Mechanical Synthesis and Calorimetric Studies of the Enthalpies of Formation of Chosen Mg-Pd Alloys.

Despite many years of research and continuous improvements in scientific equipment, some of the thermodynamic properties of binary systems are still unknown, or are only theoretically predicted or calculated. This situation often arises from the difficulties in preparing alloys for experimental measurements. The alloys from the Mg-Pd system, especially for the Pd-rich side, are difficult to produce, and the availability of thermodynamic data is very limited.

Non-Wetting and Non-Reactive Behavior of Liquid Pure Magnesium on Pure Tungsten Substrates.

The wetting behavior of liquid magnesium drop on pure tungsten substrates was investigated, for the first time, with the sessile drop method combined with non-contact heating and capillary purification of a Mg drop from a native oxide film. A specially designed apparatus dedicated to the investigation of the high-temperature interaction of dissimilar materials was used. The comparative experiments were performed under isothermal conditions at temperatures of 700 °C and 740 °C using two atmospheres: Ar + 5 wt.

Modelling of the Flow in the Process of Washing Out Automotive Catalyst Carriers with the PbLi Alloy.

The process of platinum recovery from used car catalysts is highly desirable for both economic and environmental reasons. From the many available methods of processing used car catalysts, the article conducted both numerical and experimental studies using a device based on the collector metal method with lead as a modified medium through a magnetohydrodynamic pump for washing platinum from the channels of the ceramic catalyst carrier. It was assumed that lead alloys with the addition of lithium increase the extraction of platinum from thin catalytic layers and accelerate the platinum dissolution reaction in the Pb-Li alloy, which is the result of a greater affinity of lithium for platinum compared to lead.

Hydrogen Sorption Behavior of Cast Ag-Mg Alloys.

In this paper, the hydrogen sorption properties of casted Ag-Mg alloys were investigated. The obtained alloys were structurally analyzed by X-ray diffraction (XRD) and observed by scanning electron microscopy (SEM). The study was carried out for four alloys from the two-phase region (Mg) + γ' (AgMg) with nominal concentrations of 5 wt.

Calorimetric Studies of Magnesium-Rich Mg-Pd Alloys.

Solution calorimetry with liquid aluminum as the bath was conducted to measure the enthalpy of a solution of magnesium and palladium as well as the standard formation enthalpies of selected magnesium-palladium alloys. These alloys were synthesized from pure elements, which were melted in a resistance furnace that was placed in a glove box containing high-purity argon and a very low concentration of impurities, such as oxygen and water vapor. A Setaram MHTC 96 Line evo drop calorimeter was used to determine the energetic effects of the solution.

The Ag-Li system's experimental and thermodynamic dataset.

The Ag-Li system was analysed using first-principles calculations 10.1016/j.jallcom.