Optimization of the Mechanical Properties and the Cytocompatibility for the PMMA Nanocomposites Reinforced with the Hydroxyapatite Nanofibers and the Magnesium Phosphate Nanosheets.

Commercial poly methyl methacrylate (PMMA)-based cement is currently used in the field of orthopedics. However, it suffers from lack of bioactivity, mechanical weakness, and monomer toxicity. In this study, a PMMA-based cement nanocomposite reinforced with hydroxyapatite (HA) nanofibers and two-dimensional (2D) magnesium phosphate MgP nanosheets was synthesized and optimized in terms of mechanical property and cytocompatibility.

TEM Studies on Antibacterial Mechanisms of Black Phosphorous Nanosheets.

Purpose: Recently, two-dimensional (2D) nanomaterials are gaining tremendous attention as novel antibacterial platforms to combat against continuously evolving antimicrobial resistance levels. Among the family of 2D nanomaterials, black phosphorus (BP) nanosheets have demonstrated promising potential for biomedical applications. However, there is a need to gain nanoscale insights of the antibacterial activity of BP nanosheets which lies at the center of technical challenges.

Novel PMMA bone cement nanocomposites containing magnesium phosphate nanosheets and hydroxyapatite nanofibers.

Lack of bioactivity and monomer toxicity are limiting factors of polymethyl methacrylate (PMMA) bone cement in orthopedic applications. Herein, we address these shortcomings by proposing two-dimensional magnesium phosphate (MgP) nanosheets and hydroxyapatite (HA) nanofibers as novel fillers in PMMA bone cement nanocomposites. Two-dimensional MgP nanosheets and one-dimensional HA nanofibers were synthesized by tuning the crystallization of the sodium-magnesium-phosphate ternary system and hydrothermal homogeneous precipitation, respectively.

Solution Blowing Synthesis of Li-Conductive Ceramic Nanofibers.

Solid state electrolytes (SSEs) offer great potential to enable high-performance and safe lithium (Li) batteries. However, the scale-up synthesis and processing of SSEs is a major challenge. In this work, three-dimensional networks of lithium lanthanum titanite (LLTO) nanofibers are produced through a scale-up technique based on solution blowing.

Non-Dendritic Zn Electrodeposition Enabled by Zincophilic Graphene Substrates.

Rechargeable zinc (Zn) batteries suffer from poor cycling performance that can be attributed to dendrite growth and surface-originated side reactions. Herein, we report that cycling performance of Zn metal anode can be improved significantly by utilizing monolayer graphene (Gr) as the electrodeposition substrate. Utilizing microscopy and X-ray diffraction techniques, we demonstrate that electrodeposited Zn on Gr substrate has a compact, uniform, and nondendritic character.

On the structure and chemistry of iron oxide cores in human heart and human spleen ferritins using graphene liquid cell electron microscopy.

Ferritin is a protein that regulates the iron ions in humans by storing them in the form of iron oxides. Despite extensive efforts to understand the ferritin iron oxide structures, it is still not clear how ferritin proteins with a distinct light (L) and heavy (H) chain subunit ratio impact the biomineralization process. In situ graphene liquid cell-transmission electron microscopy (GLC-TEM) provides an indispensable platform to study the atomic structure of ferritin mineral cores in their native liquid environment.

Metal-organic framework derived 3D graphene decorated NaTi(PO) for fast Na-ion storage.

NASCION-type materials featuring super ionic conductivity are of considerable interest for energy storage in sodium ion batteries. However, the issue of inherent poor electronic conductivity of these materials represents a fundamental limitation in their utilization as battery electrodes. Here, for the first time, we develop a facile strategy for the synthesis of NASICON-type NaTi2(PO4)3/reduced graphene oxide (NTP-rGO) Na-ion anode materials from three-dimensional (3D) metal-organic frameworks (MOFs).

Elevated-Temperature 3D Printing of Hybrid Solid-State Electrolyte for Li-Ion Batteries.

While 3D printing of rechargeable batteries has received immense interest in advancing the next generation of 3D energy storage devices, challenges with the 3D printing of electrolytes still remain. Additional processing steps such as solvent evaporation were required for earlier studies of electrolyte fabrication, which hindered the simultaneous production of electrode and electrolyte in an all-3D-printed battery. Here, a novel method is demonstrated to fabricate hybrid solid-state electrolytes using an elevated-temperature direct ink writing technique without any additional processing steps.

Direct Growth of High Mobility and Low-Noise Lateral MoS -Graphene Heterostructure Electronics.

Reliable fabrication of lateral interfaces between conducting and semiconducting 2D materials is considered a major technological advancement for the next generation of highly packed all-2D electronic circuitry. This study employs seed-free consecutive chemical vapor deposition processes to synthesize high-quality lateral MoS -graphene heterostructures and comprehensively investigated their electronic properties through a combination of various experimental techniques and theoretical modeling. These results show that the MoS -graphene devices exhibit an order of magnitude higher mobility and lower noise metrics compared to conventional MoS -metal devices as a result of energy band rearrangement and smaller Schottky barrier height at the contacts.

Facet-Dependent Thermal Instability in LiCoO.

Thermal runaways triggered by the oxygen release from oxide cathode materials pose a major safety concern for widespread application of lithium ion batteries. Utilizing in situ aberration-corrected scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS) at high temperatures, we show that oxygen release from LiCoO cathode crystals is occurring at the surface of particles. We correlated this local oxygen evolution from the LiCoO structure with local phase transitions spanning from layered to spinel and then to rock salt structure upon exposure to elevated temperatures.

Selective Ionic Transport Pathways in Phosphorene.

Despite many theoretical predictions indicating exceptionally low energy barriers of ionic transport in phosphorene, the ionic transport pathways in this two-dimensional (2D) material has not been experimentally demonstrated. Here, using in situ aberration-corrected transmission electron microscopy (TEM) and density functional theory, we studied sodium ion transport in phosphorene. Our high-resolution TEM imaging complemented by electron energy loss spectroscopy demonstrates a precise description of anisotropic sodium ions migration along the [100] direction in phosphorene.

Stable and Selective Humidity Sensing Using Stacked Black Phosphorus Flakes.

Black phosphorus (BP) atomic layers are known to undergo chemical degradation in humid air. Yet in more robust configurations such as films, composites, and embedded structures, BP can potentially be utilized in a large number of practical applications. In this study, we explored the sensing characteristics of BP films and observed an ultrasensitive and selective response toward humid air with a trace-level detection capability and a very minor drift over time.