Advanced statistical analyses to reduce inconsistencies in bond strength data focused on donor factors: A six-factor analysis using linear mixed and nonlinear regression models.

Purpose: This study aimed to investigate the effects of the age and sex of tooth donors on dentin bond strength.

Methods: A total of 38 extracted teeth (12 male and 26 female donors; age range: 17-82 years) were used in this study. In addition to donor age and sex, four other microtensile bond strength (μTBS) test specimen factors were evaluated: dentin position, bonding area, presence of voids at the interface, and computed tomography (CT) values of dentin.

Do resin core build-ups obtain the benefits of higher bonding ability from direct or indirect technique?

Purpose This study evaluated the effects of different materials (composite resin system including a photo-cure adhesive (DC) vs. resin cement system including a self-etching primer (PV)) and techniques (direct vs. indirect) for resin core build-up on the bonding performance to root canal dentin.

Effectiveness of pretreatment with phosphoric acid, sodium hypochlorite and sulfinic acid sodium salt on root canal dentin resin bonding.

Purpose: The purpose of this study was to evaluate the effect of pretreatment using phosphoric acid, sodium hypochlorite and sulfinic acid sodium salt on the bonding of one-step self-etching adhesives to root canal dentin.

Methods: Thirty-six single-rooted sound human premolars were randomly assigned into three groups before applying the one-step self-etching adhesive. These comprised a control group with no pretreatment, an NC group that received phosphoric acid and subsequent sodium hypochlorite gel pretreatments, and an NC+AC group that received an additional treatment with sulfinic acid sodium salt following the same pretreatment applied to the NC group.

Effects of three drying methods of post space dentin bonding used in a direct resin composite core build-up method.

Purpose: The purpose of this study was to evaluate drying methods for post space dentin bonding in a direct resin composite core build-up method.

Methods: Experiment 1: Four root canal plastic models, having diameters of 1.0 or 1.

Effectiveness of sodium hypochlorite and sulfinic acid sodium salt treatment on dentin-resin bonding: Long-term durability of one-step self-etching adhesive.

This study aimed to evaluate the effect of sulfinic acid sodium salt interposition after acid and sodium hypochlorite treatment (NC treatment) on dentin bonding durability using a mild type one-step self-etching adhesive. Fifteen human third molars were randomly assigned into three experimental groups according to dentin pretreatment before applying the one-step self-etching adhesive: Cont group, without pretreatment; NC group, pretreatment with phosphoric acid and sodium hypochlorite gel; and NC+AC group, additional treatment with sulfinic acid sodium salt followed by the same pretreatment of the NC group. Microtensile bond strength was measured and the pre-treated dentin surface, fracture modes, and bonding interface were observed.

Adhesion procedure for CAD/CAM resin crown bonding: Reduction of bond strengths due to artificial saliva contamination.

Purpose: The present study aimed to elucidate how saliva contamination affects microtensile bond strength of resin cement to CAD/CAM resin blocks and identify a decontamination method that can restore original bond strength.

Methods: The KATANA AVENCIA block (Kuraray Noritake Dental) was sandblasted on the adherend surface (P-Co group). Then, the block was contaminated with artificial saliva (Saliveht Aerosol, Teijin).

Bonding effectiveness and multi-interfacial characterization of two direct buildup resin core systems bonded to post-space dentin.

Objectives: The aim of the present study was to evaluate the bonding effectiveness of two resin core buildup systems using conventional methods in the field of adhesive dentistry and a new non-destructive method.

Materials And Methods: Twenty-four single-rooted human teeth were built up with dual-cure one-step self-etch adhesive and composite systems (SY1: Clearfil DC bond and Clearfil DC core automix, SY2: Clearfil bond SE one and Clearfil DC core automix one). The prepared samples were sectioned into approximately 1 × 1-mm-thick beams and subjected to micro-tensile bond strength (μTBS) testing (n = 24).

Bonding effectiveness of self-adhesive and conventional-type adhesive resin cements to CAD/CAM resin blocks. Part 2: Effect of ultrasonic and acid cleaning.

The present study assessed the effect of ultrasonic and acid cleaning on resin cement bonding to CAD/CAM resin blocks. One of two resin cements, PANAVIA V5 (PV5) or PANAVIA SA CEMENT HANDMIX (PSA), were bonded to one of 24 CAD/CAM blocks (KATANA AVENCIA BLOCK). Each cement group was divided into four subgroups: no cleaning (Ctl), ultrasonic cleaning (Uc), acid cleaning (Ac) and Uc+Ac.

Bonding effectiveness of self-adhesive and conventional-type adhesive resin cements to CAD/CAM resin blocks. Part 1: Effects of sandblasting and silanization.

The present study assessed the effect of sandblasting and silanization on resin cement bond strengths to CAD/CAM resin blocks. Twenty four blocks (KATANA AVENCIA BLOCK) were divided into two resin cement groups (PANAVIA V5 [PV5] and PANAVIA SA CEMENT HANDMIX [PSA]), and further divided into four subgroups representing different surface treatment methods: no treatment (Ctl), silanization (Si), sandblasting (Sb), and Sb+Si. After resin application, microtensile bond strengths (μTBSs) were measured immediately, 1, 3 and 6 months after water storage.

Nondestructive observation of teeth post core-space using optical coherence tomography: comparison with microcomputed tomography and live images.

No previous reports have observed inside the root canal using both optical coherence tomography (OCT) and x-ray microcomputed tomography (μCT) for the same sample. The purpose of this study was to clarify both OCT and μCT image properties from observations of the same root canal after resin core build-up treatment. As OCT allows real-time observation of samples, gap formation may be able to be shown in real time.

Nondestructive observation of teeth post core space using optical coherence tomography: a pilot study.

Coronal tooth lesions, such as caries, enamel cracking, and composite resin restoration cavities, have been observed by optical coherence tomography (OCT). This pilot study was performed to verify whether OCT could reveal details of root canals filled with resin core build-up. A dual-cure, one-step, self-etch adhesive system-bonding agent (Clearfil Bond SE ONE, Kuraray Noritake Dental) and dual-cure resin composite core material (Clearfil DC Core Automix ONE, Kuraray Noritake Dental) were used according to the manufacturer's instructions in root canals.