Adsorption of Colloidal Nanoparticles to Supports: Employing Electrostatic Charge Screening and Barrierless Self-Assembly as Nanointegration Strategy.

Surfactant-free nanoparticles can be adsorbed on a support material by electrostatic deposition which requires electrostatic attraction between the nanoparticles and the support material. However, when nanoparticles and support have a similar isoelectric point (IEP), it is difficult to create such electrostatically attractive conditions and trigger the adsorption process by pH adjustment. In this work, we present an alternative approach to support laser-generated metal nanoparticles by controlled precipitation onto thin graphene oxide (GO) nanosheets via a kinetically barrierless process induced by high ionic strength.

Laser synthesis of nanoparticles in organic solvents - products, reactions, and perspectives.

Laser synthesis and processing of colloids (LSPC) is an established method for producing functional and durable nanomaterials and catalysts in virtually any liquid of choice. While the redox reactions during laser synthesis in water are fairly well understood, the corresponding reactions in organic liquids remain elusive, particularly because of the much greater complexity of carbon chemistry. To this end, this article first reviews the knowledge base of chemical reactions during LSPC and then deduces identifiable reaction pathways and mechanisms.

Physical Regimes and Mechanisms of Picosecond Laser Fragmentation of Gold Nanoparticles in Water from X-ray Probing and Atomistic Simulations.

Laser fragmentation in liquids has emerged as a promising green chemistry technique for changing the size, shape, structure, and phase composition of colloidal nanoparticles, thus tuning their properties to the needs of practical applications. The advancement of this technique requires a solid understanding of the mechanisms of laser-nanoparticle interactions that lead to the fragmentation. While theoretical studies have made impressive practical and mechanistic predictions, their experimental validation is required.

The multivariate interaction between Au and TiO colloids: the role of surface potential, concentration, and defects.

The established DLVO theory explains colloidal stability by the electrostatic repulsion between electrical double layers. While the routinely measured zeta potential can estimate the charges of double layers, it is only an average surface property which might deviate from the local environment. Moreover, other factors such as the ionic strength and the presence of defects should also be considered.

Impact of Chemical and Physical Properties of Organic Solvents on the Gas and Hydrogen Formation during Laser Synthesis of Gold Nanoparticles.

Laser ablation in liquids has been established as a scalable preparation method of nanoparticles for various applications. Particularly for materials prone to oxidation, it is established to suppress oxidation by using organic solvents as a liquid medium. While this often functionalizes the nanoparticles with a carbon shell, the related chemical processes that result from laser-induced decomposition reactions of the organic solvents remain uncertain.

Photomechanical Laser Fragmentation of IrO Microparticles for the Synthesis of Active and Redox-Sensitive Colloidal Nanoclusters.

Pulsed laser fragmentation of microparticles (MPs) in liquid is a synthesis method for producing high-purity nanoparticles (NPs) from virtually any material. Compared with laser ablation in liquids (LAL), the use of MPs enables a fully continuous, single-step synthesis of colloidal NPs. Although having been employed in several studies, neither the fragmentation mechanism nor the efficiency or scalability have been described.

Differentiating between Acidic and Basic Surface Hydroxyls on Metal Oxides by Fluoride Substitution: A Case Study on Blue TiO from Laser Defect Engineering.

Both oxygen vacancies and surface hydroxyls play a crucial role in catalysis. Yet, their relationship is not often explored. Herein, we prepare two series of TiO (rutile and P25) with increasing oxygen deficiency and Ti concentration by pulsed laser defect engineering in liquid (PUDEL), and selectively quantify the acidic and basic surface OH by fluoride substitution.

Disproportional surface segregation in ligand-free gold-silver alloy solid solution nanoparticles, and its implication for catalysis and biomedicine.

Catalytic activity and toxicity of mixed-metal nanoparticles have been shown to correlate and are known to be dependent on surface composition. The surface chemistry of the fully inorganic, ligand-free silver-gold alloy nanoparticle molar fraction series, is highly interesting for applications in heterogeneous catalysis, which is determined by active surface sites which are also relevant for understanding their dissolution behavior in biomedically-relevant ion-release scenarios. However, such information has never been systematically obtained for colloidal nanoparticles without organic surface ligands and has to date, not been analyzed in a surface-normalized manner to exclude density effects.

Nanocomposite Concept for Electrochemical Preparation of Pt-Au Alloy Nanoparticles for Formic Acid Oxidation.

Herein, we report a straightforward approach for the preparation of Pt-Au alloy nanoparticles from Pt + Au/C nanocomposites using monometallic colloidal nanoparticles as starting blocks. Four different compositions with fixed Pt content and varying Pt to Au mass ratios from 1:1 up to 1:7 were prepared as formic acid oxidation reaction (FAOR) catalysts. The study was carried out in a gas diffusion electrode (GDE) setup.

Impact of Single-Pulse, Low-Intensity Laser Post-Processing on Structure and Activity of Mesostructured Cobalt Oxide for the Oxygen Evolution Reaction.

Herein, we report nanosecond, single-pulse laser post-processing (PLPP) in a liquid flat jet with precise control of the applied laser intensity to tune structure, defect sites, and the oxygen evolution reaction (OER) activity of mesostructured CoO. High-resolution X-ray diffraction (XRD), Raman, and X-ray photoelectron spectroscopy (XPS) are consistent with the formation of cobalt vacancies at tetrahedral sites and an increase in the lattice parameter of CoO after the laser treatment. X-ray absorption spectroscopy (XAS) and X-ray emission spectroscopy (XES) further reveal increased disorder in the structure and a slight decrease in the average oxidation state of the cobalt oxide.

Design and perspective of amorphous metal nanoparticles from laser synthesis and processing.

Amorphous metal nanoparticles (A-NPs) have aroused great interest in their structural disordering nature and combined downsizing strategies (e.g. nanoscaling), both of which are beneficial for highly strengthened properties compared to their crystalline counterparts.

Continuous-Flow Flat Jet Setup for Uniform Pulsed Laser Postprocessing of Colloids.

Pulsed laser postprocessing (PLPP) of colloidal nanoparticles and related laser fragmentation in liquid (LFL) using a liquid jet setup have become an acknowledged tool to reduce the nanoparticle diameter down to a few nanometers, alter the crystal phase, or increase the defect density under high-purity and continuous-flow conditions. In recent studies on LFL that were conducted with a cylindrical liquid jet, intensity gradients and related incomplete illumination of the volume element passing through the laser beam path were reported to cause a broadening of the product particle size distribution, melting, and phase segregation. In this paper, we present a new flat jet design, which reduces the deviation of the laser intensity up to 10 times compared to the conventional cylindrical liquid jet.

Room-Temperature Laser Synthesis in Liquid of Oxide, Metal-Oxide Core-Shells, and Doped Oxide Nanoparticles.

Although oxide nanoparticles are ubiquitous in science and technology, a multitude of compositions, phases, structures, and doping levels exist, each one requiring a variety of conditions for their synthesis and modification. Besides, experimental procedures are frequently dominated by high temperatures or pressures and by chemical contaminants or waste. In recent years, laser synthesis of colloids emerged as a versatile approach to access a library of clean oxide nanoparticles relying on only four main strategies running at room temperature and ambient pressure: laser ablation in liquid, laser fragmentation in liquid, laser melting in liquid and laser defect-engineering in liquid.

In situ structural kinetics of picosecond laser-induced heating and fragmentation of colloidal gold spheres.

Fragmentation of colloidal 54 nm gold nanoparticles by picosecond laser pulses is recorded by time-resolved X-ray scattering, giving access to structural dynamics down to a 80 ps resolution. Lattice temperature and energy dissipation have been quantified to verify that the maximum applied fluence of 1800 J m heats up the particles close to boiling. Already within 30 ns, particles with significantly lower particle sizes of 2 to 3 nm are detected, which hints towards an ultrafast process either by a thermal phase explosion or Coulomb instability.

Promoting the Electrocatalytic Performance of Noble Metal Aerogels by Ligand-Directed Modulation.

Noble metal aerogels (NMAs) are an emerging class of porous materials. Embracing nano-sized highly-active noble metals and porous structures, they display unprecedented performance in diverse electrocatalytic processes. However, various impurities, particularly organic ligands, are often involved in the synthesis and remain in the corresponding products, hindering the investigation of the intrinsic electrocatalytic properties of NMAs.

Effective size separation of laser-generated, surfactant-free nanoparticles by continuous centrifugation.

High-power, nanosecond, pulsed-laser ablation in liquids enables the continuous synthesis of highly pure colloidal nanoparticles (NPs) at an application-relevant scale. The gained mass-weighted particle size distribution is however often reported to be broad, requiring post treatment like centrifugation to remove undesired particle size fractions. To date, available centrifugation techniques are generally discontinuous, limiting the throughput and hindering economic upscaling.