetic bacteria have been inserted into voids induced in porous titania (TiO2, anatase) in order to investigate their suitability for hybrid solar cells. Mesoporous nanocrystalline TiO2 with additional uniform macropores was treated with precursor solutions of the pigment which was then induced to self-assemble within the voids. The chromophores were tailored to combine the self-assembly characteristics of the natural bacteriochlorophylls with the robustness of artificial Zn-porphyrins being stable for prolonged periods even upon heating to over 200 degrees C.

Preferential pathways for light-trapping involving beta-ligated chlorophylls.

The magnesium atom of chlorophylls (Chls) is always five- or six-coordinated within chlorophyll-protein complexes which are the main light-harvesting systems of plants, algae and most photosynthetic bacteria. Due to the presence of stereocenters and the axial ligation of magnesium the two faces of Chls are diastereotopic. It has been previously recognized that the alpha-configuration having the magnesium ligand on the opposite face of the 17-propionic acid moiety is more frequently encountered and is more stable than the more seldom beta-configuration that has the magnesium ligand on the same face [T.

The supramolecular organization of self-assembling chlorosomal bacteriochlorophyll c, d, or e mimics.

Bacteriochlorophylls (BChls) c, d, and e are the main light-harvesting pigments of green photosynthetic bacteria that self-assemble into nanostructures within the chlorosomes forming the most efficient antennas of photosynthetic organisms. All previous models of the chlorosomal antennae, which are quite controversially discussed because no single crystals could be grown so far from these organelles, involve a strong hydrogen-bonding interaction between the 3(1) hydroxyl group and the 13(1) carbonyl group. We have synthesized different self-assemblies of BChl c mimics having the same functional groups as the natural counterparts, that is, a hydroxyethyl substituent, a carbonyl group and a divalent metal atom ligated by a tetrapyrrole.

Programmed metalloporphyrins for self-assembly within light-harvesting stacks: (5,15-dicyano-10,20-bis(3,5-di-tert-butylphenyl)porphyrinato)zinc(II) and its push-pull 15-N,N-dialkylamino-5-cyano congeners obtained by a facile direct amination.

The title dicyano compound was synthesized via cyanation and it self-assembles in nonpolar solvents giving red-shifted and broad absorption maxima just as the bacteriochlorophylls which are encountered in the light-harvesting organelles of early photosynthetic bacteria. In the crystal, stacks are formed through a hierarchic combination of pi-stacking and a CN-Zn electrostatic interaction. Push-pull 15-N,N-dialkylamino-5-cyano congeners could be obtained in high yields using a solvent- and catalyst-free direct amination of meso-bromoporphyrins.