Longitudinal bond strength of a universal adhesive and chemical dentin characterization under different acid etching protocols.

Objective: This study aimed to analyze the longitudinal bond strength of a universal adhesive and chemically characterize the dentin substrate under different acid etching protocols.

Methodology: Dentin samples were etched with polyacrylic acid 25% (PAA) for 10 seconds (n=3) and phosphoric acid 32% (PA) for 15 seconds (n=3) and analyzed by Fourier transform infrared spectroscopy - attenuated total reflectance (FTIR-ATR) before and after treatment. For collagen degradation, samples (n=12) were divided into 3 groups: PAA, PA, and Deionized water (control), and analyzed by the quantity of solubilized type I collagen C-terminal cross-linked telopeptides and solubilized C-terminal peptide in relation to total protein concentration (ICTPtp and CTXtp) and by their ultimate tensile strength (UTS).

Effect of fluoride, chlorhexidine or Nd:YAG on the progression of root dentin demineralization after removal of the demineralized organic matrix.

Objectives: Quantification of collagen degradation is an important parameter to evaluate dentin caries for preventive aid.. Evaluate preventive methods against root collagen degradation by the hydroxyproline assay (HYP) and microradiography technique (MRT).

How Water Content Can Influence the Chemomechanical Properties and Physical Degradation under Aging of Experimental Adhesives.

Objective: To evaluate the physicochemical (sorption (SOR), solubility (SOL), and degree of conversion (DC)) and mechanical (flexural strength (FS), modulus of elasticity (ME), and compressive strength (CS)) properties of adhesives with different water contents (DO).

Materials And Methods: An adhesive was formulated: 55 wt% BisGMA, 45 wt% HEMA, 0.5 wt% camphorquinone, 0.

Universal adhesive: the effect of different simulated pulpal pressure fluids and bonding modes to dentin.

The aim of this study was to evaluate the effect of SPP with either fetal bovine serum (FBS) or deionized water (DW) on the bond strength (μTBS) of a Universal adhesive to dentin, in both etch-and-rinse (ER) and self-etch (SE) modes. The kinematic viscosity (cSt) of FBS and DW was measured at 25 °C ± 0.1 ºC.

Polyphenol-enriched extract of Arrabidaea chica used as a dentin pretreatment or incorporated into a total-etching adhesive system: Effects on bonding stability and physical characterization.

The aim of this paper was to evaluate the physical properties and the long-term bond strength of a 2.5% polyphenol-enriched extract of Arrabidaea chica (AC) incorporated into both the phosphoric acid and the primer of a three-step total-etch adhesive, or into an aqueous solution as a dentin pretreatment. Fifty dentin surfaces received the treatments (n = 10): CON (control) - application of the three-step adhesive system (Adper Scotchbond Multipurpose, 3M ESPE); WAT - distilled water used as a pretreatment after dentin etching and before application of the adhesive system; ACPA - AC incorporated into the phosphoric acid; ACW - dentin pre-treatment with AC incorporated into an aqueous solution after etching; ACP - AC incorporated into the primer.

Diffusion of hydroxyl ion on external root surface using different irrigating solutions: An study.

Aims: The aim of this study was to evaluate the diffusion of hydroxyl ion to the external root surface using different irrigating solutions and intracanal medication with calcium hydroxide.

Materials And Methods: Sixty bovine tooth roots were randomly divided into six experimental groups (n = 10), according to the irrigating substance used during biomechanical preparation: 12% glycolic propolis extract (PROP); 20% glycolic ginger extract (GENG); 2% sodium hypochlorite with surfactant (NaOClS); 2% chlorhexidine gel (CLX); 2.5% sodium hypochlorite (NaOCl); and physiological saline solution.

Surface degradation of composite resins under staining and brushing challenges.

Background/purpose: The primeval evaluation of the properties of composite resins with different compositions that impact clinical behavior is very important in guiding use in clinical settings. The aim of this study was to evaluate color stability (ΔE) and Knoop microhardness (KHN) of composite resins containing different compositions.

Materials And Methods: Forty-five disks were made composite resins: Filtek Z350 XT/3MESPE and Beautifill II/SHOFU and divided into 3 subgroups: Control - immersed in artificial saliva; OB - brushing with Oral B 3D White; CT - brushing with Colgate Total 12.

Mechanical-physicochemical properties and biocompatibility of catechin-incorporated adhesive resins.

Objectives: Several anti-proteolytic dentin therapies are being exhaustively studied in an attempt to reduce dentin bond degradation and improve clinical performance and longevity of adhesive restorations. This study assessed the effect of epigallocatechin-3-gallate (EGCG) on long-term bond strength when incorporated into adhesives.

Material And Methods: Adhesive systems were formulated with EGCG concentrations of 0 wt%: (no EGCG; control); 0.

Effect of ethylenediaminetetraacetic acid and hyaluronic acid on the viability and cytokine expression of periodontal ligament fibroblasts.

Background/aims: Dental root cell proliferation following tooth avulsion has not been well researched. Understanding the effects of dry time and dentin treatment influences on cell proliferation is essential to provide evidence-based guidelines for tooth replantation. The study evaluated the viability of periodontal ligament fibroblasts (PLF) in contact with roots, submitted to surface treatments with ethylenediaminetetraacetic acid (EDTA) and hyaluronic acid (HA) at different times, including to quantify inflammatory cytokines interleukin (IL)-6, IL-8, IL-1β and TNF-α expressed by PLF.

Influence of Zingiber officinale Extract on Push-Out Bond Strength of Glass-Fiber Post.

The aim of this study was to evaluate in vitro the influence of 20% glycolic ginger extract on the bond strength of glass-fiber post cemented with etch-and-rinse or self-etching resin cement. Forty-eight bovine roots were standardized (17±0.5 mm) and randomly divided into two groups, according to irrigant used during biomechanical preparation: NaOCl: 1% sodium hypochlorite and GEN: 20% glycolic ginger extract.

Resin-dentin bond stability and physical characterization of a two-step self-etching adhesive system associated with TiF.

Objectives: To evaluate the bond strength to superficial (SD) and deep (DD) dentin after the use of 2.5% (T2.5%) or 4% (T4%) titanium tetrafluoride (TiF) in aqueous solution as a dentin pretreatment, or when incorporated into the primer (T2.

The combined effect of food-simulating solutions, brushing and staining on color stability of composite resins.

This study evaluated the effect of food-simulating media associated with brushing and coffee staining on color stability of different composite resins. Eighty specimens were prepared for each composite: Grandio SO (Voco), Amaris (Voco), Filtek Z350XT (3M/ESPE), Filtek P90 (3M/ESPE). They were divided into four groups according to food-simulating media for 7 days: artificial saliva (control), heptane, citric acid and ethanol.

Staining Beverages and Cigarette Smoke on Composite Resin and Human Tooth Fluorescence by Direct Spectrometry.

Introduction: This study evaluated the fluorescence intensity (FI) of different brands of composite resins (CRs) and compare those values with the FI of human tooth, under the action of cigarette smoke (CI), coffee (CA), and soft drink (CO), measured by direct spectrometry.

Materials And Methods: A total of 30 specimens of each brand (Filtek Z350, Esthet-X, Amelogen, Durafill) were made. Others 30 tooth specimens (3 mm/diameter) were obtained from human molars using a trephine bur.

Effects of Different Polishing Protocols on Lithium Disilicate Ceramics.

The aim of this study was to evaluate the effect of different polishing protocols on surface roughness and morphology of lithium disilicate ceramics (IPS e.max CAD). Fifty ceramic bars (2.

Polishing for glass ceramics: which protocol?

Purpose: The execution of adjustments on ceramic restorations is sometimes necessary for either correction of occlusion and/or inadequate contours or esthetical improvements. Clinically, the surfaces undergo weariness through fine grinding diamond burs which remove the superficial glazing layer. Several materials for ceramic polishing have been used in an attempt to reach a satisfactory surface smoothness.