Effective enzyme activity: A proposed monitoring methodology for biofiltration systems with or without ozone.

"Effective Enzyme Activity", or simply "Effective Activity", is proposed as a biofiltration monitoring tool which combines enzyme activity with empty bed contact time (EBCT) to quantify biodegradation potential. The primary objective of this study was to evaluate the applicability of the Effective Activity concept for predicting water quality in biofiltration systems. This pilot-scale study evaluated eight different biofilter configurations in order to quantify impacts associated with filter media (anthracite/sand or granular activated carbon), pre-treatment (settled water with or without ozonation) and operating conditions (15- and 30-min EBCT, and backwash with or without chlorine).

Impact of backwash on biofiltration-related nitrogenous disinfection by-product formation.

Previous studies have reported that biofilm extracted from full-scale biofilters can serve as nitrogenous disinfection by-product (N-DBP) precursors. Detached biofilm materials could escape during filter ripening and form N-DBP upon chloramination. This study examined the potential breakthrough of biofilm and N-DBP precursors during filter ripening at two water treatment plants (WTPs).

The contribution of biofilm to nitrogenous disinfection by-product formation in full-scale cyclically-operated drinking water biofilters.

Biofiltration has been shown to be effective for disinfection by-product (DBP) precursor control, however few studies have considered its role in the potential formation of DBPs. Biofilm is composed of heterogeneous bacteria as well as extracellular polymeric substances (EPS). The objective of this study was to determine the contribution of biofilm-related materials such as EPS to form nitrogen-containing DBPs upon chloramination, and to determine the influence of cyclical (scheduled on-off) biofilter operation on DBP precursor removal.

Pilot-scale comparison of cyclically and continuously operated drinking water biofilters: Evaluation of biomass, biological activity and treated water quality.

The objective of this pilot study was to evaluate the impact of cyclical (operated 8-12 h per day) and continuous biofilter operation with respect to biomass development, biological enzyme activity and treated water quality (in terms of organics, nutrients and disinfection by-product (DBP) formation potential). Continuously operated biofilters developed greater densities of biomass, as measured by ATP, when compared to cyclically operated filters; reducing the empty bed contact time (EBCT) increased biomass density under continuous flow conditions. However, once normalized to biomass, it was shown that cyclically operated filters exhibited higher enzyme activity, indicating that this method of operation may improve bacterial function.

Removal of natural organic matter and disinfection byproduct precursors from drinking water using photocatalytically regenerable nanoscale adsorbents.

Disinfection byproduct precursors (DBPs) were removed from raw surface water obtained from two Canadian drinking water treatment plants via adsorption to two regenerable linear engineered TiO nanomaterials (LENs). The temperature employed in the final heating step of the LEN synthesis procedure was varied to produce two distinct nanomaterials, NB 550 and NB 700. The LENs had similar dimensions but differed in terms of surface characteristics, surface area, and crystal structure.

Modeling the exposure of wild fish to endocrine active chemicals: Potential linkages of total estrogenicity to field-observed intersex.

Decades of studies on endocrine disruption have suggested the need to manage the release of key estrogens from municipal wastewater treatment plants (WWTP). However, the proposed thresholds are below the detection limits of most routine chemical analysis, thereby restricting the ability of watershed managers to assess the environmental exposure appropriately. In this study, we demonstrated the utility of a mechanistic model to address the data gaps on estrogen exposure.

Multi-year prediction of estrogenicity in municipal wastewater effluents.

In this study, the estrogenicity of two major wastewater treatment plant (WWTP) effluents located in the central reaches of the Grand River watershed in southern Ontario was estimated using population demographics, excretion rates, and treatment plant-specific removals. Due to the lack of data on estrogen concentrations from direct measurements at WWTPs, the treatment efficiencies through the plants were estimated using the information obtained from an effects-directed analysis. The results show that this approach could effectively estimate the estrogenicity of WWTP effluents, both before and after major infrastructure upgrades were made at the Kitchener WWTP.

Adsorption of natural organic matter and disinfection byproduct precursors from surface water onto TiO nanoparticles: pH effects, isotherm modelling and implications for using TiO for drinking water treatment.

Titanium dioxide is a photocatalyst that can remove organic contaminants of interest to the drinking water treatment industry, including natural organic matter (NOM) and disinfection byproduct (DBP) precursors. The photocatalytic reaction occurs in two steps: adsorption of the contaminant followed by degradation of the adsorbed contaminant upon irradiation with UV light. The second part of this process can lead to the formation of reactive intermediates and negative impacts on treated water quality, such as increased DBP formation potential (DBPfp).

Comments on a Method to Measure Sucralose Using UV Photodegradation Followed by UV Spectrophotometry.

A simple and quick method to measure sucralose in aqueous solution at concentrations in the order of 0.1-1.2 g·L-1 proposed by Idris et al.

Photocatalytic decomposition of selected estrogens and their estrogenic activity by UV-LED irradiated TiO2 immobilized on porous titanium sheets via thermal-chemical oxidation.

The removal of endocrine disrupting compounds (EDCs) remains a big challenge in water treatment. Risks associated with these compounds are not clearly defined and it is important that the water industry has additional options to increase the resiliency of water treatment systems. Titanium dioxide (TiO2) has potential applications for the removal of EDCs from water.

Photocatalytic decomposition of organic micropollutants using immobilized TiO2 having different isoelectric points.

Organic micropollutants found in the environment are a diverse group of compounds that includes pharmaceuticals, personal care products, and endocrine disruptors. Their presence in the aquatic environment continues to be a concern as the risk they pose towards both the environment and human health is still inconclusive. Removal of these compounds from water and wastewater is difficult to achieve and often incomplete, but UV-TiO2 is a promising treatment approach.

Fluorescence spectroscopy for monitoring reduction of natural organic matter and halogenated furanone precursors by biofiltration.

The application of fluorescence spectroscopy to monitor natural organic matter (NOM) reduction as a function of biofiltration performance was investigated. This study was conducted at pilot-scale where a conventional media filter was compared to six biofilters employing varying enhancement strategies. Overall reductions of NOM were identified by measuring dissolved organic carbon (DOC), and UV absorbance at 254 nm, as well as characterization of organic sub-fractions by liquid chromatography-organic carbon detection (LC-OCD) and parallel factors analysis (PARAFAC) of fluorescence excitation-emission matrices (FEEM).

Rejection of pharmaceutically-based N-nitrosodimethylamine precursors using nanofiltration.

N-Nitrosodimethylamine (NDMA) is a disinfection by-product (DBP) with many known precursors such as amine-containing pharmaceuticals that can enter the environment via treated wastewater. Reverse osmosis and tight nanofiltration membranes (MW cutoff < 200 Da) are treatment technologies that demonstrate high removal of many compounds, but at relatively high energy costs. Looser membranes (>200 Da) may provide sufficient removal of a wide range of contaminants with lower energy costs.

Conventional drinking water treatment and direct biofiltration for the removal of pharmaceuticals and artificial sweeteners: A pilot-scale approach.

The presence of endocrine disrupting compounds (EDCs), pharmaceutically active compounds (PhACs) and artificial sweeteners are of concern to water providers because they may be incompletely removed by wastewater treatment processes and they pose an unknown risk to consumers due to long-term consumption of low concentrations of these compounds. This study utilized pilot-scale conventional and biological drinking water treatment processes to assess the removal of nine PhACs and EDCs, and two artificial sweeteners. Conventional treatment (coagulation, flocculation, settling, non-biological dual-media filtration) was compared to biofilters with or without the addition of in-line coagulant (0.

Engineered biofiltration for the removal of disinfection by-product precursors and genotoxicity.

Disinfection by-products (DBPs) are formed when naturally occurring organic matter reacts with chlorine used in drinking water treatment, and DBPs formed in chlorinated drinking water samples have been shown to cause a genotoxic response. The objective of the current study was to further understand the principles of biofiltration and the resulting impacts on the formation of DBPs and genotoxicity. Pilot-scale systems were utilized to assess the performance of engineered biofilters enhanced with hydrogen peroxide, in-line coagulants, and nutrients when compared to passively operated biofilters and conventional treatment (coagulation, flocculation, sedimentation, non-biological filtration).

UV/chlorine control of drinking water taste and odour at pilot and full-scale.

Advanced oxidation processes (AOPs) can be used to destroy taste and odour-causing compounds in drinking water. This work investigated both pilot- and full-scale performance of the novel ultraviolet (UV)/chlorine AOP for the destruction of geosmin, 2-methylisoborneol (MIB) and caffeine (as a surrogate) in two different surface waters. The efficiency of the UV/chlorine process at pH 7.

Formation of disinfection by-products in the ultraviolet/chlorine advanced oxidation process.

Disinfection by-product (DBP) formation may be a concern when applying ultraviolet light and free chlorine (UV/chlorine) as an advanced oxidation process (AOP) for drinking water treatment, due to typically large chlorine doses (e.g. 5-10 mg L(-1) as free chlorine).

Effects of coagulation on the removal of natural organic matter, genotoxicity, and precursors to halogenated furanones.

Natural organic matter (NOM) in drinking water can react with disinfectants to form disinfection by-products (DBPs). Halogenated furanones are a group of emerging DBPs that can account for 20-60% of the total mutagenicity observed in drinking water. This study examined the impacts of bench-scale coagulation and subsequent chlorination on DBP formation as well as genotoxicity using three source waters located in Ontario, Canada.

Factors affecting catalysis of copper corrosion products in NDMA formation from DMA in simulated premise plumbing.

This study investigated the effects of corrosion products of copper, a metal commonly employed in household plumbing systems, on N-nitrosodimethylamine (NDMA) formation from a known NDMA precursor, dimethylamine (DMA). Copper-catalyzed NDMA formation increased with increasing copper concentrations, DMA concentrations, alkalinity and hardness, but decreased with increasing natural organic matter (NOM) concentration. pH influenced the speciation of chloramine and the interactions of copper with DMA.

NDMA formation from amine-based pharmaceuticals--impact from prechlorination and water matrix.

The presence of N-nitrosodimethylamine (NDMA) in drinking water is most commonly associated with the chloramination of amine-based precursors. One option to control the NDMA formation is to remove the precursors via pre-oxidation, and prechlorination is among the most effective options in reducing NDMA formation. However, most of the findings to-date are based on single-precursor scenarios using the model precursor dimethylamine (DMA) and natural organic matter (NOM), while few studies have considered the potential interactions between water matrix components and the target precursors when investigating the prechlorination impact.

Formation of NDMA from ranitidine and sumatriptan: the role of pH.

N-nitrosodimethylamine (NDMA) is an emerging disinfection by-product (DBP) which can be formed via the chloramination of amine-based precursors. The formation of NDMA is mainly determined by the speciation of chloramines and the precursor amine groups, both of which are highly dependent on pH. The impact of pH on NDMA formation has been studied for the model precursor dimethylamine (DMA) and natural organic matter (NOM), but little is known for amine-based pharmaceuticals which have been newly identified as a group of potential NDMA precursors, especially in waters impacted by treated wastewater effluents.

Catalysis of copper corrosion products on chlorine decay and HAA formation in simulated distribution systems.

This study investigated the effect of copper corrosion products, including Cu(II), Cu(2)O, CuO and Cu(2)(OH)(2)CO(3), on chlorine degradation, HAA formation, and HAA speciation under controlled experimental conditions. Chlorine decay and HAA formation were significantly enhanced in the presence of copper with the extent of copper catalysis being affected by the solution pH and the concentration of copper corrosion products. Accelerated chlorine decay and increased HAA formation were observed at pH 8.

NDMA formation kinetics from three pharmaceuticals in four water matrices.

N, N-nitrosodimethylamine (NDMA) is an emerging disinfection by-product (DBP) that has been widely detected in many drinking water systems and commonly associated with the chloramine disinfection process. Some amine-based pharmaceuticals have been demonstrated to form NDMA during chloramination, but studies regarding the reaction kinetics are largely lacking. This study investigates the NDMA formation kinetics from ranitidine, chlorphenamine, and doxylamine under practical chloramine disinfection conditions.

Demonstration of 20 pharmaceuticals and personal care products (PPCPs) as nitrosamine precursors during chloramine disinfection.

The worldwide detection of pharmaceuticals and personal care products (PPCPs) in the aquatic environment and drinking water has been a cause for concern in recent years. The possibility for concurrent formation of nitrosamine DBPs (disinfection by-products) during chloramine disinfection has become another significant concern for delivered drinking water quality because of their potent carcinogenicity. This study demonstrates that a group of PPCPs containing amine groups can serve as nitrosamine precursors during chloramine disinfection.

Disinfection effectiveness of organic chloramines, investigating the effect of pH.

The disinfection effectiveness of three organic N-chloramines (chlorinated amino acids and peptides) on the bacteria Escherichia coli (E. coli) was investigated, including a more detailed study into the pH dependency of the disinfection effectiveness of N-chloroglycine. The organic N-chloramines were prepared by combining sodium hypochlorite with each amino acid or peptide (glycine, Ala-Ala and Arg-Gly-Asp-Ser), at a N:Cl molar ratio of 1:0.