Na related nanowhisker-containing biochar obtained from self-catalyzation and functionalization of papermaking black liquor lignin with superior heavy metal immobilization capability.

In this study, papermaking black liquor lignin (ULG) was directly used to produce biochar through pyrolysis. It was found that ULG has a high ash content (15.38 %), primarily consisting of Na-related minerals.

One-Pot Synthesis of Biochar from Industrial Alkali Lignin with Superior Pb(II) Immobilization Capability.

This study synthesized biochar through a one-pot pyrolysis process using IALG as the raw material. The physicochemical properties of the resulting biochar (IALG-BC) were characterized and compared with those of biochar derived from acid-treated lignin with the ash component removed (A-IALG-BC). This study further investigated the adsorption performances and mechanisms of these two lignin-based biochars for Pb(II).

Microplastics occurrence and distribution characteristics in mulched agricultural soils of Guizhou province.

Microplastics pollution in agricultural soil is increasingly recognized, but the specific situation varies with geography, climate conditions, and farming practices. The karst landscape, a typical geomorphology in China, demands a deeper understanding of microplastics pollution in such areas. This research zeroes in on Guizhou, a province known for its karst formations, by collecting soil samples from the mulched cultivation layer in ten counties and cities.

Prediction of land use for the next 30 years using the PLUS model's multi-scenario simulation in Guizhou Province, China.

Land use changes significantly impact the structure and functioning of ecosystems. The current research focus lies in how to utilize economic and policy instruments to regulate conflicts among stakeholders effectively. The objective is to facilitate rational planning and sustainable development of land utilization resources.

Thermal Behavior and Pyrolysis Kinetics of Mushroom Residue with the Introduction of Waste Plastics.

Co-pyrolysis is considered a very promising technology for the treatment of solid wastes as it can rapidly realize the volume reduction of raw materials and obtain high value-added products. To realize the resource utilization of newly emerging solid wastes in relation to edible fungi residue and waste plastics, mushroom residue (MR), a representative of edible fungi residue, was co-pyrolyzed with waste plastic bags (PE), waste plastic lunch boxes (PP), and waste plastic bottles (PET). The thermal behavior and pyrolysis kinetics of the mixtures were investigated.

Effect of Adding De-Oiled Kitchen Water on the Bioconversion of Kitchen Waste Treatment Residue by Black Soldier Fly Larvae.

With the continuous development of society, the output of kitchen waste (KW) is fast increasing. De-oiled kitchen water (DKW) and kitchen waste treatment residue (KWTR), two main by-products of the KW treatment industry, are produced accordingly on a large scale. The need to develop an effective technique for the utilization of DKW and KWTR is attracting wide attention.

Characterization and nutritional value of hydrothermal liquid products from distillers grains.

Hydrothermal liquid products (HLPs) produced by hydrothermal treatment (HTT) contain a large amount of nitrogen, phosphorus and other substances, while the environmental problems caused by arbitrary discharge. This work explored the effects of temperature, reaction time and solid-liquid ratio on the chemistry of HLPs of two different distillers grains, with a focus on nutrient composition. Increased HTT temperature was related to increased HLPs pH, dissolved organic carbon content, and aromaticity, and decreased electrical conductivity.

Effective Sb(V) removal from aqueous solution using phosphogypsum-modified biochar.

Antimonate is the dominant form of antimony (Sb) in Sb mine water. The treatment of high-Sb mine water essentially reduces the discharge of antimonate oxyanions ([Sb(OH)]) in it. Biochar obtained from phosphogypsum-modified anaerobic digested distillers' grain (PADC) can effectively adsorb antimonate from water.

Adsorption of Polycyclic Aromatic Hydrocarbons from aqueous solution by Organic Montmorillonite Sodium Alginate Nanocomposites.

The adsorption method is generally considered a promising technique to remove inorganic and organic contaminants in an economically and environmentally friendly superior manner. In this study, organic montmorillonite sodium alginate composites were prepared, in which, montmorillonite and cationic surfactant (cetyltrimethylammonium bromide, CTAB) in different added amounts were coagulated with sodium alginate using CaCl as the crosslinking agent. The morphological properties of the composites were characterized thoroughly and employed in three typical target pollutants of polycyclic aromatic hydrocarbons (PAHs) (acenaphthene, fluorene, and phenanthrene) by batch adsorption experiments from aqueous solution.

Phosphogypsum as a novel modifier for distillers grains biochar removal of phosphate from water.

A novel biochar composite was fabricated via the pyrolysis of distillers grains treated phosphogypsum for phosphate removal from water. Batch adsorption experiments were performed on the adsorption characteristics of phosphate. Effects of pyrolysis temperature, solution pH, the dosage of adsorbent, ambient temperature on phosphate adsorption were also investigated.

Acidic leaching of potentially toxic metals cadmium, cobalt, chromium, copper, nickel, lead, and zinc from two Zn smelting slag materials incubated in an acidic soil.

A column leaching study, coupled with acid deposition simulation, was conducted to investigate the leaching of potentially toxic metals (PTM) from zinc smelting slag materials (SSM) after being incubated in an acid Alfisol for 120 days at room temperature. Two SSMs (SSM-A: acidic, 10 yrs exposure with moderate high PTM concentrations versus SSM-B: alkaline, 2 yrs exposure with extremely high PTM concentrations), were used for the incubation at 0.5, 1, 2.

Profile distribution and accumulation characteristics of organic carbon in a karst hillslope based on particle-size fractionation and stable isotope analysis.

Recent studies have highlighted tight coupling between soil aggregate fractions and soil organic carbon (SOC) turnover. However, large uncertainties remain and a mechanistic understanding of geomorphic and land use change effects on carbon storage in soil is still lacking. Taking typical slope of vegetation recovery in karst area as object, the present study analyzed organic carbon content and stable carbon isotope composition (δ13C value) of soil organic matter in bulk and particle size separates of soil on profiles at different topographic positions.

Leaching of cadmium, chromium, copper, lead, and zinc from two slag dumps with different environmental exposure periods under dynamic acidic condition.

Over the past few decades, zinc smelting activities in Guizhou, China have produced numerous slag dumps, which are often dispersed on roadsides and hill slopes throughout the region. During periods of acid rain, these exposed slags release heavy metals into surface water bodies. A column leaching study was designed to test the potential release of the heavy metals cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), and zinc (Zn) under simulated acid rain events.

Natural and anthropogenic lead in soils and vegetables around Guiyang city, southwest China: a Pb isotopic approach.

Soils, vegetables and rainwaters from three vegetable production bases in the Guiyang area, southwest China, were analyzed for Pb concentrations and isotope compositions to trace its sources in the vegetables and soils. Lead isotopic compositions were not distinguishable between yellow soils and calcareous soils, but distinguishable among sampling sites. The highest (207)Pb/(206)Pb and (208)Pb/(206)Pb ratios were found for rainwaters (0.

Lead, zinc, and cadmium in vegetable/crops in a zinc smelting region and its potential human toxicity.

Lead, Zn, and Cd in vegetables/crops were investigated in a zinc smelting region in China, and their daily dietary intake by local residents was estimated. It is observed that Pb, Zn, and Cd were in 34.7-91.

[Sulfur isotopic ratios indicating sulfur cycling in slope soils of karst areas].

Sequential extraction methods for soil sulfur were used to determine delta34 S ratios and sulfur contents of total sulfur, organic sulfur, SO4(21) and FeS2 in slope soils of karst areas. In general, FeS2 has the lowest delta34 S ratios, ranging from -6.86% per hundred to -4.

Allocation and source attribution of lead and cadmium in maize (Zea mays L.) impacted by smelting emissions.

Plants grown in contaminated areas may accumulate trace metals to a toxic level via their roots and/or leaves. In the present study, we investigated the distribution and sources of Pb and Cd in maize plants (Zea mays L.) grown in a typical zinc smelting impacted area of southwestern China.

Heavy metals in an impacted wetland system: a typical case from southwestern China.

Historical zinc smelting in Hezhang, southwestern China, has resulted in significant heavy metal contamination of the surrounding ecosystems. The Caohai wetland system, which is an important national nature reserve close to the Hezhang zinc smelting area, was investigated in the present study. Results showed that sediments from the Caohai wetland system have been seriously contaminated by Cd, Pb and Zn with the highest concentrations in the surface sediments being up to 71, 160 and 1,200 microg g(-1), respectively.

Environmental contamination of heavy metals from zinc smelting areas in Hezhang County, western Guizhou, China.

Total heavy metal (Cd, Cr, Cu, Pb and Zn) concentrations were evaluated in smelting waste, soil, crop and moss samples collected from the Hezhang artisanal zinc smelting areas, Guizhou, China. Soil samples from the cornfield near the smelting sites contained extremely high Cd (5.8-74 mg kg(-1)), Pb (60-14,000 mg kg(-1)) and Zn (260-16,000 mg kg(-1)) concentrations.