Metal-Organic Framework Photocatalyst Incorporating Bis(4'-(4-carboxyphenyl)-terpyridine)ruthenium(II) for Visible-Light-Driven Carbon Dioxide Reduction.

In this study, we report the successful incorporation of the photoactive bis(4'-(4-carboxyphenyl)-terpyridine)ruthenium(II) (Ru(cptpy)) strut into a robust metal-organic framework (MOF), AUBM-4. The single crystal X-ray analysis revealed the formation of a new one-dimensional structure of Ru(cptpy) complexes linked together by Zr atoms that are eight coordinated with O atoms. The chemically stable MOF structure was employed as an efficient photocatalyst for carbon dioxide conversion to formate under visible light irradiation.

High photo-currents with a zwitterionic thiocyanate-free dye in aqueous-based dye sensitized solar cells.

We report a new water soluble and stable thiolate/disulfide redox couple (T(-)/DS) and its use with a new zwitterionic and thiocyanate-free dye (T169) in a 100% aqueous electrolyte system. A DSSC incorporating T169 and the T(-)/DS showed the highest photocurrents (Jsc = 13.30 mA cm(-2)) and IPCE% (84%) values reported to date.

Time resolved study of three ruthenium(II) complexes at micellar surfaces: A new long excited state lifetime probe for determining critical micelle concentration of surfactant nano-aggregates.

Three different ruthenium complexes have been synthesized and their luminescence properties in different solvent environments are reported. Luminescence intensities and excited state lifetimes of Ru-I, Ru-II and Ru-III vary with solvent viscosity. The excited state lifetime of Ru-I linearly increases in the viscosity range 1.

Anti-Inflammatory and Cytostatic Activities of a Parthenolide-Like Sesquiterpene Lactone from Cota palaestina subsp. syriaca.

A sesquiterpene lactone 1-β,10-Epoxy-6-hydroxy-1,10H-inunolide (K100) was isolated through "bioassay-guided fractionation" from Cota palaestina subsp. syriaca, an Eastern Mediterranean endemic plant. K100 inhibited endotoxin- (ET-) induced proinflammatory markers: IL-6, MMP-9, and NO in normal mouse mammary SCp2 Cells.

Universal low-temperature MWCNT-COOH-based counter electrode and a new thiolate/disulfide electrolyte system for dye-sensitized solar cells.

A new thiolate/disulfide organic-based electrolyte system composed of the tetrabutylammonium salt of 2-methyl-5-trifluoromethyl-2H-[1,2,4]triazole-3-thiol (S(-)) and its oxidized form 3,3'-dithiobis(2-methyl-5-trifluoromethyl-2H-[1,2,4]triazole) (DS) has been formulated and used in dye-sensitized solar cells (DSSCs). The electrocatalytic activity of different counter electrodes (CEs) has been evaluated by means of measuring J-V curves, cyclic voltammetry, Tafel plots, and electrochemical impedance spectroscopy. A stable and low-temperature CE based on acid-functionalized multiwalled carbon nanotubes (MWCNT-COOH) was investigated with our S(-)/DS, I(-)/I3(-), T(-)/T2, and Co(II/III)-based electrolyte systems.

Photophysical properties of new cyclometalated ruthenium complexes and their use in dye sensitized solar cells.

A new class of cyclometalated ruthenium complexes, Ru(C^N^N')(N^N'^N'')·Cl where N^N'^N'' = 4,4',4''-tricarboxy-2,2':6',2''-terpyridine and C^N^N' = substituted 6-phenyl-2,2'-bipyridine, for Dye Sensitized Solar Cells (DSSCs) is proposed. We have investigated the effect of different substituents (R = COOH, thiophen-2-yl, F and OCH(3)) on the ancillary C^N^N' ligand on the photophysical properties and performance of the six different cyclometalated ruthenium complexes in DSSCs. Using an ionic liquid based electrolyte, efficiencies up to η = 3.

Enhancement of photocurrent in dye sensitized solar cells incorporating a cyclometalated ruthenium complex with cuprous iodide as an electrolyte additive.

A new cyclometalated ruthenium complex, [Ru(6'-phenyl-4'-thiophen-2-yl-[2,2']bipyridinyl-4-carboxylic acid)(4,4',4''-tricarboxy- 2,2':6',2''-terpyridine)]Cl, for Dye Sensitized Solar Cells (DSSCs) is proposed. We have investigated the use of cuprous iodide (CuI) as an electrolyte additive, which in turn has shown photocurrent enhancements of more than 25% in our dye based cells. Using an ionic liquid based electrolyte, an efficiency of η = 5.

Re-evaluation of recombination losses in dye-sensitized cells: the failure of dynamic relaxation methods to correctly predict diffusion length in nanoporous photoelectrodes.

Photocurrents generated by thick, strongly absorbing, dye-sensitized cells were reduced when the electrolyte iodine concentration was increased. Electron diffusion lengths measured using common transient techniques (L(n)) were at least two times higher than diffusion lengths measured at steady state (L(IPCE)). Charge collection efficiency calculated using L(n) seriously overpredicted photocurrent, while L(IPCE) correctly predicted photocurrent.

Application of synchronous fluorescence scan spectroscopy for size dependent simultaneous analysis of CdTe nanocrystals and their mixtures.

In this paper, synchronous fluorescence scan (SFS) spectroscopy has been applied for the first time for the simultaneous determination of a mixture of CdTe fluorescent nanocrystals (NCs) of various sizes without a pre-separation step. It is observed that synchronous fluorescence maximum correlates well with the size of the nanocrystals, i.e.

Synthesis and photophysical properties of ruthenium-based dendrimers and their use in dye sensitized solar cells.

First- and second-generation dendrimers (Ru3 and Ru6) have been synthesized, and their photophysical properties were investigated in solution and when adsorbed on the nanocrystalline TiO2 surface. The performance of Ru3 and Ru6 as charge transfer photosensitizers in nanocrytalline TiO2 based solar cells was also investigated. The best photovoltaic performance was obtained by the Ru3 based solar cell yielding a short circuit current of J sc = 5.

Photocurrent generation in layer-by-layer assembled dendrimers with ruthenium tris-bipyridine peripheral groups and a viologen-like core.

The photophysical and photoelectrochemical properties of first- and second-generation dendrimers with ruthenium tris-bipyridine peripheral groups and a tri-viologen like core (Ru3V3 and Ru6V3) were investigated in solution and when embedded within assembled films. The stepwise assembly of these dendrimers on quartz and ITO surfaces utilizing the layer-by-layer approach was investigated. The amount of the assembled dendrimers was found to increase on going to the higher generation dendrimer.

Electrostatic layer-by-layer deposition of photoactive dendrimers with triviologen-like cores on their surfaces. Synthesis and electrochemical and photocurrent generation measurements.

The stepwise assembly of Fréchet-type dendrimers with naphthalene peripheral groups and positively charged viologen-like cores on quartz and ITO surfaces utilizing the layer-by-layer approach was investigated. We were able to deposit only the (+6) charged dendrimers series on ITO. The number of assembled dendrimers was found to increase as we go to higher-generation dendrimers.

A dendrimer-based electron antenna: paired electron-transfer reactions in dendrimers with a 4,4'-bipyridine core and naphthalene peripheral groups.

Paired electron transfers (ET) induced by the absorption of two photons by synthetic dendrimers are observed in first-, second-, and third-generation dendrimers comprised of a viologen-like core and an array of naphthalene peripheral groups. Flash photolysis and transient absorption techniques show that the yield of photoinduced double ET depends on laser intensity in the two largest dendrimers, NBV2(+2) and NBV3(+2). Their photochemical behavior thus requires an unusual multiphoton kinetic scheme.