A core-shell microneedle system for stable fibroblast delivery in cell-based therapies.

Human cells, such as fibroblasts and particularly human mesenchymal stem cells (hMSCs), represent a promising and effective therapeutic tool for a range of cell-based therapies used to treat various diseases. The effective delivery of therapeutic cells remains a challenge due to limitations in targeting, invasiveness, and cell viability. To address these challenges, we developed a microneedle (MN) system for minimally invasive cell delivery with high cellular stability.

Highly Multiplexed Immunofluorescence PhenoCycler Panel for Murine Formalin-Fixed Paraffin-Embedded Tissues Yields Insight Into Tumor Microenvironment Immunoengineering.

Spatial proteomics profiling is an emerging set of technologies that has the potential to elucidate the cell types, interactions, and molecular signatures that make up complex tissue microenvironments, with applications in the study of cancer, immunity, and much more. An emerging technique in the field is CoDetection by indEXing, recently renamed as the PhenoCycler system. This is a highly multiplexed immunofluorescence imaging technology that relies on oligonucleotide-barcoded antibodies and cyclic immunofluorescence to visualize many antibody markers in a single specimen while preserving tissue architecture.

Targeted Liposomal Co-delivery of an Immunogenic Cell Death Inducer and a Toll-Like Receptor 4 Agonist for Enhanced Cancer Chemo-immunotherapy.

Anticancer chemo-immunotherapy has gained considerable attention across various scientific domains as a prospective approach for the comprehensive eradication of malignant tumors. Recent research has particularly been focused on traditional anthracycline chemo drugs, such as doxorubicin and mitoxantrone. These compounds trigger apoptosis in tumor cells and evoke immunogenic cell death (ICD).

Enhancing the Therapeutic Efficacy of GLP-1 for Hyperglycemia Treatment: Overcoming Barriers of Oral Gene Therapy with Taurocholic Acid-Conjugated Protamine Sulfate and Calcium Phosphate.

Activating the glucagon-like peptide-1 (GLP-1) receptor by oral nucleic acid delivery would be a promising treatment strategy against hyperglycemia due to its various therapeutic actions. However, GLP-1 receptor agonists are effective only in subcutaneous injections because they face multiple barriers due to harsh gastrointestinal tract (GIT) conditions before reaching the site of action. The apical sodium bile acid transporter (ASBT) pathway at the intestinal site could be an attractive target to overcome the problem.

Extracellular vesicles and exosome-like nanovesicles as pioneering oral drug delivery systems.

As extracellular vesicle (EV)-based nanotechnology has developed rapidly, it has made unprecedented opportunities for nanomedicine possible. EVs and exosome-like nanovesicles (ELNVs) are natural nanocarriers with unique structural, compositional, and morphological characteristics that provide excellent physical, chemical, and biochemical properties. In this literature, we examine the characteristics of EVs, including how they are administered orally and their therapeutic activity.

Evaluation of Influence of Incisal Guidance on the Force Exerted at the Maximum Possible Intercuspal Position and in Protrusion - An Study.

Aim: Incisal guidance (IG) varies with maxillary and mandibular teeth wear. It in turn governs the forces on adhesive restorations. The present study evaluates the variation in forces because of changes in IG.

Carbon-based nanostructures for cancer therapy and drug delivery applications.

Synthesis, design, characterization, and application of carbon-based nanostructures (CBNSs) as drug carriers have attracted a great deal of interest over the past half of the century because of their promising chemical, thermal, physical, optical, mechanical, and electrical properties and their structural diversity. CBNSs are well-known in drug delivery applications due to their unique features such as easy cellular uptake, high drug loading ability, and thermal ablation. CBNSs, including carbon nanotubes, fullerenes, nanodiamond, graphene, and carbon quantum dots have been quite broadly examined for drug delivery systems.

Carbon Nanotube and Its Derived Nanomaterials Based High Performance Biosensing Platform.

After the COVID-19 pandemic, the development of an accurate diagnosis and monitoring of diseases became a more important issue. In order to fabricate high-performance and sensitive biosensors, many researchers and scientists have used many kinds of nanomaterials such as metal nanoparticles (NPs), metal oxide NPs, quantum dots (QDs), and carbon nanomaterials including graphene and carbon nanotubes (CNTs). Among them, CNTs have been considered important biosensing channel candidates due to their excellent physical properties such as high electrical conductivity, strong mechanical properties, plasmonic properties, and so on.

Engineered Nanoparticles inside a Microparticle Oral System for Enhanced Mucosal and Systemic Immunity.

Antigen delivery through an oral route requires overcoming multiple challenges, including gastrointestinal enzymes, mucus, and epithelial tight junctions. Although each barrier has a crucial role in determining the final efficiency of the oral vaccination, transcytosis of antigens through follicle-associated epithelium (FAE) represents a major challenge. Most of the research is focused on delivering an antigen to the M-cell for FAE transcytosis because M-cells can easily transport the antigen from the luminal site.

Enhancing In Vitro Stability of Albumin Microbubbles Produced Using Microfluidic T-Junction Device.

Microfluidics is an efficient technique for continuous synthesis of monodispersed microbubbles. However, microbubbles produced using microfluidic devices possess lower stability due to quick dissolution of core gas when exposed to an aqueous environment. This work aims at generating highly stable monodispersed albumin microbubbles using microfluidic T-junction devices.

Plasmid DNA Nanoparticles for Nonviral Oral Gene Therapy.

Herein, a bile acid-inspired triple padlock oral gene delivery platform is developed, facilitating the protection of the therapeutic gene from gastrointestinal degradation, selective intestinal accumulation through a bile acid-specific transporter, and transportation of pDNA NPs through the enterohepatic recycling system. This nonviral oral gene delivery nanoparticle exhibits excellent gene expression kinetics in , , and studies. A single oral dose leads to maintaining normoglycemia for up to 7 days in three different diabetes mouse models and 14 days in diabetic monkeys.

Effectiveness of Oil-Layered Albumin Microbubbles Produced Using Microfluidic T-Junctions in Series for In Vitro Inhibition of Tumor Cells.

This work focuses on the synthesis of oil-layered microbubbles using two microfluidic T-junctions in series and evaluation of the effectiveness of these microbubbles loaded with doxorubicin and curcumin for cell invasion arrest from 3D spheroid models of triple negative breast cancer (TNBC), MDA-MB-231 cell line. Albumin microbubbles coated in the drug-laden oil layer were synthesized using a new method of connecting two microfluidic T-mixers in series. Double-layered microbubbles thus produced consist of an innermost core of nitrogen gas encapsulated in an aqueous layer of bovine serum albumin (BSA) which in turn, is coated with an outer layer of silicone oil.

Self-gelling electroactive hydrogels based on chitosan-aniline oligomers/agarose for neural tissue engineering with on-demand drug release.

Designing biomimetic scaffolds is an intellectual challenge of the realm of regenerative medicine and tissue engineering. An electroactive substrate should meet multidisciplinary mimicking the mechanical, electrical, and electrochemical properties of neural tissues. Hydrogels have been known platforms to regulate neural interface modulus, but the lack of conductivity always hampered their applications; hence, developing conductive hydrogels with on-demand drug release has become a concern of tissue engineering.

Modification of porous polyethylene scaffolds for cell attachment and proliferation.

Synthetic polymers are widely researched for their use in tissue engineering. Control in size, surface area, pore size, and elasticity are the biggest advantages of using a man-made polymer. However, often the polymers are hydrophobic (do not encourage cell attachment); hence, it is hugely challenging to integrate them with the normal tissues.

Tailoring the properties of mPEG-PLLA nanoparticles for better encapsulation and tuned release of the hydrophilic anticancer drug.

Gemcitabine is used as a first-line drug for treating many solid tumours. However, it suffers from a major drawback of strong side effects and short plasma half-life because of degradation by enzyme when administered intravenously. Polyesters and copolyesters are the most widely used and preferred class of biodegradable polymer.

Interaction of small molecules with fungal laccase: A Surface Plasmon Resonance based study.

Laccases have a great potential for use in industrial and biotechnological applications. It has affinity towards phenolics and finds major applications in the field of bioremediation. Here, Surface Plasmon Resonance (SPR) as a biosensor with immobilized laccase on chip surface has been studied.

Polymer incorporation method affects the physical stability of amorphous indomethacin in aqueous suspension.

This study reports the potential of different polymers and polymer incorporation methods to inhibit crystallisation and maintain supersaturation of amorphous indomethacin (IND) in aqueous suspensions during storage. Three different polymers (poly(vinyl pyrrolidone) (PVP), hydroxypropyl methylcellulose (HPMC) and Soluplus® (SP)) were used and included in the suspensions either as a solid dispersion (SD) with IND or dissolved in the suspension medium prior to the addition of amorphous IND. The total concentrations of both IND and the polymer in the suspensions were kept the same for both methods of polymer incorporation.

Synthesis, characterization of thiolated karaya gum and evaluation of effect of pH on its mucoadhesive and sustained release properties.

Present study aims at synthesis and characterization of thiolated gum karaya by reacting karaya gum with 80% thioglycolic acid resulting in esterification and immobilization of thiol groups on polymeric backbone. Immobilized thiol groups were found to be 5.026 mM/g determined by Ellman's method.

Evaluation of Various Factors Affecting Bioconversion of l-Tyrosine to l-DOPA by Yeast Yarrowia lipolytica-NCIM 3450 Using Response Surface Methodology.

3,4-Dihydroxy l-phenylalanine (l-DOPA) is considered a potent drug for the treatment of Parkinson disease. Physical and nutritional parameters where optimized by using Yarrowia lipolytica-NCIM 3450 to accomplished the highest production of l-DOPA. Screenings of critical components were completed by using a Plackett-Burman design, while further optimization was carried out using the Box-Behnken design.

Optimization of Biotransformation of l-Tyrosine to l-DOPA by Yarrowia lipolytica-NCIM 3472 Using Response Surface Methodology.

l-DOPA (3,4-dihydroxyphenyl-l-alanine) is the most widely used drug for treatment of Parkinson's disease. In this study Yarrowia lipolytica-NCIM 3472 biomass was used for transformation of l-tyrosine to l-DOPA. The process parameters were optimized using response surface methodology (RSM).

Indomethacin: new polymorphs of an old drug.

This study reports the appearance and characterization of multiple new polymorphic forms of indomethacin. Considering the interest in amorphous suspensions for toxicology studies of poorly water-soluble drugs, we sought to investigate the crystallization behavior of amorphous indomethacin in aqueous suspension. Specifically, the effect of pH and temperature on crystallization behavior was studied.

A Cross Sectional Study on the Relationship Between the Body Mass Index (BMI) and the Audiovisual Reaction Time (ART).

Introduction: The reaction time is the time interval between the stimulus application and the proper response. The neurophysiological studies suggest a relationship of the BMI with the cognition, attention and the memory.

Aim: To study the relationship between the Body Mass Index (BMI) and the audiovisual reaction time in young healthy females.

Optimization of melanin production by Brevundimonas sp. SGJ using response surface methodology.

Melanins are predominantly indolic polymers which are extensively synthesized in animals, plants and microorganisms. It has wide applications in cosmetics, agriculture and medicine. In the present study, optimization of process parameters influencing melanin production was attempted using the response surface methodology (RSM) from Brevundimonas sp.

Statistically optimized biotransformation protocol for continuous production of L-DOPA using Mucuna monosperma callus culture.

L-DOPA (3,4-dihydroxyphenyl-L-alanine), a modified amino acid, is an expansively used drug for the Parkinson's disease treatment. In the present study, optimization of nutritional parameters influencing L-DOPA production was attempted using the response surface methodology (RSM) from Mucuna monosperma callus. Optimization of the four factors was carried out using the Box-Behnken design.