Surface-Functionalized Conducting Nanofibers for Electrically Stimulated Neural Cell Function.

Strategies involving the inclusion of cell-instructive chemical and topographical cues to smart biomaterials in combination with a suitable physical stimulus may be beneficial to enhance nerve-regeneration rate. In this regard, we investigated the surface functionalization of poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV)-based electroconductive electrospun nanofibers coupled with externally applied electrical stimulus for accelerated neuronal growth potential. In addition, the voltage-dependent conductive mechanism of the nanofibers was studied in depth to interlink intrinsic conductive properties with electrically stimulated neuronal expressions.

Amine-Functionalized Electrically Conductive Core-Sheath MEH-PPV:PCL Electrospun Nanofibers for Enhanced Cell-Biomaterial Interactions.

In the present study, a conducting polymer, poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) along with a biodegradable polymer poly(ε-caprolactone) (PCL) was used to prepare an electrically conductive, biocompatible, bioactive, and biodegradable nanofibrous scaffold for possible use in neural tissue engineering applications. Core-sheath electrospun nanofibers of PCL as the core and MEH-PPV as the sheath, were surface-functionalized with (3-aminopropyl) triethoxysilane (APTES) and 1,6-hexanediamine to obtain amine-functionalized surface to facilitate cell-biomaterial interactions with the aim of replacing the costly biomolecules such as collagen, fibronectin, laminin, and arginyl-glycyl-aspartic acid (RGD) peptide for surface modification. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) confirmed the formation of core-sheath morphology of the electrospun nanofibers, whereas Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) revealed successful incorporation of amine functionality after surface functionalization.

Electrically conductive MEH-PPV:PCL electrospun nanofibres for electrical stimulation of rat PC12 pheochromocytoma cells.

The purpose of this study was to prepare an electrically conducting poly[2-methoxy-5-(2-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV) based nanofibrous scaffold and to investigate the synergetic effect of nanofibre structure and electrical stimulation on neuronal growth for possible use in nerve repair. Nanofibres were produced by electrospinning of blended MEH-PPV with polycaprolactone (PCL) at a ratio of 20 : 80, 40 : 60, 50 : 50 and 60 : 40 (v/v). A better electrical conductivity was achieved by using core-sheath structured nanofibres of PCL (core) and MEH-PPV (sheath) produced using the coaxial electrospinning technique.

A haemocompatible and scalable nanoporous adsorbent monolith synthesised using a novel lignin binder route to augment the adsorption of poorly removed uraemic toxins in haemodialysis.

Nanoporous adsorbents are promising materials to augment the efficacy of haemodialysis for the treatment of end stage renal disease where mortality rates remain unacceptably high despite improvements in membrane technology. Complications are linked in part to inefficient removal of protein bound and high molecular weight uraemic toxins including key marker molecules albumin bound indoxyl sulphate (IS) and p-cresyl sulphate (PCS) and large inflammatory cytokines such as IL-6. The following study describes the assessment of a nanoporous activated carbon monolith produced using a novel binder synthesis route for scale up as an in line device to augment haemodialysis through adsorption of these toxins.

Nano carriers for drug transport across the blood-brain barrier.

Effective therapy lies in achieving a therapeutic amount of drug to the proper site in the body and then maintaining the desired drug concentration for a sufficient time interval to be clinically effective for treatment. The blood-brain barrier (BBB) hinders most drugs from entering the central nervous system (CNS) from the blood stream, leading to the difficulty of delivering drugs to the brain via the circulatory system for the treatment, diagnosis and prevention of brain diseases. Several brain drug delivery approaches have been developed, such as intracerebral and intracerebroventricular administration, intranasal delivery and blood-to-brain delivery, as a result of transient BBB disruption induced by biological, chemical or physical stimuli such as zonula occludens toxin, mannitol, magnetic heating and ultrasound, but these approaches showed disadvantages of being dangerous, high cost and unsuitability for most brain diseases and drugs.

Affinity binding of antibodies to supermacroporous cryogel adsorbents with immobilized protein A for removal of anthrax toxin protective antigen.

Polymeric cryogels are efficient carriers for the immobilization of biomolecules because of their unique macroporous structure, permeability, mechanical stability and different surface chemical functionalities. The aim of the study was to demonstrate the potential use of macroporous monolithic cryogels for biotoxin removal using anthrax toxin protective antigen (PA), the central cell-binding component of the anthrax exotoxins, and covalent immobilization of monoclonal antibodies. The affinity ligand (protein A) was chemically coupled to the reactive hydroxyl and epoxy-derivatized monolithic cryogels and the binding efficiencies of protein A, monoclonal antibodies to the cryogel column were determined.

An adsorbent monolith device to augment the removal of uraemic toxins during haemodialysis.

Adsorbents designed with porosity which allows the removal of protein bound and high molecular weight uraemic toxins may improve the effectiveness of haemodialysis treatment of chronic kidney disease (CKD). A nanoporous activated carbon monolith prototype designed for direct blood contact was first assessed for its capacity to remove albumin bound marker toxins indoxyl sulphate (IS), p-cresyl sulphate (p-CS) and high molecular weight cytokine interleukin-6 in spiked healthy donor studies. Haemodialysis patient blood samples were then used to measure the presence of these markers in pre- and post-dialysis blood and their removal by adsorbent recirculation of post-dialysis blood samples.

Nanoporous activated carbon beads and monolithic columns as effective hemoadsorbents for inflammatory cytokines.

The aim of the present study was to develop and investigate nanoporous activated carbon materials for their ability to adsorb inflammatory cytokines directly from blood, for a range of therapeutic applications, including: systemic inflammatory response syndrome (SIRS) related to sepsis, cardio-pulmonary by-pass surgery, or ischemic reperfusion injury. Building on the previously established relationship between the porous structure of beaded polymer-derived activated carbon and its capacity to adsorb inflammatory molecules, we have developed and characterized monolithic porous carbon columns produced from the same polymer precursor matrix as carbon microbeads. The monolithic columns developed were assessed for their ability to adsorb inflammatory molecules from blood in a circulating system.

Composites with macroporous poly(vinyl alcohol) cryogels with attached activated carbon microparticles with controlled accessibility of a surface.

A set of glutaraldehyde (GA) cross-linked poly(vinyl alcohol)/activated carbon (PVA/GA/AC) composites prepared in the form of monolithic rods using a cryogelation technique and studied using adsorption, mercury porosimetry, scanning electron microscopy (SEM), and quantum chemistry methods display porosity similar to that of PVA/GA cryogel at a high GA content (content ratio GA/AC = 1 and GA/PVA = 0.2). GA cross-linked PVA multilayer coverage is an effective barrier for adsorption on AC particles.

Activation-dependent adsorption of cytokines and toxins related to liver failure to carbon beads.

In the course of severe pathological conditions, such as acute liver failure and sepsis, toxic metabolites and mediators of inflammation are released into the patient's circulation. One option for the supportive treatment of these conditions is plasmapheresis, in which plasma, after being separated from the cellular components of the blood, is cleansed by adsorption of harmful molecules on polymers or activated carbon. In this work, the adsorption characteristics of activated carbon beads with levels of activation ranging from 0 to 86% were assessed for both hydrophobic compounds accumulating in liver failure (bilirubin, cholic acid, phenol and tryptophan) and cytokines (tumor necrosis factor α and interleukin-6).

Adsorption of anionic and cationic dyes by activated carbons, PVA hydrogels, and PVA/AC composite.

The textural and adsorption characteristics of a series of activated carbons (ACs), porous poly(vinyl alcohol) (PVA) gels, and PVA/AC composites were studied using scanning electron microscopy, mercury porosimetry, adsorption of nitrogen (at 77.4 K), cationic methylene blue (MB), anionic methyl orange (MO), and Congo red (CR) from the aqueous solutions. Dye-PVA-AC-water interactions were modeled using the semiempirical quantum chemical method PM6.

The in vitro corneal biocompatibility of hydroxyapatite-coated carbon mesh.

The purpose of this study was to consider the use of a hydroxyapatite (HA) coated porous carbon matrix as a synthetic dental laminate substitute in osteo-odonto-keratoprosthetic (OOKP) design. 3 types of carbon meshes were coated with HA by sonoelectrochemical deposition. The materials were characterised by scanning electron microscopy (SEM) and HA deposition was characterised by elemental analysis and X-ray diffractometry (XRD).

Inflammatory cytokine removal by an activated carbon device in a flowing system.

A prototype in-line filtration/adsorption device has been developed using novel synthetic pyrolysed carbon monoliths with controlled mesoporous domains of 2-50nm. Porosity was characterized by SEM and porosimetry. Removal of inflammatory cytokines TNF, IL-6, IL-1beta and IL-8 was assessed by filtering cytokine spiked human plasma through the walls of the carbon modules under pressure.

Polymeric hydrogels for novel contact lens-based ophthalmic drug delivery systems: a review.

Only about 5% of drugs administrated by eye drops are bioavailable, and currently eye drops account for more than 90% of all ophthalmic formulations. The bioavailability of ophthalmic drugs can be improved by a soft contact lens-based ophthalmic drug delivery system. Several polymeric hydrogels have been investigated for soft contact lens-based ophthalmic drug delivery systems: (i) polymeric hydrogels for conventional contact lens to absorb and release ophthalmic drugs; (ii) polymeric hydrogels for piggyback contact lens combining with a drug plate or drug solution; (iii) surface-modified polymeric hydrogels to immobilize drugs on the surface of contact lenses; (iv) polymeric hydrogels for inclusion of drugs in a colloidal structure dispersed in the lens; (v) ion ligand-containing polymeric hydrogels; (vi) molecularly imprinted polymeric hydrogels which provide the contact lens with a high affinity and selectivity for a given drug.

Mesoporous carbide-derived carbon with porosity tuned for efficient adsorption of cytokines.

Porous carbons can be used for the purification of various bio-fluids, including the cleansing blood of inflammatory mediators in conditions such as sepsis or auto-immune diseases. Here we show that the control of pore size in carbons is a key factor to achieving efficient removal of cytokines. In particular, the surface area accessible by the protein governs the rate and effectiveness of the adsorption process.

The in vitro adsorption of cytokines by polymer-pyrolysed carbon.

This study investigated a range of phenol-formaldehyde-aniline-based pyrolysed carbon matrices and their component materials, for their ability to adsorb a range of inflammatory cytokines crucial to the progression of sepsis. The efficiency of adsorption of the target molecules from human plasma was assessed and compared to that of Adsorba 300C, a commercially available cellulose-coated activated charcoal. Results indicate that a number of the primary carbon/resin materials demonstrate efficient adsorption of the cytokines studied here (TNF, IL-6 and IL-8), comparable to other adsorbents under clinical investigation.

Assessing the in vitro biocompatibility of a novel carbon device for the treatment of sepsis.

The aim of the present study was to conduct a preliminary investigation into the blood biocompatibility of a novel, uncoated carbon for use in a filtration/adsorption device for the treatment of sepsis. Carbon well prototypes were manufactured from phenol-formaldehyde-aniline-based pyrolysed carbons using monolithic polymer technology. Inflammatory blood cell and plasma protein mediation of the inflammatory response were evaluated using the novel carbon prototypes and compared with dialyser membrane and tissue culture plate controls.