Nonlinear imaging and vibrational spectroscopic analysis of cellulosic fibres treated with COEX® flame-retardant for tapestry preservation.

Cellulose-based fabrics are widely used in the preservation and storage of historic tapestries. Their ease of flammability is a serious concern that greatly limits their applications and requires the development of effective and safe flame-retardant treatments. In this work, we analysed linen and cotton textile samples before and after COEX® treatment, a patented green technology imparting anti-flame properties by functionalizing the cellulose molecules with phosphorus and sulphur groups.

Flavin Derivatives with Tailored Redox Properties: Synthesis, Characterization, and Electrochemical Behavior.

This study establishes structure-property relationships for four synthetic flavin molecules as bioinspired redox mediators in electro- and photocatalysis applications. The studied flavin compounds were disubstituted with polar substituents at the N1 and N3 positions (alloxazine) or at the N3 and N10 positions (isoalloxazines). The electrochemical behavior of one such synthetic flavin analogue was examined in detail in aqueous solutions of varying pH in the range from 1 to 10.

Tailoring copper oxide semiconductor nanorod arrays for photoelectrochemical reduction of carbon dioxide to methanol.

Solar photoelectrochemical reduction of carbon dioxide to methanol in aqueous media was driven on hybrid CuO/Cu2O semiconductor nanorod arrays for the first time. A two-step synthesis was designed and demonstrated for the preparation of these hybrid copper oxide one-dimensional nanostructures on copper substrates. The first step consisted in the growth of CuO nanorods by thermal oxidation of a copper foil at 400 °C.

Long-lived, directional photoinduced charge separation in RuII complexes bearing laminate polypyridyl ligands.

RuII complexes incorporating both amide-linked bithiophene donor ancillary ligands and laminate acceptor ligands; dipyrido[3,2-a:2',3'-c]phenazine (dppz), tetrapyrido[3,2-a:2',3'-c:3'',2''-h:2''',3'''-j]phenazine (tpphz), and 9,11,20,22-tetraazatetrapyrido[3,2-a:2',3'-c:3'',2''-l:2''',3''']-pentacene (tatpp) exhibit long-lived charge separated (CS) states, which have been analyzed using time-resolved transient absorption (TA), fluorescence, and electronic absorption spectroscopy in addition to ground state electrochemical and spectroelectrochemical measurements. These complexes possess two electronically relevant ³MLCT states related to electron occupation of MOs localized predominantly on the proximal "bpy-like" portion and central (or distal) "phenazine-like" portion of the acceptor ligand as well as energetically similar ³LC and ³ILCT states. The unusually long excited state lifetimes (τ up to 7 μs) observed in these complexes reflect an equilibration of the ³MLCTprox or ³MLCTdist states with additional triplet states, including a ³LC state and a ³ILCT state that formally localizes a hole on the bithiophene moiety and an electron on the laminate acceptor ligand.

Efficient solar photoelectrosynthesis of methanol from carbon dioxide using hybrid CuO-Cu2O semiconductor nanorod arrays.

Solar photoelectrosynthesis of methanol was driven on hybrid CuO-Cu(2)O semiconductor nanorod arrays for the first time at potentials ~800 mV below the thermodynamic threshold value and at Faradaic efficiencies up to ~95%. The CuO-Cu(2)O nanorod arrays were prepared on Cu substrates by a two-step approach consisting of the initial thermal growth of CuO nanorods followed by controlled electrodeposition of p-type Cu(2)O crystallites on their walls. No homogeneous co-catalysts (such as pyridine, imidazole or metal cyclam complexes) were used contrasting with earlier studies on this topic using p-type semiconductor photocathodes.

Photocatalytic generation of syngas using combustion-synthesized silver bismuth tungstate.

Silver bismuth tungstate (AgBiW(2)O(8)) nanoparticles were prepared for the first time by solution combustion synthesis by using the corresponding metal nitrates as the precursor and urea as the fuel. These nanoparticles were subsequently modified with Pt catalyst islands using a photocatalytic procedure and used for the photogeneration of syngas (CO+H(2)). Formic acid was used for this purpose for the in situ generation of CO(2) and its subsequent reduction to CO.

Ligand-triplet-fueled long-lived charge separation in ruthenium(II) complexes with bithienyl-functionalized ligands.

Ruthenium(II) polypyridyl complexes with pendant bithienyl ligands exhibiting unusually long-lived (τ ~ 3-7 μs) charge-separated excited states and a large amount of stored energy (ΔG° ~ 2.0 eV) are reported. A long-lived ligand-localized triplet acts as an energy reservoir to fuel population of an interligand charge-transfer state via an intermediate metal-to-ligand charge-transfer state in these complexes.

Photochemical two-electron reduction of a dinuclear ruthenium complex containing a bent tetraazatetrapyridopentacene bridging ligand: pushing up the LUMO for storing more energy.

The synthesis and characterization of a ditopic bridging ligand, 9,12,21,22-tetraazatetrapyrido[3,2-a:2',3'-c:3″2″-m:2''',3'''-o]pentaphene (tatppα) and its dinuclear ruthenium complex, [(phen)(2)Ru(tatppα)Ru(phen)(2)][PF(6)](4) (1(4+)), are described. The tatppα ligand is structurally very similar to 9,10,20,33-tetraazatetrapyrido[3,2-a:2',3'-c:3″,2″-l:2''',3'''-n]pentacene (tatppβ), except that, instead of a linear tetraazapentacene backbone, tatppα has an ortho (or α) substitution pattern about the central benzene ring, leading to a 120° bend. Complex 1(4+) shows tatppα-based reductions at -0.

Photoinduced ligand transformations in a ruthenium complex of dimethoxytetrapyridotetraazapentacene.

The dinuclear ruthenium(II) complex [(phen)(2)Ru(tatpOMe)Ru(phen)(2)](4+) (2(4+); phen is 1,10-phenanthroline and tatpOMe is 10,21-dimethoxy-9,10,20,33-tetraazatetrapyrido[3,2-a:2'3'-c:3'',2''-l:2''',3'''-n]pentacene) has been synthesized and characterized by (1)H NMR, ESI mass spectroscopy and elemental analysis. Loss of methoxy group from bridging ligand of complex 2(4+) due to irradiation is observed by (1)H NMR and photochemistry. The interrelated electronic properties UV-Vis, electrochemistry, photochemistry and molecular orbital calculation are analyzed and discussed on the bridging ligand of the complex 2(4+).

Electrochemical grafting of poly(3,4-ethylenedioxythiophene) into a titanium dioxide nanotube host network.

This study focuses on electrodeposition for infiltrating in situ a conducting polymer such as poly(3,4-ethylenedioxythiophene) (PEDOT) into a host titanium dioxide (TiO(2)) nanotube array (NTA) framework. The TiO(2) NTA was electrosynthesized on titanium foil in turn by anodization in a fluoride-containing medium. The PEDOT layer was electrografted into the TiO(2) NTA framework using a two-step potentiostatic growth protocol in acetonitrile containing supporting electrolyte.

Synthesis of trithienylenevinylenes bearing dithiocarbonate groups and their dithiophene-tetrathiafulvalene derivatives.

A series of conjugated trithienylenevinylene compounds bearing dithiocarbonate groups were prepared by Wittig reactions. Dithiophene-tetrathiafulvalene (DT-TTF) derivatives can be readily prepared through trialkylphosphite-mediated coupling reactions of these trithienylenevinylene materials. All compounds were characterized by NMR, FT-IR, UV-vis, and mass spectroscopy.

Solution combustion synthesis of oxide semiconductors for solar energy conversion and environmental remediation.

In this tutorial review, we summarize recent research on the solution combustion synthesis of oxide semiconductors for applications related to photovoltaic solar energy conversion, photoelectrochemical hydrogen generation, and heterogeneous photocatalytic remediation of environmental pollutants. First, the advantages of combustion synthesis relative to other strategies for preparing oxide semiconductors are discussed followed by a summary of process variants in combustion synthesis. The possibility of in situ chemical modification of the oxide during its formation in the combustion environment is addressed.

Electroreduction of the ruthenium complex [(bpy)2Ru(tatpp)]Cl2 in water: insights on the mechanism of multielectron reduction and protonation of the Tatpp acceptor ligand as a function of pH.

The mononuclear ruthenium complex [(bpy) 2Ru(tatpp)] (2+) ( 1 (2+); bpy is 2,2'-bipyridine and tatpp is 9,11,20,22-tetra-aza-tetrapyrido[3,2-a:2'3'-c:3'',2''-l:2''',3''']-pentacene) undergoes up to four reversible tatpp ligand-based reductions as determined by electrochemistry in aqueous solution. Specific redox and protonation states of this complex were generated by stoichiometric chemical reduction with cobaltocene and protonation with trifluoroacetic acid in acetonitrile. These species exhibit unique UV-visible absorption spectra, which are used to determine the speciation in aqueous media as a function of the potential during the electrochemical reduction.

Combustion synthesis and characterization of nanocrystalline WO3.

The energy payback time associated with the semiconductor active material is an important parameter in a photovoltaic solar cell device. Thus lowering the energy requirements for the semiconductor synthesis step or making it more energy-efficient is critical toward making the overall device economics more competitive relative to other nonpolluting energy options. In this communication, combustion synthesis is demonstrated to be a versatile and energy-efficient method for preparing inorganic oxide semiconductors such as tungsten trioxide (WO3) for photovoltaic or photocatalytic solar energy conversion.

The role of monomers and dimers in the reduction of ruthenium(II) complexes of redox-active tetraazatetrapyridopentacene ligand.

A combination of electrochemistry, spectroelectrochemistry, and 1H NMR has been used to study the reduction and solution speciation in acetonitrile of two mononuclear Ru complexes containing the redox-active 9,11,20,22-tetraazatetrapyrido [3,2-a:2',3'-c:3' ',2' '-l:2' '',3' ''-n]pentacene (tatpp) ligand. These complexes, [(bpy)2Ru(tatpp)][PF6]2 (1[PF6]2), and [(phen)2Ru(tatpp)][PF6]2 (2[PF6]2) (where bpy is 2,2'-bipyridine and phen is 1,10-phenanthroline), form pi-pi stacked dimers (e.g.

Formation and characterization of self-organized TiO2 nanotube arrays by pulse anodization.

This paper describes TiO2 nanotube arrays prepared by anodic oxidation of Ti substrates using pulse voltage waveforms. Voltages were pulsed between 20 and -4 V or between 20 and 0 V with varying durations from 2 to 16 s at the lower limit of the pulse waveform. Ammonium fluoride or sodium fluoride (and mixtures of both) was used as the electrolyte with or without added medium modifier (glycerol, ethylene glycol, or poly (ethylene glycol) (PEG 400)) in these experiments.

Effect of vacuum annealing on the surface chemistry of electrodeposited copper(I) oxide layers as probed by positron annihilation induced auger electron spectroscopy.

Vacuum anneal induced changes in the surface layers of electrodeposited copper(I) oxide (Cu2O) were probed by time-of-flight positron annihilation induced Auger electron spectroscopy (TOF-PAES) and by electron induced Auger electron spectroscopy (EAES). Large changes in the intensity of the Cu PAES intensity resulting from isochronal in situ vacuum anneals made at increasing temperatures indicated that, before thermal treatment, the surface was completely covered by a carbonaceous overlayer and that this layer was removed, starting at a temperature between 100 and 200 degrees C, to expose an increasing amount of Cu in the top layer as the anneal temperature was increased. The thickness of this overlayer was estimated to be approximately 4 A based on analysis of the EAES data, and its variation with the thermal anneal temperature was mapped.

Nanoporous TiO2 and WO3 films by anodization of titanium and tungsten substrates: influence of process variables on morphology and photoelectrochemical response.

The photoelectrochemical response of nanoporous films, obtained by anodization of Ti and W substrates in a variety of corrosive media and at preselected voltages in the range from 10 to 60 V, was studied. The as-deposited films were subjected to thermal anneal and characterized by scanning electron microscopy and X-ray diffraction. Along with the anodization media developed by previous authors, the effect of poly(ethylene glycol) (PEG 400) or D-mannitol as a modifier to the NH4F electrolyte and glycerol addition to the oxalic acid electrolyte was studied for TiO2 and WO3, respectively.

Selenium-modified titanium dioxide photochemical diode/electrolyte junctions: photocatalytic and electrochemical preparation, characterization, and model simulations.

The photoelectrochemical behavior of TiO2 thin film electrodes, photocatalytically modified with Se islands, is described. The TiO2 thin films were electrodeposited on transparent conducting oxide glass substrates. The resultant electrode forms a n-TiO2/p-Se "photochemical diode" which, in turn, contacts an electrolyte phase.

Driving multi-electron reactions with photons: dinuclear ruthenium complexes capable of stepwise and concerted multi-electron reduction.

Using biological precedents, it is expected that concerted, multi-electron reduction processes will play a significant role in the development of efficient artificial photosynthetic systems. We have found that the dinuclear ruthenium complexes [(phen)(2)Ru(tatpp)Ru(phen)(2)](4+) (P) and [(phen)(2)Ru(tatpq) Ru(phen)(2)](4+) (Q) undergo photodriven 2- and 4-electron reductions, respectively, in the presence of a sacrificial reductant. Importantly, these processes are completely reversible upon exposure to air, and consequently, these complexes have the potential to be used catalytically in multi-electron transfer reactions.

Influence of pH on the photochemical and electrochemical reduction of the dinuclear ruthenium complex, [(phen)2Ru(tatpp)Ru(phen)2)Cl4, in water: proton-coupled sequential and concerted multi-electron reduction.

The dinuclear ruthenium complex [(phen)2Ru(tatpp)Ru(phen)2]4+ (P; in which phen is 1,10-phenanthroline and tatpp is 9,11,20,22-tetraaza tetrapyrido[3,2-a:2'3'-c:3'',2''-l:2''',3''']-pentacene) undergoes a photodriven two-electron reduction in aqueous solution, thus storing light energy as chemical potential within its structure. The mechanism of this reduction is strongly influenced by the pH, in that basic conditions favor a sequential process involving two one-electron reductions and neutral or slightly acidic conditions favor a proton-coupled, bielectronic process. In this complex, the central tatpp ligand is the site of electron storage and protonation of the central aza nitrogen atoms in the reduced products is observed as a function of the solution pH.

Multielectron photoreduction of a bridged ruthenium dimer, [(phen)2Ru(tatpp)Ru(phen)2][PF6]4: aqueous reactivity and chemical and spectroelectrochemical identification of the photoproducts.

The dinuclear ruthenium(II) complex [(phen)(2)Ru(tatpp)Ru(phen)(2)][PF(6)](4) (P) (where phen is 1,10-phenanthroline and tatpp is 9,11,20,22-tetraazatetrapyrido[3,2-a:2'3'-c:3' ',2' '-l:2' ",3' "]pentacene) is shown to accept up to four electrons and two protons on the central tatpp bridging ligand via a combination of stoichiometric chemical reductions and protonations and spectroelectrochemistry (SEC) in acetonitrile. The absorption spectra of seven distinct species related by reduction and/or protonation of the central tatpp ligand were obtained and the two sequential photoproducts obtained from visible irradiation of P in acetonitrile (with 0.25 M triethylamine (TEA)) thus identified as P(-) (singly reduced, nonprotonated P) and HP(-) (doubly reduced, monoprotonated P), respectively.