Classification and application of metal-based nanoantioxidants in medicine and healthcare.

Antioxidants play an important role in the prevention of oxidative stress and have been widely used in medicine and healthcare. However, natural antioxidants have several limitations such as low stability, difficult long-term storage, and high cost of large-scale production. Along with significant advances in nanotechnology, nanomaterials have emerged as a promising solution to improve the limitations of natural antioxidants because of their high stability, easy storage, time effectiveness, and low cost.

A rare case report of acute upper gastrointestinal hemorrhage due to splenic artery pseudoaneurysm.

Splenic artery aneurysm and splenic artery pseudoaneurysm are rare vascular pathologies. The splenic artery represents the third most common site for intra-abdominal aneurysms. In contrast with true splenic artery aneurysm, splenic artery pseudoaneurysm is typically symptomatic, presenting with a range of symptoms, from abdominal pain to hemodynamic instability due to rupture.

Enhanced Sensitivity and Detection of Near-Infrared Refractive Index Sensor with Plasmonic Multilayers.

In this work, the multilayer of the surface plasmon resonance (SPR) sensor was optimized to achieve the maximum sensor sensitivity. By optimizing the thickness of the silver layer (Ag) and dielectric films (TiO and AlAs), the optimum sensitivity of the SPR sensor could be obtained. The performance of the SPR sensor proposed was compared with control simulations utilizing zinc oxide (ZnO) and molybdenum oxide (MoO).

Diagnosis and management of calcaneal Yakes type IV AVM: Two case reports.

Peripheral arteriovenous malformations (AVMs) are rare, congenital anomalies resulting from developmental genetic defects of the vasculature and cause significant disturbances in daily activities. AVMs can affect any part of the body and are rarely observed in the calcaneal region. Here, we describe two cases of Yakes type IV calcaneal AVMs managed by ethanol sclerotherapy at our institute.

Adsorptive Removal of Iron Using SiO Nanoparticles Extracted from Rice Husk Ash.

In this work, SiO nanoparticles were prepared by the sol-gel method after sodium silicate was extracted from rice husk ash (RHA) under various experimental conditions such as types of acids, NaOH concentration, dissolved time, and temperature and used for removal of Fe ions from aqueous solutions. The extracted SiO was morphologically and chemically characterized and showed a surface area of 78 m/g and uniform pores of 2.71 nm, offering high adsorption capacity for Fe ions.

Blood-based immunoassay of tau proteins for early diagnosis of Alzheimer's disease using surface plasmon resonance fiber sensors.

We present the immunoassay of tau proteins (total tau and phosphorylated tau) in human sera using surface plasmon resonance (SPR) fiber sensors. This assay aimed at harvesting the advantages of using both SPR fiber sensors and a blood-based assay to demonstrate label-free point-of-care-testing (POCT) patient-friendly assay in a compact format for the early diagnosis of Alzheimer's disease (AD). For conducting the assay, we used human sera of 40 subjects divided into halves, which were grouped into AD patients and control groups according to a number of neuropsychological tests.

A regenerative label-free fiber optic sensor using surface plasmon resonance for clinical diagnosis of fibrinogen.

Purpose: We present the regenerative label-free fiber optical biosensor that exploits surface plasmon resonance for quantitative detection of fibrinogen (Fbg) extracted from human blood plasma.

Materials And Methods: The sensor head was made up of a multimode optical fiber with its polymer cladding replaced by metal composite of nanometer thickness made of silver, aluminum, and nickel. The Ni layer coated allowed a direct immobilization of histidine-tagged peptide (HP) on its metal surface without an additional cross-linker in between.

Optical birefringence of liquid crystals for label-free optical biosensing diagnosis.

Purpose: We present a polarization-sensitive optical detection platform for label-free quantitative optical biosensing diagnosis using liquid crystals (LCs). This is capable of determining quantitatively the optical birefringence of optical cells containing LCs, whose orientation depends on the immobilized biomolecules.

Patients And Methods: This technique uses a polarization-dependent double-port detection without any polarizer at a single wavelength and removes the need of aligning optical cells of LCs in the azimuthal direction, with respect to the light path through the optical cell.

Bimetal coated optical fiber sensors based on surface plasmon resonance induced change in birefringence and intensity.

We present a surface plasmon resonance (SPR) based multimode fiber sensor with non-golden bimetallic coating. Our detection scheme used, which is capable of measuring the combined effects of SPR-induced birefringence and intensity changes, supported the minimum resolvable refractive index (RI) of 5.8 × 10(-6) RIU with the operating RI range of 0.

Deprotonative metalation of chloro- and bromopyridines using amido-based bimetallic species and regioselectivity-computed CH acidity relationships.

A series of chloro- and bromopyridines have been deprotometalated by using a range of 2,2,6,6-tetramethylpiperidino-based mixed lithium-metal combinations. Whereas lithium-zinc and lithium-cadmium bases afforded different mono- and diiodides after subsequent interception with iodine, complete regioselectivities were observed with the corresponding lithium-copper combination, as demonstrated by subsequent trapping with benzoyl chlorides. The obtained selectivities have been discussed in light of the CH acidities of the substrates, determined both in the gas phase and as a solution in THF by using the DFT B3LYP method.

Deprotonative metalation of aromatic compounds by using an amino-based lithium cuprate.

Deprotonative cupration of aromatic compounds by using amino-based lithium cuprates was optimized with 2,4-dimethoxypyrimidine and 2-methoxypyridine as the substrates and benzoyl chloride as the electrophile. [(tmp)(2)CuLi] (+2 LiCl) (tmp=2,2,6,6-tetramethylpiperidino) was identified as the best reagent and its use was extended to anisole, 1,4-dimethoxybenzene, other substituted pyridines, furan, thiophene and derivatives, and N-Boc-indole (Boc=tert-butyloxycarbonyl). Of the electrophiles employed to attempt the interception of the generated aryl cuprates, aroyl chlorides, iodomethane, and diphenyl disulfide efficiently reacted.

Direct metalation of heteroaromatic esters and nitriles using a mixed lithium-cadmium base. Subsequent conversion to dipyridopyrimidinones.

All pyridine nitriles and esters were metalated at the position next to the directing group using (TMP)(3)CdLi in tetrahydrofuran at room temperature. The 2-, 3-, and 4-cyanopyridines were treated with 0.5 equiv of base for 2 h to afford, after subsequent trapping with iodine, the corresponding 3-iodo, 2-iodo, and 3-iodo derivatives, respectively, in yields ranging from 30 to 61%.

Deprotonative metalation of functionalized aromatics using mixed lithium-cadmium, lithium-indium, and lithium-zinc species.

In situ mixtures of CdCl(2)TMEDA (0.5 equiv; TMEDA = N,N,N',N'-tetramethylethylenediamine) or InCl(3) (0.33 equiv) with [Li(tmp)] (tmp = 2,2,6,6-tetramethylpiperidino; 1.