Innovative One-Step Sustainable Process to Produce Simonkolleite Nanoparticles.

The aim of the present paper is to propose an innovative, one-step and sustainable process allowing us to obtain almost 10 kg/week of pure and crystalline simonkolleite nanoparticles (SK NPs) in only 8 min of reaction, working in water, under ambient conditions of pressure/temperature, guaranteeing at the same time low environmental impact and a high yield of NP production. In addition, the obtained NPs can also act as ZnO precursors at ambient temperature, and this result supports the sustainability of the process considering that, generally, the production of ZnO from SK occurred via annealing at high temperatures. The SK NPs appeared pure and crystalline, characterized by a highly uniform hexagonal lamellar feature.

MgO Nanoparticles Obtained from an Innovative and Sustainable Route and Their Applications in Cancer Therapy.

This paper aimed to evaluate the biological damages towards diseased cells caused by the use of MgO nanoparticles (NPs). The NPs are produced by a calcination process of a precursor, which is an aqueous suspension of nanostructured Mg(OH), in turn synthesized following our original, time-energy saving and scalable method able to guarantee short times, high yield of production (up to almost 10 kg/week of NPs), low environmental impact and low energy demand. The MgO NPs, in the form of dry powders, are organized as a network of intercrystallite channels, in turn constituted by monodispersed and roughly spherical NPs < 10 nm, preserving the original pseudo hexagonal-platelet morphology of the precursor.

New Eco-Friendly and Low-Energy Synthesis to Produce ZnO Nanoparticles for Real-World Scale Applications.

This paper presents an original and sustainable method for producing ZnO nanoparticles (NPs) in response to global challenges (low energy requirements, low environmental impact, short production times, and high production yield). The method is based on an ion exchange process between an anionic resin and an aqueous ZnCl solution; it operates in one step at room temperature/ambient pressure without the need for complex apparatus or purification steps. From the kinetics, we observed the formation of pure simonkolleite, a zinc-layered hydroxide salt (Zn(OH)Cl·HO), after only 5 min of reaction.

New Materials and Technologies for Durability and Conservation of Building Heritage.

The increase in concrete structures' durability is a milestone to improve the sustainability of buildings and infrastructures. In order to ensure a prolonged service life, it is necessary to detect the deterioration of materials by means of monitoring systems aimed at evaluating not only the penetration of aggressive substances into concrete but also the corrosion of carbon-steel reinforcement. Therefore, proper data collection makes it possible to plan suitable restoration works which can be carried out with traditional or innovative techniques and materials.

New Perspectives for the Consolidation of Mural Paintings in Hypogea with an Innovative Aqueous Nanolime Dispersion, Characterized by Compatible, Sustainable, and Eco-Friendly Features.

Consolidation of mural paintings in hypogea is challenging because of their severe microclimatic conditions, characterized by high humidity levels, low air circulation, the presence of salts efflorescence, and the detrimental growth of biodeteriogen agents. Traditional consolidant products show significant drawbacks when used in hypogeum. Organic compounds, such as acrylic emulsions, are bio-receptive and some inorganic consolidants, such as silica-based products, show a lack of compatibility with the original substrate, which could lead to a reduction in permeability and an increase in the mechanical resistance of the external layer.

A Multidisciplinary Educational Approach to Anticoagulation Management for a Percutaneous Endovascular Mechanical Circulatory Support Device.

Background: Anticoagulation (AC) management of the Impella varies considerably among treatment centers. Published data regarding the management of complications including heparin-induced thrombocytopenia, bleeding and thrombosis are limited.

Objective: A multidisciplinary team was assembled to 1) identify baseline knowledge of nurses and pharmacists involved in Impella anticoagulation management; 2) develop an educational tool specific to Impella anticoagulation; 3) reassess knowledge following implementation of the tool.

Color Stability, Chemico-Physical and Optical Features of the Most Common PETG and PU Based Orthodontic Aligners for Clear Aligner Therapy.

It is difficult to find research papers collecting comparative results about characterization studies of clear aligners. Therefore, the aim of this paper is to provide the first comparative analysis of most commercial clear aligners, in terms of their stability towards intra-oral staining agents, their physicochemical and optical properties, as well as their water absorption behavior. Five types of aligners, characterized by different techniques, are considered: Erkodur, Essix Plastic, Ghost Aligner, Zendura, and Invisalign.

New Sustainable, Scalable and One-Step Synthesis of Iron Oxide Nanoparticles by Ion Exchange Process.

This work introduces an innovative, sustainable, and scalable synthesis of iron oxides nanoparticles (NPs) in aqueous suspension. The method, based on ion exchange process, consists of a one-step procedure, time and energy saving, operating in water and at room temperature, by cheap and renewable reagents. The influence of both oxidation state of the initial reagent and reaction atmosphere is considered.

Sustainable Nanotechnologies for Curative and Preventive Wood Deacidification Treatments: An Eco-Friendly and Innovative Approach.

Waterlogged wooden artifacts represent an important historical legacy of our past. They are very fragile, especially due to the severe phenomenon of acidification that may occur in the presence of acid precursors. To date, a satisfactory solution for the deacidification of ancient wood on a large scale has still not been found.

Thermoplastic Disks Used for Commercial Orthodontic Aligners: Complete Physicochemical and Mechanical Characterization.

Invisible orthodontic aligners (IOAs) have been introduced in the orthodontic field as an innovative alternative for fixed brackets, in relation to their ability to be easily inserted/removed from the oral cavity without affecting the chewing ability and the aesthetic of the patients. The paper provides a complete physicochemical and mechanical characterization of thermoplastic materials in the form of disks used for commercial IOAs. A wide palette of specific techniques is considered, from tensile tests and dynamic-mechanical analysis, to X-Ray diffraction (XRD), differential scanning calorimetry (DSC), Fourier transformation infrared spectroscopy (FTIR-ATR) analyses and water absorption tests.

Nano-Sized Fe(III) Oxide Particles Starting from an Innovative and Eco-Friendly Synthesis Method.

This paper introduces an original, eco-friendly and scalable method to synthesize ferrihydrite nanoparticles in aqueous suspensions, which can also be used as a precursor to produce α-hematite nanoparticles. The method, never used before to synthesize iron oxides, is based on an ion exchange process allowing to operate in one-step, with reduced times, at room temperature and ambient pressure, and using cheap or renewable reagents. The influence of reagent concentrations and time of the process on the ferrihydrite features is considered.

In situ syntheses of hydroxyapatite-grafted graphene oxide composites.

In this study, we examined three different syntheses of hydroxyapatite (HAp) and graphene oxide-hydroxyapatite (GO-HAp) composites with a GO content of 9, 33, and 43% wt. The materials were prepared from various precursors of calcium and phosphate ions, using an in situ synthesis method, with mild conditions to avoid reducing the GO. In situ bonding technology proposed that calcium ions bond with GO at first and then HAp nanoflakes in situ grow on GO sheets, forming GO-HAp nanocomposite.

Binders alternative to Portland cement and waste management for sustainable construction-part 1.

This review presents "a state of the art" report on sustainability in construction materials. The authors propose different solutions to make the concrete industry more environmentally friendly in order to reduce greenhouse gases emissions and consumption of non-renewable resources. Part 1-the present paper-focuses on the use of binders alternative to Portland cement, including sulfoaluminate cements, alkali-activated materials, and geopolymers.

Binders alternative to Portland cement and waste management for sustainable construction - Part 2.

The paper represents the "state of the art" on sustainability in construction materials. In Part 1 of the paper, issues related to production, microstructures, chemical nature, engineering properties, and durability of mixtures based on binders alternative to Portland cement were presented. This second part of the paper concerns the use of traditional and innovative Portland-free lime-based mortars in the conservation of cultural heritage, and the recycling and management of wastes to reduce consumption of natural resources in the production of construction materials.

Extraction of metals from spent hydrotreating catalysts: physico-mechanical pre-treatments and leaching stage.

The present paper is focused on physico-mechanical pre-treatments of spent hydrotreating catalysts aimed at concentration of at least one of the valuable metals contained in such secondary raw material. In particular, dry Ni-Mo and Co-Mo as well as wet Ni-Mo catalysts were used. Flotation, grain size separation and attrition processes were tested.

Enhanced soluble CD40 ligand and Alzheimer's disease: evidence of a possible pathogenetic role.

It has been suggested that cerebrovascular factors contribute to Alzheimer's disease. Soluble CD40 ligand (sCD40L) is directly involved in the development of vascular damage. We tested the hypothesis that sCD40L may be enhanced in Alzheimer's disease and predictive of its clinical course.

Sintered glass ceramic composites from vitrified municipal solid waste bottom ashes.

A glass ceramic composite was obtained by sinter-crystallisation of vitrified municipal solid waste bottom ashes with the addition of various percentages of alumina waste. The sintering was investigated by differential dilatometry and the crystallisation of the glass particles by differential thermal analysis. The crystalline phases produced by the thermal treatment were identified by X-ray diffraction analysis.

Study of liver function in healthy elderly subjects using the 13C-methacetin breath test.

Background: The issue of whether or not liver function is compromised in the healthy elderly population remains unsolved.

Aim: To investigate the putative age-related modifications of hepatic function using the 13C-methacetin breath test. Because endogenous CO2 production changes with age, motor activity and nutrition, a different form of processing the results was investigated.

High prevalence of HCV infection among the general population in a rural area of central Italy.

The hepatitis C virus infection (HCV) is the most frequent cause of hepatic infection in Europe. In Italy, anti-HCV positivity values are extremely variable, depending on the age and geographic location of the population being analysed. The aims of the study were: (1) evaluating positivity for anti-HCV antibodies in various age groups and determining the HBsAg in a mountainous and predominantly farming area in central Italy; (2) assessing some anamnestic and clinical variables through a questionnaire, submitted during the taking of blood samples, in order to determine HCV exposure and risk factors for the target population.

The impact of malnutrition on the quality of life in the elderly.

Malnutrition is a frequent condition, both widely represented in geriatric population and underestimated in diagnostic and therapeutic work-up, and is known to affect health status and life expectancy of elderly people. The unexpected weight loss is a pathological condition, recently classified in three different ways (sarcopenia, wasting and cachexia) according to criteria of nutritional intake, functional abilities and age-related body composition modifications, that is caused by social psychological and medical factors. In this review, the authors highlight the ways that, through malnutrition, could lead to an impairment of quality of life in elderly people.

Influence of aging and exercise-induced stress on human platelet function.

Ten healthy nonsmoking old men (age 52-70 years, OM) and ten healthy nonsmoking young men (age 20-30 years, YM) were submitted to an exercise test on a bicycle ergometer to examine the combined influence of aging and exercise-induced stress on platelet function. Data were analyzed by two-way ANOVA test to determine the statistical significance of differences between baseline, after exercise and after recovery values, and by Mann-Whitney test to compare differences between young and old groups. Our results show in OM at rest an increased platelet aggregability induced by the higher values of intraplatelet basal free calcium (143.

Long-Duration Soft X-Ray Pulses by XeCl Laser Driven Plasmas and Applications.

We report the characterization of a soft x-ray plasma source generated by a long-pulse XeCl excimer laser system. The output energy is 4 J at a wavelength of 308 nm in a 100-ns pulse. The intensity of radiation on target is estimated to be 4 × 1012 W cm-2.