Rationalizing Graphene-ZnO Composites for Gas Sensing via Functionalization with Amines.

The rational design of composites based on graphene/metal oxides is one of the pillars for advancing their application in various practical fields, particularly gas sensing. In this study, a uniform distribution of ZnO nanoparticles (NPs) through the graphene layer was achieved, taking advantage of amine functionalization. The beneficial effect of amine groups on the arrangement of ZnO NPs and the efficiency of their immobilization was revealed by core-level spectroscopy, pointing out strong ionic bonding between the aminated graphene (AmG) and ZnO.

Alcohol Vapor Sensor Based on Quasi-2D NbO Derived from Oxidized NbCT MXenes.

MXenes are two-dimensional (2D) materials with a great potential for sensor applications due to their high aspect ratio and fully functionalized surface that can be tuned for specific gas adsorption. Here, we demonstrate that the NbCT-based sensor exhibits high performance towards alcohol vapors at temperatures up to 300-350 °C, with the best sensitivity towards ethanol. We attribute the observed remarkable chemiresistive effect of this material to the formation of quasi-2D NbO sheets as the result of the oxidation of Nb-based MXenes.

Effects of Plasma Treatment on the Surface and Photocatalytic Properties of Nanostructured SnO-SiO Films.

In this work, we study the effects of treating nanostructured SnO-SiO films derived by a sol-gel method with nitrogen and oxygen plasma. The structural and chemical properties of the films are closely investigated. To quantify surface site activity in the films following treatment, we employed a photocatalytic UV degradation test with brilliant green.

Tuning humidity sensing properties grafting fluorine and nitrogen-containing species on single-walled carbon nanotubes.

The effect of humidity on the electrical conductivity of single-walled carbon nanotube (SWCNT) films depends on both the conductivity of individual nanotubes and the electrical contacts between them. Here, we study these factors by comparing the sensor response of nanotubes with fluorine- and nitrogen-containing groups attached to the sidewalls. Experiments carried out in a wide range of relative humidity (RH) at room and elevated temperatures showed that the conductivity of non-functionalized SWCNTs and contacts between them decreases upon the adsorption of water molecules.

Adaptive Peptide Molecule as the Promising Highly-Efficient Gas-Sensor Material: In Silico Study.

Gas sensors are currently employed in various applications in fields such as medicine, ecology, and food processing, and serve as monitoring tools for the protection of human health, safety, and quality of life. Herein, we discuss a promising direction in the research and development of gas sensors based on peptides-biomolecules with high selectivity and sensitivity to various gases. Thanks to the technique developed in this work, which uses a framework based on the density-functional tight-binding theory (DFTB), the most probable adsorption centers were identified and used to describe the interaction of some analyte molecules with peptides.

Nanocomposite CoO-ZnO Thin Films for Photoconductivity Sensors.

Thin nanocomposite films based on zinc oxide (ZnO) added with cobalt oxide (CoO) were synthesized by solid-phase pyrolysis. According to XRD, the films consist of a ZnO wurtzite phase and a cubic structure of CoO spinel. The crystallite sizes in the films increased from 18 nm to 24 nm with growing annealing temperature and CoO concentration.

Toward On-Chip Multisensor Arrays for Selective Methanol and Ethanol Detection at Room Temperature: Capitalizing the Graphene Carbonylation.

The artificial olfaction units (or e-noses) capable of room-temperature operation are highly demanded to meet the requests of society in numerous vital applications and developing Internet-of-Things. Derivatized 2D crystals are considered as sensing elements of choice in this regard, unlocking the potential of the advanced e-nose technologies limited by the current semiconductor technologies. Herein, we consider fabrication and gas-sensing properties of On-chip multisensor arrays based on a hole-matrixed carbonylated (C-ny) graphene film with a gradually changed thickness and concentration of ketone groups of up to 12.

Paper-Based Humidity Sensors as Promising Flexible Devices, State of the Art, Part 2: Humidity-Sensor Performances.

This review article covers all types of paper-based humidity sensor, such as capacitive, resistive, impedance, fiber-optic, mass-sensitive, microwave, and RFID (radio-frequency identification) humidity sensors. The parameters of these sensors and the materials involved in their research and development, such as carbon nanotubes, graphene, semiconductors, and polymers, are comprehensively detailed, with a special focus on the advantages/disadvantages from an application perspective. Numerous technological/design approaches to the optimization of the performances of the sensors are considered, along with some non-conventional approaches.

Application of Titanium Carbide MXenes in Chemiresistive Gas Sensors.

The titanium carbide MXenes currently attract an extreme amount of interest from the material science community due to their promising functional properties arising from the two-dimensionality of these layered structures. In particular, the interaction between MXene and gaseous molecules, even at the physisorption level, yields a substantial shift in electrical parameters, which makes it possible to design gas sensors working at RT as a prerequisite to low-powered detection units. Herein, we consider to review such sensors, primarily based on TiCT and TiCT crystals as the most studied ones to date, delivering a chemiresistive type of signal.

Fluorinated graphene grating metasurface for terahertz dark state excitation.

We propose an original technique for the grating metasurfaces fabrication by low-power ultraviolet laser treatment of fluorinated graphene (FG) films with the focus on terahertz applications. The laser treatment reduces dielectric FG to its conductive counterparts, increasing DC conductivity to 170 S·mfor treated areas. The electromagnetic response of the grating metasurfaces studied by THz time-domain spectroscopy in the 100 GHz-1 THz frequency range demonstrates enhanced resonant transmittance through metasurfaces.

Adsorption kinetics of NO gas on oxyfluorinated graphene film.

We report the fabrication of high-performance NO gas sensors based on oxyfluorinated graphene (OFG) layers. At room temperature, the times of adsorption/desorption of NO on/from the surface of thin OFG films are less than 1200 s and can be reduced by increasing the operation temperature. The sensors are capable of detecting NO molecules at sub-ppm level with a sensitivity of 0.

UV-Light-Tunable p-/n-Type Chemiresistive Gas Sensors Based on Quasi-1D TiS Nanoribbons: Detection of Isopropanol at ppm Concentrations.

The growing demand of society for gas sensors for energy-efficient environmental sensing stimulates studies of new electronic materials. Here, we investigated quasi-one-dimensional titanium trisulfide (TiS) crystals for possible applications in chemiresistors and on-chip multisensor arrays. TiS nanoribbons were placed as a mat over a multielectrode chip to form an array of chemiresistive gas sensors.

Modeling Interfacial Interaction between Gas Molecules and Semiconductor Metal Oxides: A New View Angle on Gas Sensing.

With the development of internet of things and artificial intelligence electronics, metal oxide semiconductor (MOS)-based sensing materials have attracted increasing attention from both fundamental research and practical applications. MOS materials possess intrinsic physicochemical properties, tunable compositions, and electronic structure, and are particularly suitable for integration and miniaturization in developing chemiresistive gas sensors. During sensing processes, the dynamic gas-solid interface interactions play crucial roles in improving sensors' performance, and most studies emphasize the gas-MOS chemical reactions.

Printing Technologies as an Emerging Approach in Gas Sensors: Survey of Literature.

Herein, we review printing technologies which are commonly approbated at recent time in the course of fabricating gas sensors and multisensor arrays, mainly of chemiresistive type. The most important characteristics of the receptor materials, which need to be addressed in order to achieve a high efficiency of chemisensor devices, are considered. The printing technologies are comparatively analyzed with regard to, (i) the rheological properties of the employed inks representing both reagent solutions or organometallic precursors and disperse systems, (ii) the printing speed and resolution, and (iii) the thickness of the formed coatings to highlight benefits and drawbacks of the methods.

Toward a Selective Analysis of Heavy Metal Salts in Aqueous Media with a Fluorescent Probe Array.

Detection of heavy meals in aqueous media challenges worldwide research in developing particularly fast and affordable methods. Fluorescent sensors look to be an appropriate instrument for such a task, as recently they have been found to have made large progress in the detection of chemical analytes, primarily in the environment, along with biological fluids, which still suffer from not enough selectivity. In this work, we propose a new fluorescent method to selectively recognize heavy metals in an aqueous solution via employing an array of several fluorescent probes: acridine yellow, eosin, and methylene blue, which were taken as examples, being sensitive to a microsurrounding of the probe molecules.

A Blueprint for the Synthesis and Characterization of Thiolated Graphene.

Graphene derivatization to either engineer its physical and chemical properties or overcome the problem of the facile synthesis of nanographenes is a subject of significant attention in the nanomaterials research community. In this paper, we propose a facile and scalable method for the synthesis of thiolated graphene via a two-step liquid-phase treatment of graphene oxide (GO). Employing the core-level methods, the introduction of up to 5.

2D Molybdenum Carbide MXenes for Enhanced Selective Detection of Humidity in Air.

2D transition metal carbides and nitrides (MXenes) open up novel opportunities in gas sensing with high sensitivity at room temperature. Herein, 2D Mo CT flakes with high aspect ratio are successfully synthesized. The chemiresistive effect in a sub-µm MXene multilayer for different organic vapors and humidity at 10 -10  ppm in dry air is studied.

Enhancement of Volumetric Capacitance of Binder-Free Single-Walled Carbon Nanotube Film via Fluorination.

Robust electrode materials without the addition of binders allow increasing efficiency of electrical storage devices. We demonstrate the fabrication of binder-free electrodes from modified single-walled carbon nanotubes (SWCNTs) for electrochemical double-layer capacitors (EDLCs). Modification of SWCNTs included a sonication in 1,2-dichlorobenzene and/or fluorination with gaseous BrF at room temperature.

Transiently structured head domains control intermediate filament assembly.

Low complexity (LC) head domains 92 and 108 residues in length are, respectively, required for assembly of neurofilament light (NFL) and desmin intermediate filaments (IFs). As studied in isolation, these IF head domains interconvert between states of conformational disorder and labile, β-strand-enriched polymers. Solid-state NMR (ss-NMR) spectroscopic studies of NFL and desmin head domain polymers reveal spectral patterns consistent with structural order.

Microplotter-Printed On-Chip Combinatorial Library of Ink-Derived Multiple Metal Oxides as an "Electronic Olfaction" Unit.

Information about the surrounding atmosphere at a real timescale significantly relies on available gas sensors to be efficiently combined into multisensor arrays as electronic olfaction units. However, the array's performance is challenged by the ability to provide orthogonal responses from the employed sensors at a reasonable cost. This issue becomes more demanded when the arrays are designed under an on-chip paradigm to meet a number of emerging calls either in the internet-of-things industry or in situ noninvasive diagnostics of human breath, to name a few, for small-sized low-powered detectors.

Dynamic structural order of a low-complexity domain facilitates assembly of intermediate filaments.

The coiled-coil domains of intermediate filament (IF) proteins are flanked by regions of low sequence complexity. Whereas IF coiled-coil domains assume dimeric and tetrameric conformations on their own, maturation of eight tetramers into cylindrical IFs is dependent on either "head" or "tail" domains of low sequence complexity. Here we confirm that the tail domain required for assembly of Tm1-I/C IFs functions by forming labile cross-β interactions.

Chemiresistive Properties of Imprinted Fluorinated Graphene Films.

The electrical conductivity of graphene materials is strongly sensitive to the surface adsorbates, which makes them an excellent platform for the development of gas sensor devices. Functionalization of the surface of graphene opens up the possibility of adjusting the sensor to a target molecule. Here, we investigated the sensor properties of fluorinated graphene films towards exposure to low concentrations of nitrogen dioxide NO.

Erratum: Size dependence of the surface tension of a free surface of an isotropic fluid [Phys. Rev. E 95, 062801 (2017)].

This corrects the article DOI: 10.1103/PhysRevE.95.

Electronic Structure of Nitrogen- and Phosphorus-Doped Graphenes Grown by Chemical Vapor Deposition Method.

Heteroatom doping is a widely used method for the modification of the electronic and chemical properties of graphene. A low-pressure chemical vapor deposition technique (CVD) is used here to grow pure, nitrogen-doped and phosphorous-doped few-layer graphene films from methane, acetonitrile and methane-phosphine mixture, respectively. The electronic structure of the films transferred onto SiO/Si wafers by wet etching of copper substrates is studied by X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy using a synchrotron radiation source.