Spontaneous Heterointerface Modulation by a Methylammonium Tetrafluoroborate Additive for a Narrow-Bandgap FAPbI Photoabsorber in Perovskite Solar Cells.

Over the past decade, the photovoltaic (PV) performance of perovskite solar cells (PSCs) has been considerably improved with the development of perovskite photoabsorbers. Among these, formamidinium-lead-iodide (FAPbI) is a promising photoabsorber owing to its narrow bandgap and is mainly used in n-i-p-structured PSCs. The property modulation of FAPbI photoabsorbers while retaining their narrow bandgap is imperative for further development of PSCs.

Effect of Humidity on Crystal Growth of CuSCN for Perovskite Solar Cell Applications.

Copper(I) thiocyanate (CuSCN) is one of the most robust hole-transport materials for perovskite solar cells (PSCs). However, the power conversion efficiency of CuSCN-based PSCs is low due to difficulty in crystallization of CuSCN. In this study, we focused on humidity conditions during the aging process of CuSCN-based PSCs to improve their performance.

Grown Nanocrystalline Si Recombination Junction Layers for Efficient Perovskite-Si Monolithic Tandem Solar Cells: Toward a Simpler Multijunction Architecture.

The perovskite-Si tandem is an attractive avenue to attain greater power conversion efficiency (PCE) than their respective single-junction solar cells. However, such devices generally employ complex stacks with numerous deposition steps, which are rather unattractive from an industrial perspective. Here, we develop a simplified tandem architecture consisting of a perovskite n-i-p stack on a silicon heterojunction structure without applying the typically used indium-tin-oxide (ITO) recombination junction (RJ) layer between the top and bottom cells.

A Sodium Chloride Modification of SnO Electron Transport Layers to Enhance the Performance of Perovskite Solar Cells.

A sodium chloride modification was applied where different amounts of sodium chloride was physically blended in a tin oxide colloid solution to passivate the interface between the electron transport layer (ETL) and perovskite layer and improve the performance of perovskite solar cells. Sodium chloride-modified tin oxide was utilized as the electron transport material to fabricate perovskite solar cells. It was found that sodium chloride-modified tin oxide as an ETL could considerably enhance the performance of the device compared to pristine tin oxide.

Highly Efficient 17.6% Tin-Lead Mixed Perovskite Solar Cells Realized through Spike Structure.

Frequently observed high V loss in tin-lead mixed perovskite solar cells is considered to be one of the serious bottle-necks in spite of the high attainable Jsc due to wide wavelength photon harvesting. An amicable solution to minimize the V loss up to 0.50 V has been demonstrated by introducing an n-type interface with spike structure between the absorber and electron transport layer inspired by highly efficient Cu(In,Ga)Se solar cells.

Adjustment of Conduction Band Edge of Compact TiO Layer in Perovskite Solar Cells Through TiCl Treatment.

Perovskite solar cells (PSCs) without a mesoporous TiO layer, that is, planar-type PSCs exhibit poorer cell performance as compared to PSCs with a porous TiO layer, owing to inefficient electron transfer from the perovskite layer to the compact TiO layer in the former case. The matching of the conduction band levels of perovskite and the compact TiO layer is thus essential for enhancing PSC performance. In this study, we demonstrate the shifting of the conduction band edge (CBE) of the compact TiO layer through a TiCl treatment, with the aim of improving PSC performance.

Hysteresis-free perovskite solar cells made of potassium-doped organometal halide perovskite.

Potassium-doped organometal halide perovskite solar cells (PSCs) of more than 20% power conversion efficiency (PCE) without I-V hysteresis were constructed. The crystal lattice of the organometal halide perovskite was expanded with increasing of the potassium ratio, where both absorption and photoluminescence spectra shifted to the longer wavelength, suggesting that the optical band gap decreased. In the case of the perovskite with the 5% K, the conduction band minimum (CBM) became similar to the CBM level of the TiO-Li.

Synthesis of Oligo(thienylene-vinylene) by Regiocontrolled Deprotonative Cross-Coupling.

Concise synthesis of oligo(thienylene-vinylene) with a head-to-tail type structure is achieved by regioselective deprotonative coupling of 3-hexylthiophene. The palladium catalyzed reaction of 3-hexylthiophene with (E)-2-(2-bromoethenyl)-3-hexylthiophene takes place to afford head-to-tail type trans-1,2-dithienylethene. Further extension of a vinylthiophene unit is similarly performed in an iterative manner.

An Alkyloxyphenyl Group as a Sterically Hindered Substituent on a Triphenylamine Donor Dye for Effective Recombination Inhibition in Dye-Sensitized Solar Cells.

Recombination reactions in dye-sensitized solar cells (DSSCs) may substantially decrease the open-circuit voltage (Voc) with cobalt complex redox electrolyte. Managing steric hindrance in the dye structure is necessary to inhibit recombination reactions and thereby increase the Voc and achieve high power-conversion efficiency (PCE). New dyes with large-sized donors based on triphenylamine and modified with 4-(hexyloxy)phenyl groups were developed to identify an effective inhibitor for the recombination reaction in DSSCs with a cobalt complex redox electrolyte.

Crystallization Dynamics of Organolead Halide Perovskite by Real-Time X-ray Diffraction.

We analyzed the crystallization process of the CH3NH3PbI3 perovskite by observing real-time X-ray diffraction immediately after combining a PbI2 thin film with a CH3NH3I solution. A detailed analysis of the transformation kinetics demonstrated the fractal diffusion of the CH3NH3I solution into the PbI2 film. Moreover, the perovskite crystal was found to be initially oriented based on the PbI2 crystal orientation but to gradually transition to a random orientation.

Modulation of Electron Injection Dynamics of Ru-Based Dye/TiO2 System in the Presence of Three Different Organic Solvents: Role of Solvent Dipole Moment and Donor Number.

In the present work, femtosecond transient absorption spectroscopy (fs-TAS) has been employed to investigate the electron injection efficiency (EIE) both from the singlet and triplet excited states of a well-known ruthenium dye (N719) to the conduction band (CB) of nanostructured TiO(2) in presence of three different organic solvents [γ-butylactone (GBL), 3-methoxypropionitrile (MPN), and dimethylformamide (DMF)] with different donor numbers (DNs) and dipole moments (DMs). The DM and DN of a solvent modulates the CB edge energy of TiO(2), and this effect reflects well in the fs-TAS results, which shows an EIE trend following the order GBL≥MPN≫DMF, that is, highest in GBL and lowest in DMF solvent environments. Fs-TAS results indicate a lower contribution of electron injection from both the singlet and triplet states in DMF, for which the dominant adsorption of DMF molecules on the TiO(2) surface seems to play an important role in the mechanism.

Structural effect of donor in organic dye on recombination in dye-sensitized solar cells with cobalt complex electrolyte.

The effect of the donor in an organic dye on the electron lifetime of dye-sensitized solar cells (DSSCs) employing a cobalt redox electrolyte was investigated. We synthesized organic dyes with donor moieties of carbazole, coumarin, triphenylamine, and N-phenyl-carbazole and measured the current-voltage characteristics and electron lifetimes of the DSSCs with these dyes. The cell with the triphenylamine donor dye produced the highest open circuit voltage and longest electron lifetime.

Improvement of TiO2/dye/electrolyte interface conditions by positional change of alkyl chains in modified panchromatic Ru complex dyes.

A series of panchromatic ruthenium sensitizers (MJ sensitizers) with attached thiophene and phenyl units bearing alkyl chains was synthesized. A new synthetic route was used to examine all possible positions for the alkyl chains. The absorption spectra showed the sum of a ruthenium complex and peripheral organic chromophore units.

Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites.

The energy costs associated with separating tightly bound excitons (photoinduced electron-hole pairs) and extracting free charges from highly disordered low-mobility networks represent fundamental losses for many low-cost photovoltaic technologies. We report a low-cost, solution-processable solar cell, based on a highly crystalline perovskite absorber with intense visible to near-infrared absorptivity, that has a power conversion efficiency of 10.9% in a single-junction device under simulated full sunlight.

Immobilization and enzymatic activity of glucose oxidase on polystyrene surface modified with ozone aeration and UV irradiation in distilled water and/or aqueous ammonia solution.

Adsorption condition and enzymatic activity of glucose oxidase (GOD) on polystyrene (PS) film surfaces modified with ozone aeration and UV irradiation (O3/UV) treatment were investigated. The total amount of GOD immobilized on the PS film modified with the O3/UV treatment in distilled water (PS-W film) was approximately twice as large as that on the film treated in an aqueous ammonia solution (PS-A film), whereas the specific activity of GOD on the PS-A film was four times higher than that on the PS-W film. In contrast, no enzymatic activity of GOD on the non-treated PS film was observed because of irreversible denaturation of the adsorbed GOD.

A high-voltage dye-sensitized photocapacitor of a three-electrode system.

A high-voltage photo-rechargeable capacitor (photocapacitor) of three-electrode configuration, comprising a dye-sensitized mesoporous TiO2 electrode, two carbon-coated electrodes, and two liquid electrolytes, attained a charge-state voltage of 0.8 V and high energy density per area of 47 microW h cm(-2) which is five times larger than the previous two-electrode photocapacitor.