Tunable spatiotemporal mode-locked fiber laser at 1.55 μm.

We report the spatiotemporal mode-locked multimode fiber laser operating at 1.55 µm based on semiconductor saturable absorber mirrors with the mode-locking threshold as low as 104 mW. Benefiting from the multimode interference filtering effect introduced in the laser cavity not only the central wavelength can be continuously tuned from 1557 nm to 1567 nm, but also the number of the output pulses can be adjusted from 1 to 4 by simply adjusting the polarization controllers.

Scaling of average power in sub-MW peak power Yb-doped tapered fiber picosecond pulse amplifiers.

Prospects for average power scaling of sub-MW output peak power picosecond fiber lasers by utilization of a Yb-doped tapered fiber at the final amplification stage were studied. In this paper, it was shown experimentally that a tapered fiber allows the achievement of an average power level of 150 W (limited by the available pump power) with a peak power of 0.74 MW for 22 ps pulses with no signs of transverse mode instability.

Spectral filtering in single-mode fibers using resonant coupling with absorbing rods.

We investigate (both theoretically and experimentally) a method for fundamental mode spectral filtering in single-mode optical fibers using the resonant mode coupling effect. We demonstrate the possibility of controlling the spectral bandwidth of the fundamental mode suppression band through appropriate choice of fiber parameters and fiber bending. The developed technique can be very useful for the design of fiber-based spectral filters (i.

Efficient single-mode 976 nm amplifier based on a 45 micron outer diameter Yb-doped fiber.

In this paper, we present a novel single-mode Yb-doped fiber with 14 µm core and 45 µm cladding diameter. A 976 nm all-fiber high-power amplifier was manufactured based on this fiber. 10-mm-long fiber taper was used to launch the pump light, and guidance of the high NA pump was provided by a glass-air interface.

High-order mode suppression in double-clad optical fibers by adding absorbing inclusions.

We proposed and experimentally demonstrated a technique for the suppression of unwanted modes in double-clad fibers with a high core-to-clad diameter ratio by introducing high-index absorbing inclusions into the first cladding of the fibers. These inclusions disturb the shape of undesirable modes, and a noticeable part of the power becomes localized inside the inclusion, resulting in an increase in the propagation loss of these modes. Two fiber designs were studied and realized: one with cylindrical symmetry and an absorbing high-index ring as the inclusion and another with high-index absorbing rods inserted around the fiber core.

All-fiber polarization-maintaining mode-locked laser operated at 980 nm.

For the first time, to the best of our knowledge, we present an all-fiber polarization-maintaining passively mode-locked picosecond laser operated at 980 nm. The laser cavity had a ring configuration with a semiconductor saturable absorber mirror as a mode-locking element. As an active medium, we used a specially designed cladding-pumped Yb-doped fiber with reduced cladding-to-core diameter ratio.

Sub-MW peak power diffraction-limited chirped-pulse monolithic Yb-doped tapered fiber amplifier.

We demonstrate a novel amplification regime in a counter-pumped, relatively long (2 meters), large mode area, highly Yb-doped and polarization-maintaining tapered fiber, which offers a high peak power directly from the amplifier. The main feature of this regime is that the amplifying signal propagates through a thin part of the tapered fiber without amplification and experiences an extremely high gain in the thick part of the tapered fiber, where most of the pump power is absorbed. In this regime, we have demonstrated 8 ps pulse amplification to a peak power of up to 0.

Low-loss hybrid fiber with zero dispersion wavelength shifted to 1 µm.

We proposed and investigated a novel type of all-glass hybrid fiber where light is confined in the low-index core due to both total internal reflection and coherent Fresnel reflection (a photonic bandgap mechanism). The hybrid mode has an anomalous dispersion of 13 ps/(nm km) at 1064 nm and low loss (~6 dB/km), and it can be easily excited by splicing with a single-mode step-index fiber. The compression of positively chirped 8 ps pulses down to 330 fs was demonstrated with the fabricated hybrid fiber.

Very-large-mode-area photonic bandgap Bragg fiber polarizing in a wide spectral range.

A design of a polarizing all-glass Bragg fiber with a microstructure core has been proposed for the first time. This design provides suppression of high-order modes and of one of the polarization states of the fundamental mode. The polarizing fiber was fabricated by a new, simple method based on a combination of the modified chemical vapor deposition (MCVD) process and the rod-in-tube technique.