Clinical characteristics, management, and malignancy rate of oral lichen planus: A European multicenter study.

Introduction: Oral lichen planus (OLP) is a chronic inflammatory mucocutaneous condition that includes a spectrum of oral clinical manifestations ranging from mild painless white lesions to painful erosions and ulcers. The purpose of this European multicenter study is to describe the general characteristics of OLP lesions, the clinical and histopathological diagnosis, and the management of OLP at different European Oral Medicine and Maxillofacial Surgery centers, in order to minimize selections biases and provide information about the current trends in the treatment of OLP across Europe.

Materials And Methods: Data and histopathological records of patients with OLP were retrospectively revised and only those patients that fulfilled the diagnostic criteria from the 2016 position paper by American Academy of Oral and Maxillofacial Pathology were included.

Monomer elution and shrinkage stress analysis of addition-fragmentation chain-transfer-modified resin composites in relation to the curing protocol.

Objective: The purpose was to compare the effects of rapid (3 s) and conventional (20 s) polymerization protocols (PP) of mono- and multichip LED curing units (LCU) on shrinkage stress (SS) and monomer elution (ME) in bulk-fill resin-based composites (RBC) with and without addition-fragmentation chain-transfer (AFCT) monomer.

Methods: Cylindrical (5x4mm) specimens were prepared from two RBCs containing different AFCT monomers (Filtek OneBulk-FOB; Tetric PowerFill-TPF) and one without (Tetric EvoCeram Bulk-TEC). After soaking for 3, 10, and 14 days (75 % ethanol), ME was quantified using standard monomers by High-Performance Liquid Chromatography.

Evaluation of bone contact area and intercondylar distance changes in orthognathic surgery - a comparison between BSSO and HSSO technique depending on mandibular displacement extent.

Objectives: The present study aims to assess the impact of bilateral and high oblique sagittal split osteotomy (BSSO/HSSO), as well as displacement distances and directions on the expected and achievable bone contact area (BCA) and changes in the intercondylar distance (ICD). The primary question addressed is whether mandibular splitting through BSSO results in a greater BCA and/or ICD when compared to splitting through HSSO.

Materials And Methods: Totally 80 mandibular displacements were performed on 20 fresh cadavers, for each subject, four splints were produces to facilitate mandibular advancement as well as setbacks of 4 and 8 mm.

Relation between internal adaptation and degree of conversion of short-fiber reinforced resin composites applied in bulk or layered technique in deep MOD cavities.

Objective: The purpose was to evaluate the degree of conversion (DC), internal adaptation (IA) and closed porosity (CP) of short-fiber reinforced resin composites (SFRC) associated with layered or bulk restorative procedures in deep MOD cavities.

Methods: Eighty third molars with standardized MOD cavities (5-mm-depth, 2.5-mm-width) were randomly divided into four groups and restored as follows: 1) bulk SFRC; 2) layered SFRC; 3) flowable bulk-fill resin-based composites (RBC); 4) layered conventional RBC.

Does Preheating Influence the Cytotoxic Potential of Dental Resin Composites?

Resin-based dental composites (RBC) release cytotoxic components, however the extent of the elution from preheated RBCs is barely investigated. The aim was therefore to determine the cytotoxic effect of preheated conventional, bulk, and thermoviscous RBCs of clinically relevant sizes using different cell viability methods in a contact-free model. Samples (6 × 4 mm) were prepared from conventional [Estelite Sigma Quick (ESQ), Filtek Z250 (FZ)] and bulk-filled [Filtek One BulkFill Restorative (FOB), SDR Plus Bulk Flow (SDR), VisCalor Bulk (VCB)] RBCs.

Patient's perception of recovery following surgical removal of mandibular third molars. A prospective european multi-center study.

This study evaluated patient's perception of recovery following surgical removal of mandibular third molars (SRM3s) including analyze of potential risk factors associated with impaired convalescent. Patient related parameters combined with preoperative questionnaires including Modified Dental Anxiety Scale, Oral Health Impact Profile-14, and Decayed, Missing, Filled Teeth index were correlated with questionnaires assessing pain, swelling, trismus, sick leave, social and working isolation, physical appearance, eating and speaking ability, diet variations, sleep impairment, impaired sensation of the lip, chin, and tongue, one month following SRM3s. Totally, 412 patients (223 females, 189 males) with mean age of 29.

Clinical evaluation of lithium disilicate versus indirect resin composite partial posterior restorations - A 7.8-year retrospective study.

Objective: To evaluate retrospectively the longevity of lithium disilicate ceramic (LidiSi) vs. laboratory-processed resin-based composite (RBC) inlay/onlay/overlay restorations and risk factors associated with restoration deficiencies and failures.

Methods: Patients (n = 91) receiving LidiSi (73.

The effect of individual drilling sleeves on the precision of coronectomy tooth sections. An in vitro 3D-printed jaw model experiment.

Objectives: The aim of this in vitro study was to evaluate the effect of a 3D-printed drill sleeve (DS) on the precision and duration of coronectomy sections.

Materials And Methods: Thirty-six trainees and oral surgeons performed 72 coronectomy cuts in a 3D-printed, entirely symmetric mandible model. Coronectomy was performed freehand (FH) on one side and with a DS on the other side.

Pre-eruptive intracoronal resorption in orthodontic patients: A retrospective analysis of 3,143 patients.

Objectives: The aim of this retrospective study was to analyze the occurrence and characteristics of pre-eruptive intracoronal resorptions in a clinical orthodontic patient population.

Materials And Methods: Patients treated in an orthodontic department (University of Pécs, Pécs, Hungary) were included. Unerupted teeth on panoramic radiographs were analyzed for intracoronal radiolucent lesions.

Comparative Evaluation of the Repair Bond Strength of Dental Resin Composite after Sodium Bicarbonate or Aluminum Oxide Air-Abrasion.

The dental prophylactic cleaning of a damaged resin-based composite (RBC) restoration with sodium bicarbonate can change the surface characteristics and influence the repair bond strength. The purpose of this study was to compare the effect of sodium bicarbonate (SB) and aluminum oxide (AO) surface treatments on the microtensile bond strength (µTBS) of repaired, aged RBC. Bar specimens were prepared from microhybrid RBC and aged in deionized water for 8 weeks.

Automatic brain MRI motion artifact detection based on end-to-end deep learning is similarly effective as traditional machine learning trained on image quality metrics.

Head motion artifacts in magnetic resonance imaging (MRI) are an important confounding factor concerning brain research as well as clinical practice. For this reason, several machine learning-based methods have been developed for the automatic quality control of structural MRI scans. Deep learning offers a promising solution to this problem, however, given its data-hungry nature and the scarcity of expert-annotated datasets, its advantage over traditional machine learning methods in identifying motion-corrupted brain scans is yet to be determined.

How and why humans trust: A meta-analysis and elaborated model.

Trust exerts an impact on essentially all forms of social relationships. It affects individuals in deciding whether and how they will or will not interact with other people. Equally, trust also influences the stance of entire nations in their mutual dealings.

Effect of Ceramic and Dentin Thicknesses and Type of Resin-Based Luting Agents on Intrapulpal Temperature Changes during Luting of Ceramic Inlays.

The adhesive cementation of ceramic inlays may increase pulpal temperature (PT) and induce pulpal damage due to heat generated by the curing unit and the exothermic reaction of the luting agent (LA). The aim was to measure the PT rise during ceramic inlay cementation by testing different combinations of dentin and ceramic thicknesses and LAs. The PT changes were detected using a thermocouple sensor positioned in the pulp chamber of a mandibular molar.

The effect of high-irradiance rapid polymerization on degree of conversion, monomer elution, polymerization shrinkage and porosity of bulk-fill resin composites.

Objective: The purpose was to compare the degree of conversion (DC), monomer elution (ME), polymerization shrinkage (PS) and porosity of two addition-fragmentation chain transfer (AFCT) modified resin-based composites (RBC) light-cured with rapid- (RP), turbo- (TP) or conventional polymerization (CP) settings.

Methods: Cylindrical samples (6-mm wide, 4-mm thick) were prepared from Tetric PowerFill (TPF) and Filtek One Bulk (FOB). Four groups were established according to the polymerization settings: 3s-RP, 5s-TP, 10s-CP and 20s-CP.

Effect of Pre-Heating on the Monomer Elution and Porosity of Conventional and Bulk-Fill Resin-Based Dental Composites.

The pre-heating of dental resin-based composites (RBCs) improves adaptability to cavity walls, reducing microleakages. However, the rapid cooling of the pre-heated RBC may change the polymerization kinetics, and thus the final network configuration of the RBC. It is well known that unreacted monomers remaining in the set RBC can leach into the oral cavity.

Movement-related artefacts (MR-ART) dataset of matched motion-corrupted and clean structural MRI brain scans.

Magnetic Resonance Imaging (MRI) provides a unique opportunity to investigate neural changes in healthy and clinical conditions. Its large inherent susceptibility to motion, however, often confounds the measurement. Approaches assessing, correcting, or preventing motion corruption of MRI measurements are under active development, and such efforts can greatly benefit from carefully controlled datasets.

Pre-eruptive intracoronal resorption in "high-risk" impacted third molars: A report of four cases.

Pre-eruptive intracoronal resorption (PEIR) is usually an incidental finding as a radiolucent lesion within the coronal dentin of unerupted teeth. Through the four cases reported here, authors would demonstrate deeply impacted "high-risk" third molars with PEIR defects, showing an increased risk of inferior alveolar nerve (IAN) injury. However, follow-up or coronectomy may eliminate or reduce the risk of neurosensory disturbances, in case of PEIR lesions this can be contradictory due to the unpredictable reactions of the third molar's pulp.

Hemizygous nonsense variant in the moesin gene leads to a new autoimmune phenotype of Immunodeficiency 50.

Here, we present the findings of an investigation involving two male siblings with juvenile total tooth loss, early-onset chronic leg ulcers, and autoimmune thyroiditis, as well as focal segmental glomerulosclerosis with associated pulmonary emphysema in one and diabetes mellitus in the other. The clinical picture and lupus anticoagulant, cryoglobulin, and cold agglutinin positivity suggested the diagnosis of antiphospholipid syndrome. Flow cytometry analysis showed immunophenotypes consistent with immune dysregulation: a low number of naive T cells, elevated CD4 T cell counts, and decreased CD8 T-cell counts were detected, and more than half of the T-helper population was activated.

Intrapulpal temperature changes during the cementation of ceramic veneers.

Adhesive cementation of ceramic veneers may increase pulpal temperature (PT) due to the combined effect of heat generated by the curing unit and the exothermic reaction of the luting agent (LA). PT increase may induce pulpal damage. The aim was to determine the PT rise during the luting of ceramic veneers (CV) of different thicknesses with light- or dual-curing (LC, DC) adhesive cements as well as pre-heated restorative resin-based composites (PH-RBC).

Effect of Air-Polishing and Different Post-Polishing Methods on Surface Roughness of Nanofill and Microhybrid Resin Composites.

Air-abrasion is a popular prophylactic procedure to maintain oral hygiene. However, depending on the applied air-abrasive powder, it can damage the surface of the tooth and restorations, making it susceptible to plaque accumulation. The purpose of this study was to investigate the effect of 5 s and 10 s air-abrasion of calcium carbonate on surface roughness (Ra) of enamel, nanofill, and microhybrid resin-composites and the effect of post-polishing with two-step rubber- (RP) or one-step brush polisher (BP) to re-establish the surface smoothness.

Adhesive Management of Anterior Tooth Wear in Combination with the Dahl Concept-A 27-Month Observational Case Series.

Localized anterior maxillary tooth wear caused by erosion and attrition with loss of interocclusal space is difficult to manage. This observational case-series study reports six cases with worn anterior dentition treated with labial ceramic and palatal direct resin composite veneers at an increased vertical dimension of occlusion without restoration of unaffected posterior teeth. Thirty-six palatal direct veneers were made in six patients from a nanohybrid resin composite with the help of a wax-up-based template at an increased vertical dimension.

Significance of bone morphology and quality on the primary stability of orthodontic mini-implants: in vitro comparison between human bone substitute and artificial bone.

Aim: This study evaluated artificial bone models against a human bone substitute to assess the primary stability of orthodontic mini-implants (OMIs) at varying implant sites with different morphologies and qualities.

Materials And Methods: A total of 1200 OMI placements of four types were inserted into four artificial bone models of different density (D1, D2, D3, D4) and into a human bone substitute (HB). The implants varied in diameter (2.

The Effect of Extrinsic Factors on the Mechanical Behavior and Structure of Elastic Dental Ligatures and Chains.

Force provided by elastomers used in orthodontics can be affected by several factors present in the oral cavity. The aim of our study was to investigate the role of mouthwashes, toothbrushing, and smoking in the force decay of such elastomers. Tensile strength, changes in the force continuously exerted, and force decay of elastic chains (Ortho Organizer and Masel Short Power Chain) and elastic ligatures (Dentaurum and Masel) by two separate manufacturers were measured.

Division 21 has been devoted to human-centered design since the 1950s: Comment on Lyon, Brewer, and Areán (2020).

In the article, "Leveraging Human-Centered Design to Implement Modern Psychological Science," Lyon et al. (2020) presented a case for human-centered design without noting that this has been the focus of Division 21, Applied Experimental and Engineering Psychology, since its founding in 1957. Once acquainted with the work and expertise of Division 21 members, APA members will find the division is devoted to applications of psychological science in all areas of human-centered design and, with its collaborative and interdisciplinary focus, a force to reduce siloing in psychology.