Use of Serious Games in Interventions of Executive Functions in Neurodiverse Children: Systematic Review.

Background: Serious games (SG) have emerged as promising tools for cognitive training and therapeutic interventions, especially for enhancing executive functions. These games have demonstrated the potential to support individuals with diverse health conditions, including neurodevelopmental and cognitive disorders, through engaging and interactive experiences. However, a comprehensive understanding of the effectiveness of SG in enhancing executive functions is needed.

Influence of Temporal and Frequency Selective Patterns Combined with CSP Layers on Performance in Exoskeleton-Assisted Motor Imagery Tasks.

Common Spatial Pattern (CSP) has been recognized as a standard and powerful method for the identification of Electroencephalography (EEG)-based Motor Imagery (MI) tasks when implementing brain-computer interface (BCI) systems towards the motor rehabilitation of lost movements. The combination of BCI systems with robotic systems, such as upper limb exoskeletons, has proven to be a reliable tool for neuromotor rehabilitation. Therefore, in this study, the effects of temporal and frequency segmentation combined with layer increase for spatial filtering were evaluated, using three variations of the CSP method for the identification of passive movement vs.

A Gait Imagery-Based Brain-Computer Interface with Visual feedback for Spinal Cord Injury Rehabilitation on Lokomat.

Objective: Motor Imagery (MI)-based Brain-Computer Interfaces (BCIs) have been proposed for the rehabilitation of people with disabilities, being a big challenge their successful application to restore motor functions in individuals with Spinal Cord Injury (SCI). This work proposes an Electroencephalography (EEG) gait imagery-based BCI to promote motor recovery on the Lokomat platform, in order to allow a clinical intervention by acting simultaneously on both central and peripheral nervous mechanisms.

Methods: As a novelty, our BCI system accurately discriminates gait imagery tasks during walking and further provides a multi-channel EEG-based Visual Neurofeedback (VNFB) linked to μ (8-12 Hz) and β (15-20 Hz) rhythms around Cz.

Decoding lower-limb kinematic parameters during pedaling tasks using deep learning approaches and EEG.

Stroke is a neurological condition that usually results in the loss of voluntary control of body movements, making it difficult for individuals to perform activities of daily living (ADLs). Brain-computer interfaces (BCIs) integrated into robotic systems, such as motorized mini exercise bikes (MMEBs), have been demonstrated to be suitable for restoring gait-related functions. However, kinematic estimation of continuous motion in BCI systems based on electroencephalography (EEG) remains a challenge for the scientific community.

Continuous reach-to-grasp motion recognition based on an extreme learning machine algorithm using sEMG signals.

Recognizing user intention in reach-to-grasp motions is a critical challenge in rehabilitation engineering. To address this, a Machine Learning (ML) algorithm based on the Extreme Learning Machine (ELM) was developed for identifying motor actions using surface Electromyography (sEMG) during continuous reach-to-grasp movements, involving multiple Degrees of Freedom (DoFs). This study explores feature extraction methods based on time domain and autoregressive models to evaluate ELM performance under different conditions.

Gait Training-Based Motor Imagery and EEG Neurofeedback in Lokomat: A Clinical Intervention With Complete Spinal Cord Injury Individuals.

Robotic systems, such as Lokomat® have shown promising results in people with severe motor impairments, who suffered a stroke or other neurological damage. Robotic devices have also been used by people with more challenging damages, such as Spinal Cord Injury (SCI), using feedback strategies that provide information about the brain activity in real-time. This study proposes a novel Motor Imagery (MI)-based Electroencephalogram (EEG) Visual Neurofeedback (VNFB) system for Lokomat® to teach individuals how to modulate their own μ (8-12 Hz) and β (15-20 Hz) rhythms during passive walking.

Evaluation of temporal, spatial and spectral filtering in CSP-based methods for decoding pedaling-based motor tasks using EEG signals.

Stroke is a neurological syndrome that usually causes a loss of voluntary control of lower/upper body movements, making it difficult for affected individuals to perform Activities of Daily Living (ADLs). Brain-Computer Interfaces (BCIs) combined with robotic systems, such as Motorized Mini Exercise Bikes (MMEB), have enabled the rehabilitation of people with disabilities by decoding their actions and executing a motor task. However, Electroencephalography (EEG)-based BCIs are affected by the presence of physiological and non-physiological artifacts.

Unraveling Transformative Effects after tDCS and BCI Intervention in Chronic Post-Stroke Patient Rehabilitation-An Alternative Treatment Design Study.

Stroke is a debilitating clinical condition resulting from a brain infarction or hemorrhage that poses significant challenges for motor function restoration. Previous studies have shown the potential of applying transcranial direct current stimulation (tDCS) to improve neuroplasticity in patients with neurological diseases or disorders. By modulating the cortical excitability, tDCS can enhance the effects of conventional therapies.

Coupling Effects of Cross-Corticomuscular Association during Object Manipulation Tasks on Different Haptic Sensations.

The effects of corticomuscular connectivity during object manipulation tasks with different haptic sensations have not been quantitatively investigated. Connectivity analyses enable the study of cortical effects and muscle responses during movements, revealing communication pathways between the brain and muscles. This study aims to examine the corticomuscular connectivity of three Electroencephalography (EEG) channels and five muscles during object manipulation tasks involving contact surfaces of Sandpaper, Suede, and Silk.

Optical fiber sensors for posture monitoring, ulcer detection and control in a wheelchair: a state-of-the-art.

Background: In the last ten years, the design and implementation of Optical Fiber Sensors (OFS) in biomedical applications have been discussed, with a focus on different subareas, such as body parameter monitoring and control of assistive devices.

Materials And Methods: A scoping review was performed including scientific literature (PubMed/Scopus, IEEE and Web of Science), patents (WIPO/Google Scholar), and commercial information.

Results: The main applications of OFS in the rehabilitation field for preventing future postural diseases and applying them in device controllers were discussed in this review.

EEG motor imagery classification using deep learning approaches in naïve BCI users.

Motor Imagery (MI)-Brain Computer-Interfaces (BCI) illiteracy defines that not all subjects can achieve a good performance in MI-BCI systems due to different factors related to the fatigue, substance consumption, concentration, and experience in the use. To reduce the effects of lack of experience in the use of BCI systems (naïve users), this paper presents the implementation of three Deep Learning (DL) methods with the hypothesis that the performance of BCI systems could be improved compared with baseline methods in the evaluation of naïve BCI users. The methods proposed here are based on Convolutional Neural Network (CNN), Long Short-Term Memory (LSTM)/Bidirectional Long Short-Term Memory (BiLSTM), and a combination of CNN and LSTM used for upper limb MI signal discrimination on a dataset of 25 naïve BCI users.

Lower-limb kinematic reconstruction during pedaling tasks from EEG signals using Unscented Kalman filter.

Kinematic reconstruction of lower-limb movements using electroencephalography (EEG) has been used in several rehabilitation systems. However, the nonlinear relationship between neural activity and limb movement may challenge decoders in real-time Brain-Computer Interface (BCI) applications. This paper proposes a nonlinear neural decoder using an Unscented Kalman Filter (UKF) to infer lower-limb kinematics from EEG signals during pedaling.

EEG changes during passive movements improve the motor imagery feature extraction in BCIs-based sensory feedback calibration.

This work proposes a method for two calibration schemes based on sensory feedback to extract reliable motor imagery (MI) features, and provide classification outputs more correlated to the user's intention.After filtering the raw electroencephalogram (EEG), a two-step method for spatial feature extraction by using the Riemannian covariance matrices (RCM) method and common spatial patterns is proposed here. It uses EEG data from trials providing feedback, in an intermediate step composed of bothth nearest neighbors and probability analyses, to find periods of time in which the user probably performed well the MI task without feedback.

Effects of the concentration level, eye fatigue and coffee consumption on the performance of a BCI system based on visual ERP-P300.

Background: A widely used paradigm for Brain-Computer Interfaces (BCI) is based on detecting P300 Event-Related Potentials (ERPs) in response to stimulation and concentration tasks. An open challenge corresponds to maximizing the performance of a BCI by considering artifacts arising from the user's cognitive and physical conditions during task execution.

New Method: In this study, an analysis of the performance of a visual BCI-P300 system was performed under the metrics of Sensitivity (Sen), Specificity (Spe), Accuracy (Acc), and Area-Under the ROC Curve (AUC), considering the main reported factors affecting the neurophysiological behavior of the P300 signal: Concentration Level, Eye Fatigue, and Coffee Consumption.

A Kinematic Information Acquisition Model That Uses Digital Signals from an Inertial and Magnetic Motion Capture System.

This paper presents a model that enables the transformation of digital signals generated by an inertial and magnetic motion capture system into kinematic information. First, the operation and data generated by the used inertial and magnetic system are described. Subsequently, the five stages of the proposed model are described, concluding with its implementation in a virtual environment to display the kinematic information.

Towards Multimodal Equipment to Help in the Diagnosis of COVID-19 Using Machine Learning Algorithms.

COVID-19 occurs due to infection through respiratory droplets containing the SARS-CoV-2 virus, which are released when someone sneezes, coughs, or talks. The gold-standard exam to detect the virus is Real-Time Polymerase Chain Reaction (RT-PCR); however, this is an expensive test and may require up to 3 days after infection for a reliable result, and if there is high demand, the labs could be overwhelmed, which can cause significant delays in providing results. Biomedical data (oxygen saturation level-SpO2, body temperature, heart rate, and cough) are acquired from individuals and are used to help infer infection by COVID-19, using machine learning algorithms.

A deep learning approach to estimate pulse rate by remote photoplethysmography.

This study proposes a U-net shaped Deep Neural Network (DNN) model to extract remote photoplethysmography (rPPG) signals from skin color signals to estimate Pulse Rate (PR).Three input window sizes are used in the DNN: 256 samples (5.12 s), 512 samples (10.

Wheelchair prototype controlled by position, speed and orientation using head movement.

A prototype that simulates a wheelchair was built using electronic commercial devices and software implementation with the aim to operate the prototype using head movement and analyzing the system response. The controllers were simulated using MATLAB® toolbox and Python™ libraries. The mean time response of the system with manual control was 37,8 s.

Molecular dynamics of the COVID-19 pandemic in Espirito Santo (Brazil) and border States.

This study represents the first overview of the epidemiological dynamics of SARS-CoV-2 in Espirito Santo (ES) State, Brazil, filling in knowledge on this topic, observing data collected in the State, and aiming at understanding the epidemiological dynamics of the virus in ES, as well as its possible routes of transmission and dissemination. . Our results highlight that, so far, nine lineages have been identified with ES State.

Usability, occupational performance and satisfaction evaluation of a smart environment controlled by infrared oculography by people with severe motor disabilities.

A smart environment is an assistive technology space that can enable people with motor disabilities to control their equipment (TV, radio, fan, etc.) through a human-machine interface activated by different inputs. However, assistive technology resources are not always considered useful, reaching quite high abandonment rate.

Design and Implementation of a Position, Speed and Orientation Fuzzy Controller Using a Motion Capture System to Operate a Wheelchair Prototype.

The design and implementation of an electronic system that involves head movements to operate a prototype that can simulate future movements of a wheelchair was developed here. The controller design collects head-movements data through a MEMS sensor-based motion capture system. The research was divided into four stages: First, the instrumentation of the system using hardware and software; second, the mathematical modeling using the theory of dynamic systems; third, the automatic control of position, speed, and orientation with constant and variable speed; finally, system verification using both an electronic controller test protocol and user experience.

Control Systems and Electronic Instrumentation Applied to Autonomy in Wheelchair Mobility: The State of the Art.

Automatic wheelchairs have evolved in terms of instrumentation and control, solving the mobility problems of people with physical disabilities. With this work it is intended to establish the background of the instrumentation and control methods of automatic wheelchairs and prototypes, as well as a classification in each category. To this end a search of specialised databases was carried out for articles published between 2012 and 2019.

Trends in Compressive Sensing for EEG Signal Processing Applications.

The tremendous progress of big data acquisition and processing in the field of neural engineering has enabled a better understanding of the patient's brain disorders with their neural rehabilitation, restoration, detection, and diagnosis. An integration of compressive sensing (CS) and neural engineering emerges as a new research area, aiming to deal with a large volume of neurological data for fast speed, long-term, and energy-saving purposes. Furthermore, electroencephalography (EEG) signals for brain-computer interfaces (BCIs) have shown to be very promising, with diverse neuroscience applications.

Simulation System of Electric-Powered Wheelchairs for Training Purposes.

For some people with severe physical disabilities, the main assistive device to improve their independence and to enhance overall well-being is an electric-powered wheelchair (EPW). However, there is a necessity to offer users EPW training. In this work, the Simcadrom is introduced, which is a virtual reality simulator for EPW driving learning purposes, testing of driving skills and performance, and testing of input interfaces.

Sleeve for Knee Angle Monitoring: An IMU-POF Sensor Fusion System.

The knee flexion-extension angle is an important variable to be monitored in various clinical scenarios, for example, during physical rehabilitation assessment. The purpose of this work is to develop and validate a sensor fusion system based on a knee sleeve for monitoring of physical therapy. The system consists of merging data from two inertial measurement units (IMUs) and an intensity-variation based Polymer Optical Fiber (POF) curvature sensor using a quaternion-based Multiplicative Extended Kalman Filter (MEKF).