Ultra-low reflection of sub-THz waves in graphene-based composite with metasurface for stealth technology.

Sub-wavelength metasurfaces offer opportunities to develop efficient stealth technologies that are increasingly significant in modern civil and military applications. Here, we demonstrate that a highly efficient flexible graphene-based composite sub-THz radiation absorber can also act as an ultra-low reflection material with reflectivity as low as 0.12%.

Comparison of double-phase hologram and binary amplitude encoding: holographic projection and vortex beam generation.

Utilizing computer-generated holograms is a promising technique because these holograms can theoretically generate arbitrary waves with high light efficiency. In phase-only spatial light modulators, encoding complex amplitudes into phase-only holograms is a significant issue, and double-phase holograms have been a popular encoding technique. However, they reduce the light efficiency.

Pixel-level phase filters for off-axis shifting of sinc envelope in holographic projection.

Off-axis projection is a common practice for reconstructions of Fourier holograms displayed on liquid crystal on silicon (LCoS) spatial light modulators (SLMs), as it spatially separates the image from the undiffracted light. Binary gratings encoded within the holograms enable maximum angular separation. However, as a result, two mirror images of equal intensities are present in the reconstruction.

Accelerating hologram generation using oriented-separable convolution and wavefront recording planes.

Recently, holographic displays have gained attention owing to their natural presentation of three-dimensional (3D) images; however, the enormous amount of computation has hindered their applicability. This study proposes an oriented-separable convolution accelerated using the wavefront-recording plane (WRP) method and recurrence formulas. We discuss the orientation of 3D objects that affects computational efficiency, which is overcome by reconsidering the orientation, and the suitability of the proposed method for hardware implementations.

Vortex beam as a positioning tool.

Remote positioning by precise measurements of lateral displacements of laser beams at large distances is inevitably disturbed by the influence of atmospheric turbulences. Here we propose the use of optical vortices, which exhibit lower transversal variations at an experimentally validated range of 100 meters. We show the higher precision of the localization of vortex points as compared with standard centroid-based assessment of Gaussian beams.

Real-valued layer-based hologram calculation.

Layer-based hologram calculations generate holograms from RGB and depth images by repeating diffraction calculations using complex Fourier transforms (FTs). Holograms generated as such are suitable for near-eye display and can be easily reconstructed with good image quality, but they are computationally expensive because of multiple complex-valued operations, including complex FTs. In this study, we propose an acceleration method for layer-based hologram calculations by reducing time-consuming complex-valued operations using the real-valued FT and Hartley transform as real linear transformations.

Suppression of spurious image duplicates in Fourier holograms by pixel apodization of a spatial light modulator.

Holographic projectors and near-eye displays are a promising technology with truly three-dimensional, natural viewing and excellent energetic efficiency. Spatial light modulators with periodic pixel matrices cause image duplicates, which distract the viewer and waste energy of the playback beam. We present the engineering of the far field intensity envelope, which suppresses higher-order image duplicates in the simplest possible optical setup by physically changing the shape of modulator pixels with attached apodizing masks.

Miniature holographic projector with cloud computing capability.

A fully functional miniaturized projection head below 5   is presented, using computer-generated holograms dynamically displayed on a liquid-crystal spatial light modulator. Spatial division of the modulator is used for color projection without color breakup, and specially designed, anti-reflection coated prisms ensure simple light paths with small losses. Real-time calculations are performed on a remote server with on-the-fly compression of holographic fringes.

Graphene-based plastic absorber for total sub-terahertz radiation shielding.

Increasing the requirements on telecommunications systems such as the need for higher data rates and connectivity via the Internet of things results in continuously increasing amounts of electromagnetic radiation in ever-higher telecommunications bands (up to terahertz). This can generate unwanted electromagnetic radiation that can affect the operation of electronic devices and human health. Here, we demonstrate that nonconductive and lightweight, graphene-based composites can shield more than 99.

Terahertz 3D printed diffractive lens matrices for field-effect transistor detector focal plane arrays.

We present the concept, the fabrication processes and the experimental results for materials and optics that can be used for terahertz field-effect transistor detector focal plane arrays. More specifically, we propose 3D printed arrays of a new type - diffractive multi-zone lenses of which the performance is superior to that of previously used mono-zone diffractive or refractive elements and evaluate them with GaN/AlGaN field-effect transistor terahertz detectors. Experiments performed in the 300-GHz atmospheric window show that the lens arrays offer both a good efficiency and good uniformity, and may improve the signal-to-noise ratio of the terahertz field-effect transistor detectors by more than one order of magnitude.

High order kinoforms as a broadband achromatic diffractive optics for terahertz beams.

We discuss thin optical structures that allow chromatic aberrations to be avoided in the THz domain. The paper contains the theoretical considerations, computer modeling and experimental evaluation of the high order kinoform diffractive elements in the THz range. According to the obtained results application of the high order kinoforms enables broadband operation in the THz range.

Surface profilometry with binary axicon-vortex and lens-vortex optical elements.

We report on the interesting effect observed with the diffractive binary element, which matches the property of an axicon and vortex lens. Binary phase coding simplifies the manufacturing process and gives additional advantages for metrology purposes. Under laser beam illumination, our element produces two waves: converging and diverging.

Evaluation of the shadow effect in terahertz kinoform gratings.

The experimental and numerical evaluation of the shadow effect in kinoform diffractive gratings for the terahertz (THz) range is given. This effect limits the diffractive efficiency of dense gratings, which are the base of the elements suited for convenient beam focusing and imaging in THz. The observed effect of redirecting most of the incident energy into stray -1st diffractive order is observed and discussed.

Diffuserless holographic projection working on twin spatial light modulators.

An improved efficient projection of holographic images is presented. It uses two phase spatial light modulators (SLMs) with two iteratively optimized Fresnel holograms displayed simultaneously--each for one modulator. The phase distribution on the second modulator is taking into account the light distribution coming from the first one.

Simple holographic projection in color.

Extremely simplified image projection technique based on optical fibers and a single Spatial Light Modulator is presented. Images are formed by addressing the modulator with especially iterated Fourier holograms, precisely aligned on the projection screen using phase factors of lenses and gratings. Focusing is done electronically with no moving parts.

Modeling of the optical system illuminated by quasi-monochromatic spatially incoherent light: new numerical approach.

This Letter presents a new method for modeling of complex optical setups illuminated by quasi monochromatic spatially incoherent light. The algorithm provides better performance and quality than other modeling methods both for isoplanatic and nonisoplanatic systems. The algorithm maintains energy relations, image orientation, and magnification of the system.

Diffractive paper lens for terahertz optics.

Passive terahertz (THz) setups require optical elements with large diameters for optimal harvesting of weak signals. High f-number implies sophisticated aspheric designs to ensure optimal resolution and good energetic efficiency. Trial and error testing of such optics is expensive and numerical modeling is time consuming; hence, we propose extremely cheap diffractive lenses for THz made of regular paper.

Highly efficient broadband double-sided Fresnel lens for THz range.

Modern passive THz setups require effective optical elements with a large numerical aperture. Here we propose a new type of the optical element for THz applications, which is a broadband double-sided Fresnel-like lens with an optimized thickness. The optimization is performed to obtain a very low attenuation, low material cost, and small weight in the element media.

Efficient image projection by Fourier electroholography.

An improved efficient projection of color images is presented. It uses a phase spatial light modulator with three iteratively optimized Fourier holograms displayed simultaneously--each for one primary color. This spatial division instead of time division provides stable images.

Color image projection based on Fourier holograms.

A method of color image projection is experimentally validated. It assumes a simultaneous illumination of a spatial light modulator (SLM) with three laser beams converging in a common point on a projection screen. The beams are masked with amplitude filters so that each one illuminates one third of the area of the SLM.

Experimental evaluation of a full-color compact lensless holographic display.

An iterative phase retrieval method for a lensless color holographic display using a single light modulator is experimentally validated. The technique involves iterative calculation of a three-plane synthetic hologram which is displayed on a SLM simultaneously lit with three laser beams providing an RGB illumination. Static and animated two-dimensional flicker-free full color images are reconstructed at a fixed position and captured using a high resolution CMOS sensor.

Angle-dependent encoding of multiple asymmetric symbols in a binary phase hologram with a spatial segmentation.

A method of encoding multiple asymmetric symbols into a single thin binary Fourier hologram is presented. It assumes a combination of a spatial segmentation and carrier frequencies in order to achieve multiple reconstructed images selectable by the angle of the incident laser beam. The proper segmentation function with an optimized period allows us to encode a number of different objects with little loss of reconstruction quality.