Post-synthesis surface modification of Cu/Zr metal azolate framework: A pathway to highly sensitive electrochemical biosensors for atrazine detection.

Background: Atrazine (ATZ), a pesticide that poses serious health problems, is observed in the environment, thereby prompting its periodic monitoring and control using functional biosensors. However, established methods for ATZ detection have limited applicability. Two-dimensional (2D) metal azolate frameworks (MAF) have a higher surface area per unit volume and provide easier access to active sites.

Contact-Engineered Oxide Memtransistors for Homeostasis-Based High-Linearity and Precision Neuromorphic Computing.

Homeostasis is essential in biological neural networks, optimizing information processing and experience-dependent learning by maintaining the balance of neuronal activity. However, conventional two-terminal memristors have limitations in implementing homeostatic functions due to the absence of global regulation ability. Here, three-terminal oxide memtransistor-based homeostatic synapses are demonstrated to perform highly linear synaptic weight update and enhanced accuracy in neuromorphic computing.

Biowaste-Derived Triboelectric Nanogenerators for Emerging Bioelectronics.

Triboelectric nanogenerators (TENGs) combine contact electrification and electrostatic induction effects to convert waste mechanical energy into electrical energy. As conventional devices contribute to electronic waste, TENGs based on ecofriendly and biocompatible materials have been developed for various energy applications. Owing to the abundance, accessibility, low cost, and biodegradability of biowaste (BW), recycling these materials has gained considerable attention as a green approach for fabricating TENGs.

Realization of Extremely High-Gain and Low-Power in nMOS Inverter Based on Monolayer WS Transistor Operating in Subthreshold Regime.

In this work, we report an n-type metal-oxide-semiconductor (nMOS) inverter using chemical vapor deposition (CVD)-grown monolayer WS field-effect transistors (FETs). Our large-area CVD-grown monolayer WS FETs exhibit outstanding electrical properties including a high on/off ratio, small subthreshold swing, and excellent drain-induced barrier lowering. These are achieved by n-type doping using AlO/AlO and a double-gate structure employing high- dielectric HfO.

Recent advances in biosensors based on metal-oxide semiconductors system-integrated into bioelectronics.

Metal-oxide semiconductors (MOSs) have emerged as pivotal components in technology related to biosensors and bioelectronics. Detecting biomarkers in sweat provides a glimpse into an individual's metabolism without the need for sample preparation or collection steps. The distinctive attributes of this biosensing technology position it as an appealing option for biomedical applications beyond the scope of diagnosis and healthcare monitoring.

Bioinspired nanoplatforms for human-machine interfaces: Recent progress in materials and device applications.

The panoramic characteristics of human-machine interfaces (HMIs) have prompted the needs to update the biotechnology community with the recent trends, developments, and future research direction toward next-generation bioelectronics. Bioinspired materials are promising for integrating various bioelectronic devices to realize HMIs. With the advancement of scientific biotechnology, state-of-the-art bioelectronic applications have been extensively investigated to improve the quality of life by developing and integrating bioinspired nanoplatforms in HMIs.

Real-Time Human Activity Recognition with IMU and Encoder Sensors in Wearable Exoskeleton Robot via Deep Learning Networks.

Wearable exoskeleton robots have become a promising technology for supporting human motions in multiple tasks. Activity recognition in real-time provides useful information to enhance the robot's control assistance for daily tasks. This work implements a real-time activity recognition system based on the activity signals of an inertial measurement unit (IMU) and a pair of rotary encoders integrated into the exoskeleton robot.

Enhanced Triboelectric Effects of Self-Poled MoS-Embedded PVDF Hybrid Nanocomposite Films for Bar-Printed Wearable Triboelectric Nanogenerators.

Self-poled molybdenum disulfide embedded polyvinylidene fluoride (MoS@PVDF) hybrid nanocomposite films fabricated by a bar-printing process are demonstrated to improve the output performances of triboelectric nanogenerators (TENGs). Comparative analyses of MoS@PVDF films with different MoS concentrations and the synergic effect based on postannealing at different temperatures were examined to increase the triboelectric open-circuit voltage and the short-circuit current (∼200 V and ∼11.8 μA, respectively).

Wearable Pressure/Touch Sensors Based on Hybrid Dielectric Composites of Zinc Oxide Nanowires/Poly(dimethylsiloxane) and Flexible Electrodes of Immobilized Carbon Nanotube Random Networks.

Capacitive-type physical sensors based on hybrid dielectric composites of zinc oxide nanowires/poly(dimethylsiloxane) (ZnO NWs@PDMS) and flexible electrodes of immobilized carbon nanotube (CNT) random networks, which are highly sensitive to pressure and touch stimuli, are demonstrated. Immobilized CNT random networks densely entangled in a Nafion matrix improve the electrical stability of wearable pressure sensors against mechanical stress with a bending radius of 5 mm. The effect of ZnO NW incorporation into PDMS on the sensing performance of pressure sensors is investigated, which results in a significantly enhanced sensitivity of 8.

Functionalization of Zinc Oxide Nanoflowers with Palladium Nanoparticles via Microwave Absorption for Room Temperature-Operating Hydrogen Gas Sensors in the ppb Level.

Microwave-assisted functionalization of zinc oxide nanoflowers (ZnO NFs) with palladium nanoparticles (Pd NPs) is demonstrated to realize high-performance chemiresistive-type hydrogen (H) gas sensors operating at room temperature (RT). The developed gas sensors exhibit a high response of up to 70% at 50 ppm and a theoretical detection limit of 10 ppb. The formation of ZnO NFs with an enhanced specific surface area and their functionalization with Pd NPs are investigated through various characterizations.

Self-reconfigurable high-weight-per-volume-gelatin films for all-solution-processed on-skin electronics with ultra-conformal contact.

Although conventional skin-attachable electronics exhibit good functionalities, their direct attachment (without any adhesive) to human skin with sufficient conformal contact is challenging. Herein, all-solution-processed on-skin electronics based on self-reconfigurable high-weight-per- volume-gelatin (HWVG) film constructed using an effective, biocompatible water absorption-evaporation technique are demonstrated. Completely conformal contact of self-reconfigurable HWVG films is realized by rapidly inducing anisotropic swelling in the perpendicular direction and covering any curvature on the skin without spatial gap or void after shrinking.

Intramuscular Nerves of the Inferior Rectus Muscle: Distribution and Characteristics.

Purpose: Knowledge of the distribution of intramuscular nerves of the extraocular muscles is crucial for understanding their function. The purpose of this study was to elucidate the intramuscular distribution of the oculomotor nerve within the inferior rectus muscle (IRM) using Sihler's staining.

Method: Ninety-three IRM from 50 formalin-embalmed cadavers were investigated.

Use of the orbito-occipital line as an alternative to the Frankfort line.

Frankfort horizontal line, the line passing through the orbitale and porion, is one of the most widely used intracranial landmarks in cephalometric analysis. This study investigated the use of the orbito-occipital line extending from the orbitale to the external occipital protuberance as a novel horizontal line of the skull for substituting the Frankfort horizontal line. We evaluated the reproducibility of the new landmark and measured the angle between the orbito-occipital line and the Frankfort line.

Location of the split line of the deep temporal fascia when reducing a zygomatic arch fracture.

Background: The deep temporal fascia (DTF) is known to separate into two layers that descend to attach to the zygomatic arch. When surgeons reduce an isolated fracture of the zygomatic arch through a temporal approach, the temporal incision site needs to be superior to the split line of the DTF.

Materials And Methods: Sixty-seven hemifacial cadavers were investigated after removing the skin, subcutaneous tissue, and superficial temporal fascia.

Carbon nanotubes: An effective platform for biomedical electronics.

Cylindrical fullerenes (or carbon nanotubes (CNTs)) have been extensively investigated as potential sensor platforms due to effective and practical manipulation of their physical and chemical properties by functionalization/doping with chemical groups suitable for novel nanocarrier systems. CNTs play a significant role in biomedical applications due to rapid development of synthetic methods, structural integration, surface area-controlled heteroatom doping, and electrical conductivity. This review article comprehensively summarized recent trends in biomedical science and technologies utilizing a promising nanomaterial of CNTs in disease diagnosis and therapeutics, based on their biocompatibility and significance in drug delivery, implants, and bio imaging.

Topography of the Central Retinal Artery Relevant to Retrobulbar Reperfusion in Filler Complications.

Background: Vision loss caused by retrograde occlusion of the central retinal artery is a serious complication of cosmetic filler injections. Salvage methods that involve applying hyaluronidases in the retrobulbar space to degrade filler materials have been proposed recently for rescuing the retinal circulation in an ophthalmic emergency.

Methods: Sixty-six eyeballs and orbital contents were extracted from formalin-embalmed cadavers and dissected carefully to examine the topographic relationship of the central retinal artery and optic nerve.

Position and size of the sphenoid door jamb in the lateral orbital wall for the orbital decompression.

The aim of this study was to identify the three-dimensional topography of the sphenoid door jamb (SDJ) in the lateral orbital wall and to propose navigational guidelines for safe deep lateral decompression using surgical landmarks. The 120 orbits and SDJs of 60 subjects were three-dimensionally reconstructed using Mimics software. The mean volumes of the orbit and SDJ were 24.

Intramuscular Nerve Distribution of the Inferior Oblique Muscle.

: The intramuscular nerve distribution in the extraocular muscles is important for understanding their function. This study aimed to determine the intramuscular nerve distribution of the oculomotor nerve within the inferior oblique muscle (IO) using Sihler's staining.: Seventy-two IOs from 50 formalin-embalmed cadavers were investigated.

Wearable 1 V operating thin-film transistors with solution-processed metal-oxide semiconductor and dielectric films fabricated by deep ultra-violet photo annealing at low temperature.

Amorphous metal-oxide semiconductors (AOSs) such as indium-gallium-zinc-oxide (IGZO) as an active channel have attracted substantial interests with regard to high-performance thin-film transistors (TFTs). Recently, intensive and extensive studies of flexible and/or wearable AOS-based TFTs fabricated by solution-process have been reported for emerging approaches based on device configuration and fabrication process. However, several challenges pertaining to practical and effective solution-process technologies remain to be resolved before low-power consuming AOS-based TFTs for wearable electronics can be realized.

The Effect of Crystalline Aluminum Oxide on Device Performance of Solution-Processed Indium-Gallium-Zinc-Oxide Thin-Film Transistors Operating at Low Voltage.

High dielectric constant (high-) materials have been extensively investigated for low-voltage operating electronics. In recent years, solution-processed high- dielectrics have been of technological interests in low fabrication cost, large area process and good film quality, compared to the vacuum-process technology. In this paper, we demonstrate solution-processed aluminum oxide (Al2O3) dielectrics for high performance solution-processed indium-gallium-zinc-oxide (IGZO) thin-film transistors (TFTs) operating at low voltage.

External and Internal Diameters of the Facial Artery Relevant to Intravascular Filler Injection.

Background: Vision loss and skin necrosis caused by an accidental intraarterial embolism or vascular compression are rare but devastating complications when injecting filler materials into the face.

Methods: The external and internal diameters and wall thicknesses of the facial artery and its branches were measured from 41 formalin-embalmed cadavers after removing connective tissues attached to the arterial wall.

Results: The diameter and thickness of the facial artery exhibited significant interregional differences.

Intramuscular Nerve Distribution in the Medial Rectus Muscle and Its Clinical Implications.

Purpose: The intramuscular nerve distribution in the extraocular muscles may be crucial for understanding their physiological and pathological responses. This study aimed to determine the oculomotor nerve distribution in the medial rectus muscle (MR) using Sihler's staining.

Method: Thirty-seven MRs from 23 cadavers were investigated.

High-performance gas sensors based on single-wall carbon nanotube random networks for the detection of nitric oxide down to the ppb-level.

We demonstrate highly sensitive and selective gas sensors based on solution-processed single-wall carbon nanotube (SWCNT) random networks for the detection of nitric oxide (NO) down to the ppb-level operating at room temperature. The proposed gas sensors exhibited a response of 50% under both inert and air atmospheres with a theoretical detection limit of 0.2 ppb and a selectivity toward different target gases of volatile organic compounds, including benzene, toluene, and ammonia.

Low-Voltage Operating Single-Wall Carbon Nanotube Thin-Film Transistors Using High Work Function Contacts on Flexible Substrates.

There have been constant attempts as regards high-performance thin-film transistors (TFTs) by improving the charge injection between the source/drain electrode (S/D) and the channel. In this paper, we investigate the effect of the electric contact on the device performance of single-wall carbon nanotube (SWCNT) TFTs employing the suitable work function material. In order to realize the electric contacts for the dominant hole injection between the S/D and the SWCNT active channel, a high work function material of molybdenum trioxide (MoO) fabricated by an optimized process are utilized.

Improved Device Performance of Solution-Processed Single-Wall Carbon Nanotube Transistors by a Patterning Technique Using a Selective Surface Treatment.

During the fabrication processes for single-wall carbon nanotube thin-film transistors (SWCNT-TFTs), the impurities of organic residues such as photoresist and developer can be induced, which affects the charge transport. As a result, solution-processed SWCNT-TFTs exhibit poor and non-uniform device performance regardless of the intrinsic electrical characteristics. Here, we demonstrate a patterning technique using a selective surface treatment with solution-processed hydrophobic fluorocarbon copolymer in SWCNT-TFTs.