A Concise Review of Recent Advancements in Carbon Nanotubes for Aerospace Applications.

Carbon nanotubes (CNTs) have attracted significant attention in the scientific community and in the industrial environment due to their unique structure and remarkable properties, including mechanical strength, thermal stability, electrical conductivity, and chemical inertness. Despite their potential, large-scale applications have been limited by challenges such as high production costs and catalyst contamination. In aerospace applications, CNTs have demonstrated considerable promise either in the form of thin layers or as reinforcements in polymer and metal matrices, where they enhance mechanical, thermal, and electromagnetic performance in lightweight composites.

Performance Restoration of Chemically Recycled Carbon Fibres Through Surface Modification with Sizing.

The recycling of Carbon Fibre-Reinforced Polymers (CFRPs) is becoming increasingly crucial due to the growing demand for sustainability in high-performance industries such as automotive and aerospace. This study investigates the impact of two chemical recycling techniques, chemically assisted solvolysis and plasma-enhanced solvolysis, on the morphology and properties of carbon fibres (CFs) recovered from end-of-life automotive parts. In addition, the effects of fibre sizing are explored to enhance the performance of the recycled carbon fibres (rCFs).

Investigating the Significances of Thiol Functionalities in SARS-CoV-2 Using Carbon Dots for Viral Inhibition.

While the World Health Organization has declared the end of the SARS-CoV-2 public health emergency, studies related to corona viruses are still under course. As of 2024, the severity of COVID-19 has diminished with current treatments and vaccinations. However, individuals can still face severe complications, highlighting the importance of ongoing research into innovative treatments for current and future coronavirus-related diseases.

Interface properties of nanostructured carbon-coated biological implants: an overview.

The interfaces between medical implants and living tissues are of great complexity because of the simultaneous occurrence of a wide variety of phenomena. The engineering of implant surfaces represents a crucial challenge in material science, but the further improvement of implant properties remains a critical task. It can be achieved through several processes.

Carbon dots as dual inhibitors of tau and amyloid-beta aggregation for the treatment of Alzheimer's disease.

Alzheimer's disease (AD) is the most common form of senile dementia, presenting a significant challenge for the development of effective treatments. AD is characterized by extracellular amyloid plaques and intraneuronal neurofibrillary tangles. Therefore, targeting both hallmarks through inhibition of amyloid beta (Aβ) and tau aggregation presents a promising approach for drug development.

Gene Transfection Efficiency Improvement with Lipid Conjugated Cationic Carbon Dots.

An ideal vehicle with a high transfection efficiency is crucial for gene delivery. In this study, a type of cationic carbon dot (CCD) known as APCDs were first prepared with arginine (Arg) and pentaethylenehexamine (PEHA) as precursors and conjugated with oleic acid (OA) for gene delivery. By tuning the mass ratio of APCDs to OA, APCDs-OA conjugates, namely, APCDs-0.

A Comprehensive Review of Electromagnetic Interference Shielding Composite Materials.

The interaction between matter and microwaves assumes critical significance due to the ubiquity of wireless communication technology. The selective shielding of microwaves represents the only way to achieve the control on crucial technological sectors. The implementation of microwave shielding ensures the proper functioning of electronic devices.

A Short Overview on Graphene and Graphene-Related Materials for Electrochemical Gas Sensing.

The development of new and high-performing electrode materials for sensing applications is one of the most intriguing and challenging research fields. There are several ways to approach this matter, but the use of nanostructured surfaces is among the most promising and highest performing. Graphene and graphene-related materials have contributed to spreading nanoscience across several fields in which the combination of morphological and electronic properties exploit their outstanding electrochemical properties.

Small Warriors of Nature: Novel Red Emissive Chlorophyllin Carbon Dots Harnessing Fenton-Fueled Ferroptosis for In Vitro and In Vivo Cancer Treatment.

The appeal of carbon dots (CDs) has grown recently, due to their established biocompatibility, adjustable photoluminescence properties, and excellent water solubility. For the first time in the literature, copper chlorophyllin-based carbon dots (Chl-D CDs) are successfully synthesized. Chl-D CDs exhibit unique spectroscopic traits and are found to induce a Fenton-like reaction, augmenting photodynamic therapy (PDT) efficacies via ferroptotic and apoptotic pathways.

The art of simplicity: Water-soluble porphyrin-like carbon dots self-assemble into mesmerizing red glow.

In this new study, we present an intriguing development in the field of theranostics: the simplistic self-assembly of red-emissive amphiphilic porphyrin-like carbon dots (P-CDs). By harnessing their exceptional photophysical properties, we have revealed a strong candidate as the ideal photosensitizer (PS) for applications, particularly in the realm of imaging. Spanning a remarkable size average between 1-4 nm, these particles exhibit both highly stable and unparalleled emission characteristics between 650 and 715 nm in water in comparison to current carbon dots (CDs) available.

Advancing glioblastoma imaging: Exploring the potential of organic fluorophore-based red emissive carbon dots.

Over time, the interest in developing stable photosensitizers (PS) which both absorb and emit light in the red region (650 and 950 nm) has gained noticeable interest. Recently, carbon dots (CDs) have become the material of focus to act as a PS due to their high extinction coefficient, low cytotoxicity, and both high photo and thermal stability. In this work, a Federal and Drug Association (FDA) approved Near Infra-Red (NIR) organic fluorophore used for photo-imaging, indocyanine green (ICG), has been explored as a precursor to develop water-soluble red emissive CDs which possess red emission at 697 nm.

An Overview on Carbon Quantum Dots Optical and Chemical Features.

Carbon quantum dots are the materials of a new era with astonishing properties such as high photoluminescence, chemical tuneability and high biocompatibility. Since their discovery, carbon quantum dots have been described as nanometric high-fluorescent carbon nanoparticles, but this definition has become weaker year after year. Nowadays, the classification and the physical explanation of carbon quantum dots optical properties and their chemical structure remain matter of debate.

Investigation into Red Emission and Its Applications: Solvatochromic N-Doped Red Emissive Carbon Dots with Solvent Polarity Sensing and Solid-State Fluorescent Nanocomposite Thin Films.

In this work, a NIR emitting dye, -toluenesulfonate (IR-813) was explored as a model precursor to develop red emissive carbon dots (813-CD) with solvatochromic behavior with a red-shift observed with increasing solvent polarity. The 813-CDs produced had emission peaks at 610 and 698 nm, respectively, in water with blue shifts of emission as solvent polarity decreased. Subsequently, 813-CD was synthesized with increasing nitrogen content with polyethyleneimine (PEI) to elucidate the change in band gap energy.

Effect of Red Mud Addition on Electrical and Magnetic Properties of Hemp-Derived-Biochar-Containing Epoxy Composites.

Waste stream valorization is a difficult task where the economic and environmental issues must be balanced. The use of complex metal-rich waste such as red mud is challenging due to the wide variety of metal oxides present such as iron, aluminum, and titanium. The simple separation of each metal is not economically feasible, so alternative routes must be implemented.

Nano-carrier for gene delivery and bioimaging based on pentaetheylenehexamine modified carbon dots.

Carbon dots (CDs) have attracted much attention due to their excellent properties and applications, especially the use for gene delivery. Considering the risks and concerns involved in the use of viral vectors for gene delivery in vivo, non-viral vectors such as CDs have gradually become an ideal alternative due to their biocompatibility and low toxicity. Therefore, in this study, the potential to apply CDs as a non-viral vector for gene delivery was investigated.

Investigation of Carbon Fibres Reclamation by Pyrolysis Process for Their Reuse Potential.

During Carbon Fibre Reinforced Polymers (CFRPs) manufacturing, large quantities of scrap are being produced and usually disposed to landfill or incinerated, resulting in a high environmental impact. Furthermore, CFRP parts that have been damaged or reached their end-of-life, follow the same disposal route and because of this, not only the environment is affected, but also high added-value materials, such as carbon fibres (CFs) are lost without further valorisation. Several recycling technologies have been suggested, such as pyrolysis, to retrieve the CF reinforcement from the CFRPs.

Cancer cells inhibition by cationic carbon dots targeting the cellular nucleus.

Nucleus targeting is tremendously important in cancer therapy. Cationic carbon dots (CCDs) are potential nanoparticles which might enter cells and penetrate nuclear membranes. Although some CCDs have been investigated in nucleus targeting and applied in nuclear imaging, the CCDs derived from drugs, that are able to target the nucleus, bind with DNA and inhibit the growth of cancer cells have not been reported.

Reply to Meier, R.J. Comment on "Tagliaferro et al. Introducing the Novel Mixed Gaussian-Lorentzian Lineshape in the Analysis of the Raman Signal of Biochar. 2020, , 1748".

First of all, we thank Dr. Meier for his thorough reading and constructive remarks [..

Hydrothermal vs microwave nanoarchitechtonics of carbon dots significantly affects the structure, physicochemical properties, and anti-cancer activity against a specific neuroblastoma cell line.

Carbon dots (CDs) from glucose were synthesized using two of the most common bottom-up methods, namely, microwave assisted (MW) and hydrothermal carbonization (HT). Synthetic parameters such as reaction time, temperature, and precursor concentration were changed to study the effects of each parameter on CD size, structure, surface functionalities, charge, photoluminescence behavior, quantum yield, cytotoxicity, blood-brain barrier (BBB) crossing ability and bioimaging. A detailed analysis is performed to compare the structure and properties of the CDs synthesized in ten different conditions.

A First Assessment of Carbon Nanotubes Grown on Oil-Well Cement via Chemical Vapor Deposition.

In this study, carbon nanotubes (CNTs) were synthesized on an oil-well cement substrate using the chemical vapor deposition (CVD) method. The effect of synthesis process on cement was investigated in depth. In this regard, FE-SEM, RAMAN and X-Ray spectroscopy were used to characterize the cement before and after the synthesis process to reveal the modifications to the cementitious matrix and some unique morphological features of CNTs.

Root nitrate uptake in sugarcane (Saccharum spp.) is modulated by transcriptional and presumably posttranscriptional regulation of the NRT2.1/NRT3.1 transport system.

Nitrate uptake in sugarcane roots is regulated at the transcriptional and posttranscriptional levels based on the physiological status of the plant and is likely a determinant mechanism for discrimination against nitrate. Sugarcane (Saccharum spp.) is one of the most suitable energy crops for biofuel feedstock, but the reduced recovery of nitrogen (N) fertilizer by sugarcane roots increases the crop carbon footprint.

Surface modification of carbon nitride dots by nanoarchitectonics for better drug loading and higher cancer selectivity.

Carbon Dots (CDs) have recently attracted a considerable amount of attention thanks to their well-documented biocompatibility, tunable photoluminescence, and excellent water solubility. However, CDs need further analysis before their potential use in clinical trials. Previously, we reported a new type of carbon nitride dot (CND) that displayed selective cancer uptake traits attributed to structural resemblances between CNDs and glutamine.

Recent Advances in Biochar Polymer Composites.

"Biochar" (BC) is the solid residue recovered from the thermal cracking of biomasses in an oxygen-poor atmosphere. Recently, BC has been increasingly explored as a sustainable, inexpensive, and viable alternative to traditional carbonaceous fillers for the development of polymer-based composites. In fact, BC exhibits high thermal stability, high surface area, and electrical conductivity; moreover, its main properties can be properly tuned by controlling the conditions of the production process.