Long-term survivorship of an exchangeable-neck hip prosthesis with a Ti-alloy/Ti-alloy neck-stem junction.

Introduction: Breakage of exchangeable-neck (EN) and adverse local tissue reactions (ALTRs) to neck-stem junction (NSJ) damage products are responsible for increasing the revision rate of EN hip prostheses. We investigated the survivorship of an EN hip prosthesis including a NSJ with both components made of titanium alloy (Ti-alloy/Ti-alloy) to assess whether, and to what extent, EN breakage and NSJ damage affected implant survivorship.

Materials And Methods: Using data from a hip replacement registry, we determined survivorship of 2857 EN prostheses.

Analysis of the surface topography of retrieved metal-on-polyethylene reverse shoulder prostheses.

Despite the encouraging short- and medium-term clinical results and increased usage of reverse shoulder replacements, a higher revision rate is documented compared with other major joint arthroplasties. Adverse reaction to polyethylene wear debris is still an important factor which may influence the long-term survival of reverse shoulder arthroplasty. To date, only a small number of retrieval studies of reverse shoulder arthroplasty have reported the different damage modes on polyethylene components, but none have quantified the surface roughness on both articulating surfaces.

Mixed ceramic combinations in primary total hip arthroplasty achieved reassuring mid-to-longterm outcomes.

Introduction: Ceramic-on-ceramic couplings demonstrated to be reliable bearings in primary total hip arthroplasty (THA), with long-term remarkable results. Like-on-like configurations were widely described. On the contrary, mixed material combinations from the same manufacturer, Delta-on-Forte or Forte-on-Delta, were poorly studied.

What are the influencing factors on hip and knee arthroplasty survival? Prospective cohort study on 63619 arthroplasties.

Background: Body mass index is used by the World Health Organization to classify obesity. While obesity influences the onset of arthritis and type-2 diabetes, its effect on implant survival is still open to debate, with conflicting results from clinical and registry studies, as well as meta-analyses. Other known factors such as gender or diabetes status could ponderate or mask the effect of BMI on implant survival.

Squeaking and other noises in patients with ceramic-on-ceramic total hip arthroplasty.

Introduction: Noise in ceramic-on-ceramic (CoC) total hip arthroplasty (THA) is a potential symptom of abnormal bearing wear. Squeaking and other prosthetic hip noises are multi-factorial phenomena that can be analysed and may provide prognostic information.

Methods: 46 patients with noisy CoC bearings were investigated using X-ray, computed tomography and joint fluid analysis, and classified into either high or low risk of ceramic liner fracture groups according to previously published guidelines.

Ischemia-Modified Albumin Expression: Is there a Difference between Male and Female Subjects?

Background: Ischemia-modified albumin (IMA) derives from naive albumin, modified in the binding region of bivalent ions, as cobalt and iron. The cobalt, released from some types of hip prosthesis seems to be metabolized differently in males and females but the iron ion is more prevalent than cobalt and is detectable in the healthy population. Our aim was to verify if there are any gender- and age-related differences in IMA concentrations and if IMA correlates with cobalt and iron-related proteins.

MoM total hip replacements in Europe: a NORE report.

The purpose of this paper is to determine the prevalence of metal-on-metal (MoM) total hip replacement (THR) in European registries, to assess the incidence of revision surgery and to describe the national follow-up guidelines for patients with MoM THR including resurfacings.Eleven registries of the Network of Orthopaedic Registries of Europe (NORE) participated totalling 54 434 resurfacings and 58 498 large stemmed MoM THRs.The resurfacings and stemmed large head MoM had higher pooled revision rates at five years than the standard total hip arthroplasties (THA): 6.

Delta-on-Delta Ceramic Bearing Surfaces in Revision Hip Arthroplasty.

Background: Fourth-generation ceramic-on-ceramic couplings were developed to improve ceramic toughness and strength. Encouraging outcomes in primary total hip arthroplasty were reported. This coupling was proposed as an attractive option even in the case of revision procedures, particularly in younger patients with a longer life expectancy.

Unilateral versus bilateral total knee arthroplasty: A registry study on survival and risk factors.

Background: Bilateral cases, representing at least 25% of total knee arthroplasties (TKA), could convey a statistical bias linked to dependency. Registries allow exploring this issue, susceptible to question surgeon validated protocols. Do bilateral total knee arthroplasties behave differently than unilateral knees in terms of implant survival?

Hypothesis: Bilateral TKA have a better survival than unilateral TKA.

Component positioning and ceramic damage in cementless ceramic-on-ceramic total hip arthroplasty.

Background: In ceramic-on-ceramic (CoC) total hip arthroplasty (THA), component positioning demonstrated to influence the bearing damage: however the connection between angles and clinical outcomes at long-term follow-ups is currently lacking. Aims of this study were: the computer tomography (CT) assessment of component positioning in CoC THAs; the correlation analysis between positioning and ceramic damage; the identification of safe zones.

Methods: 91 consecutive post-operative CT scans including two types of CoC implants, with a mean follow-up of 12 ± 4.

Preoperative valgus deformity has twice the risk of failure as compared to varus deformity after total knee arthroplasty.

Purpose: The aim of this study was to assess whether preoperative valgus or varus deformity affected survivorship after total knee arthroplasty (TKA) and to quantify the risk factors for implant failure in a registry-based population.

Methods: The Emilia-Romagna Registry of Prosthetic Orthopedic Implants was examined regarding TKAs performed on patients with a preoperative diagnosis of valgus or varus deformity. Demographics, implant characteristic and survivorships were investigated and compared.

Highly porous titanium cup in cementless total hip arthroplasty: registry results at eight years.

Purpose: Highly porous cups were developed to improve osseointegration and reduce the rate of aseptic loosening. Highly porous titanium cups could mix the reliability of titanium metal with an enhanced porosity, improving the bony ingrowth. The aim of this report was to assess the survival rates and reasons for revision of a highly porous titanium cup, Fixa Ti-Por (Adler Ortho, Milan, Italy), fabricated using an additive manufacturing.

The influence of bearing surfaces on periprosthetic hip infections: analysis of thirty nine thousand, two hundred and six cementless total hip arthroplasties.

Purpose: Periprosthetic hip infection (PHI) is a devastating complication. The association between PHI and bearing surfaces as well as patient-related factors has been recently investigated, with contradictive outcomes. The dataset of Emilia-Romagna region Registry for Orthopaedic Prosthetic Implants (RIPO) has been assessed to investigate, if the bearing choice influenced the risk of septic loosening occurrence.

Short Stems Versus Conventional Stems in Cementless Total Hip Arthroplasty: A Long-Term Registry Study.

Background: Short stems in total hip arthroplasty (THA) have recently gained increasing popularity, allowing mini-invasive exposures and bone-sparing approaches. However, long-term studies and recommendations for the routine use are not available. The aim of this report was to compare the survival rates and the reasons for revision of short stems versus conventional stems in cementless THAs, in a registry-based population.

Is Cross-Linked Polyethylene an Improvement Over Conventional Ultra-High Molecular Weight Polyethylene in Total Knee Arthroplasty?

Background: Reducing polyethylene (PE) wear by increasing the cross-linking encouraged surgeons to hope for increased total knee arthroplasty (TKA) survival rates. Different methods of manufacturing cross-linked polyethylene (XLPE) were introduced, following promising in vitro results. Is there a measurable effect of cross-linking on TKA survival?

Methods: A registry study was conducted, focusing on fixed tibial inserts in primary TKA.

In Vivo Damage of the Head-Neck Junction in Hard-on-Hard Total Hip Replacements: Effect of Femoral Head Size, Metal Combination, and 12/14 Taper Design.

Recently, concerns have been raised about the potential effect of head-neck junction damage products at the local and systemic levels. Factors that may affect this damage process have not been fully established yet. This study investigated the possible correlations among head-neck junction damage level, implant design, material combination, and patient characteristics.

Total Knee Replacement in Young Patients: Survival and Causes of Revision in a Registry Population.

Background: The incidence of total knee replacements (TKRs) in young patients is increasing. Few reports described encouraging results and acceptable survival rates. However, many concerns still persist, in particular about the high rates of infection and aseptic loosening.

3rd generation alumina-on-alumina in modular hip prosthesis: 13 to 18 years follow-up results.

Introduction: Ceramic-on-ceramic (CoC) couplings are alternative bearings surfaces that have been reported to reduce osteolysis, wear debris and aseptic loosening compared to the use of polyethylene. Early experiences with ceramics had poor results, but they have led to many improvements in the manufacture and design of subsequent implants.

Methods: We analysed medical files of 300 CoC total hip arthroplasty (THA) with a modular neck performed during period 1995-2000 by a single surgeon for a minimum follow-up of 13 years, evaluating clinical and radiological outcome.

Hypoxia mediates osteocyte ORP150 expression and cell death in vitro.

Skeletal unloading leads to hypoxia in the bone microenvironment, resulting in imbalanced bone remodeling that favors bone resorption. Osteocytes, the mechanosensors of bone, have been demonstrated to orchestrate bone homeostasis. Hypoxic osteocytes either undergo apoptosis or actively stimulate osteoclasts to remove bone matrix during hypoxia.

In vivo response of heme-oxygenase-1 to metal ions released from metal-on-metal hip prostheses.

Metal ion release and accumulation is considered to be a factor responsible for the high failure rates of metal-on-metal (MoM) hip implants. Numerous studies have associated the presence of these ions, besides other factors, including a hypoxia‑like response and changes in pH due to metal corrosion leading to the induction of the oxidative stress response. The aim of the present study was to verify whether, in patients with a MoM hip prosthesis, mRNA and protein expression of HMOX‑1 was modulated by the presence of metal ions and whether patients without prostheses exhibit a different expression pattern of this enzyme.

International comparative evaluation of knee replacement with fixed or mobile-bearing posterior-stabilized prostheses.

Background: Posterior-stabilized total knee prostheses were introduced to address instability secondary to loss of posterior cruciate ligament function, and they have either fixed or mobile bearings. Mobile bearings were developed to improve the function and longevity of total knee prostheses. In this study, the International Consortium of Orthopaedic Registries used a distributed health data network to study a large cohort of posterior-stabilized prostheses to determine if the outcome of a posterior-stabilized total knee prosthesis differs depending on whether it has a fixed or mobile-bearing design.

International comparative evaluation of knee replacement with fixed or mobile non-posterior-stabilized implants.

Background: Mobile-bearing total knee prostheses were designed to reduce wear and improve implant survivorship following total knee arthroplasty. However, the benefit of mobile-bearing total knee arthroplasty remains unproven. Both mobile-bearing and fixed-bearing total knee arthroplasty implants are available in posterior-stabilized and non-posterior-stabilized designs.