Folic Acid-Intercalated Mg/Al Layered Double Hydroxides-A Multifunctional Nanohybrid Delivery System for Topical Applications.

The delivery of active functional molecules across the skin is laborious due to its structural intricacy and exceptional barrier characteristics. Developments in nanotechnology yielded innovative transport vehicles derived from nanomaterials to reinforce the skin's ability to interact with active ingredient molecules and increase its bioavailability. The current study employed crystalline inorganic two-dimensional double hydroxides (LDHs) as an efficient carrier and delivery vehicle for folic acid (FA) in a topical skincare formulation.

Antitubercular Activity of 7-Methyljuglone-Loaded Poly-(Lactide Co-Glycolide) Nanoparticles.

Background/objectives: Loading of natural products into poly-(lactide-co-glycolic) acid (PLGA) nanoparticles as drug delivery systems for the treatment of diseases, such as tuberculosis (TB), has been widely explored. The current study investigated the use of PLGA nanoparticles with 7-methyljuglone (7-MJ), an active pure compound, isolated from the roots of A. DC.

Dual Antimicrobial Activity of HTCC and Its Nanoparticles: A Synergistic Approach for Antibacterial and Antiviral Applications Through Combined In Silico and In Vitro Studies.

N-(2-hydroxyl) propyl-3-trimethyl ammonium chitosan chloride (HTCC), a quaternized chitosan derivative, has been shown to exhibit a broad spectrum of antimicrobial activity, especially against bacteria and enveloped viruses. Despite this, molecular docking studies showing its atomic-level mechanisms against these microorganisms are scarce. Here, for the first time, we employed molecular docking analyses to investigate the potential antibacterial activity of HTCC against and its antiviral activity against human immunodeficiency virus 1 (HIV-1).

Extrusion pre-treatment of cowpea (Vigna unguiculata (L.) Walp.) lignocellulosic sidestream to produce cellulose fibres.

Background: Various agricultural sidestreams have been demonstrated as feedstock to produce cellulose. To the best of our knowledge, there is no research work on the potential of agricultural sidestream from cowpea (Vigna unguiculata (L.) Walp.

Nanocellulose-based conductive composites: A review of systems for electromagnetic interference shielding applications.

Electronic systems and telecommunications have grown in popularity, leading to increasing electromagnetic (EM) radiation pollution. Environmental protection from EM radiation demands the use of environmentally friendly products. The design of EM interference (EMI) shielding materials using resources like nanocellulose (NC) is gaining traction.

Effect of Graphene Oxide Localization on Morphology Development and Rheological and Mechanical Properties of Poly(lactic acid)/ethylene vinyl Alcohol Copolymer Blend Composites: A Comprehensive Study.

This study investigates the rheological, morphological, and mechanical properties of melt-processed polylactide/ethylene vinyl alcohol (70PLA/30EVOH) blend composites containing 0.25, 0.5, and 1 wt.

Evaluation of Lippia scaberrima Sond. and Aspalathus linearis (Burm.f.) R. Dahlgren extracts on human CYP enzymes and gold nanoparticle synthesis: implications for drug metabolism and cytotoxicity.

Background: Metabolism is an important component of the kinetic characteristics of herbal constituents, and it often determines the internal dose and concentration of these effective constituents at the target site. The metabolic profile of plant extracts and pure compounds need to be determined for any possible herb-drug metabolic interactions that might occur.

Methods: Various concentrations of the essential oil of Lippia scaberrima, the ethanolic extract of Lippia scaberrima alone and their combinations with fermented and unfermented Aspalathus linearis extract were used to determine the inhibitory potential on placental, microsomal and recombinant human hepatic Cytochrome P450 enzymes.

Stability, biofunctional, and antimicrobial characteristics of cannabidiol isolate for the design of topical formulations.

Cannabidiol (CBD) is a high-value natural compound of plant. It is a non-psychotropic phytocannabinoid, attracting significant attention as a multifunctional active ingredient for topical applications. Although it is demonstrated that CBD can be used for specific dermatological ailments, reliable data on functionalities are limited.

Antibacterial study of carbopol-mastic gum/silver nanoparticle-based topical gels with carvacrol/neem bark extract in vitro.

Background: Resistance to antimicrobial drugs as a result of prolonged use usually results in clinical failure, especially in wound infections. Development of effective antimicrobial therapeutics for the management of infected wounds from a natural source with improved therapeutic effects is a pressing need.

Objective: In this study, carbopol-mastic gum-based topical gels were loaded with silver nanoparticles in combination with either neem bark extract or carvacrol oil.

Recent Advances and Outlook in 2D Nanomaterial-Based Flame-Retardant PLA Materials.

Poly (lactic acid) or polylactide (PLA) has gained widespread use in many industries and has become a commodity polymer. Its potential as a perfect replacement for petrochemically made plastics has been constrained by its extreme flammability and propensity to flow in a fire. Traditional flame-retardants (FRs), such as organo-halogen chemicals, can be added to PLA without significantly affecting the material's mechanical properties.

Integration of 3D Printing-Coelectrospinning: Concept Shifting in Biomedical Applications.

Porous structures with sizes between the submicrometer and nanometer scales can be produced using efficient and adaptable electrospinning technology. However, to approximate desirable structures, the construction lacks mechanical sophistication and conformance and requires three-dimensional solitary or multifunctional structures. The diversity of high-performance polymers and blends has enabled the creation of several porous structural conformations for applications in advanced materials science, particularly in biomedicine.

Role of Rheology in Morphology Development and Advanced Processing of Thermoplastic Polymer Materials: A Review.

This review presents fundamental knowledge and recent advances pertaining to research on the role of rheology in polymer processing, highlights the knowledge gap between the function of rheology in various processing operations and the importance of rheology in the development, characterization, and assessment of the morphologies of polymeric materials, and offers ideas for enhancing the processabilities of polymeric materials in advanced processing operations. Rheology plays a crucial role in the morphological evolution of polymer blends and composites, influencing the type of morphology in the case of blends and the quality of dispersion in the cases of both blends and composites. The rheological characteristics of multiphase polymeric materials provide valuable information on the morphologies of these materials, thereby rendering rheology an important tool for morphological assessment.

Prospects of 2D graphdiynes and their applications in desalination and wastewater remediation.

Water is an indispensable part of human life that affects health and food intake. Water pollution caused by rapid industrialization, agriculture, and other human activities affects humanity. Therefore, researchers are prudent and cautious regarding the use of novel materials and technologies for wastewater remediation.

Investigation of the Effects of Chain Extender on Material Properties of PLA/PCL and PLA/PEG Blends: Comparative Study between Polycaprolactone and Polyethylene Glycol.

This study investigated the effect of the Joncryl concentration on the properties of polylactide/poly(ε-caprolactone) (PLA/PCL) and PLA/poly(ethylene glycol) (PEG) blends. The addition of Joncryl influenced the properties of both PLA-based blends. In the blend of PLA/PCL blends, the addition of Joncryl reduced the size of PCL droplets, which implies the compatibility of the two phases, while PLA/PEG blends showed a co-continuous type of morphology at 0.

Application of Layered Double Hydroxides as a Slow-Release Phosphate Source: A Comparison of Hydroponic and Soil Systems.

The utilization of slow-release fertilizer materials capable of responding to their environment and releasing nutrient ions efficiently over a prolonged period is an emerging research area in agricultural materials sciences. In this study, two-dimensional layered materials were prepared to release phosphor ions (P) slowly into the soil as well as in the hydroponic system. Various P-intercalated layered double hydroxides (LDHs) (Mg/Al, Zn/Al, and Mg-Zn/Al-LDHs) with a molar ratio of 2:1 were synthesized using an ion-exchange method from corresponding LDHs containing NO ions within the layers.

Supersensitive metal free in-situ synthesized graphene oxide@cellulose nanocrystals acetone sensitive bioderived sensors.

A series of graphene oxide@cellulose nanocrystal (GO@CNC) nanoparticles (NPs) were synthesized in this study using a room temperature-based simple modified hummers process. The morphological structures, as well as chemical characteristics of these materials, were characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD), and other techniques. The results show that the as-prepared nanoparticles are made up of crystallite grains with an average size of around 7.

Functional and Structural Facts of Effective Electromagnetic Interference Shielding Materials: A Review.

Electromagnetic interference (EMI) shielding effectiveness (SE) systems have received immense attention from researchers owing to the rapid development in electronics and telecommunications, which is an alarming matter in our modern society. This radiation can damage the performance of EM devices and may harmfully affect animal/human health. The harmonious utilization of magnetic alloys and conducting but nonmagnetic materials (such as carbon/graphene) is a practical approach toward EMI SE.

A Comparison of Nitrate Release from Zn/Al-, Mg/Al-, and Mg-Zn/Al Layered Double Hydroxides and Composite Beads: Utilization as Slow-Release Fertilizers.

Nitrate-loaded Zn/Al, Mg/Al, and Mg-Zn/Al layered double hydroxides (LDHs) were synthesized using the coprecipitation method. The slow-release properties of LDHs were measured in powder form at various pH conditions. Sodium alginate was used to encapsulate Mg/Al LDH to produce composite beads (LB) to further slow down the release of nitrate ions.

Polymer drug conjugates containing memantine, tacrine and cinnamic acid: promising nanotherapeutics for the treatment of Alzheimer's disease.

Aim: To prepare polymer-drug conjugates containing a combination of memantine, tacrine, and )--(3-aminopropyl)cinnamide, promising therapeutics for the treatment of neurodegenerative disorders.

Methods: The conjugates were characterised by HNMR, particle size analysis, SEM, LC-MS, TEM/EDX, and XRD, followed by anti-acetylcholinesterase and drug release studies.

Results: H NMR analysis revealed successful drug conjugation with drug mass percentages in the range of 1.

Numerical Investigation and Response Surface Optimization of the Effective Modulus and Electrical and Thermal Conductivities of the Borophene Nanoplatelet-Reinforced PEDOT:PSS Nanocomposite for Energy Storage Application.

Conductive organic nanocomposites have been widely employed to achieve a variety of purposes, particularly for energy storage applications, making it necessary to investigate transport properties such as electron and heat transport qualities based on geometric shapes and component materials. Due to the solid B-B bonds, unique atomic structure, and energy storage potential, borophene has received significant attention due to its reported ultrahigh mechanical modulus and metallic conduction. Herein, we investigated the effect and interaction of content materials (volume fraction) and geometric parameters such as the aspect ratio and orientation of borophene nanoplatelet (BNP) inclusions on the mechanical integrity and transport features (electrical and thermal conductivities) of a poly(3,4-ethylene dioxythiophene):poly(4-styrene sulfonate) (PEDOT:PSS) electrode.

Nanocellulosics in Transient Technology.

Envisage a world where discarded electrical/electronic devices and single-use consumables can dematerialize and lapse into the environment after the end-of-useful life without constituting health and environmental burdens. As available resources are consumed and human activities build up wastes, there is an urgency for the consolidation of efforts and strategies in meeting current materials needs while assuaging the concomitant negative impacts of conventional materials exploration, usage, and disposal. Hence, the emerging field of transient technology (Green Technology), rooted in eco-design and closing the material loop toward a friendlier and sustainable materials system, holds enormous possibilities for assuaging current challenges in materials usage and disposability.

Applications of MXene-Containing Polypyrrole Nanocomposites in Electrochemical Energy Storage and Conversion.

The atomically thick two-dimensional (2D) materials are at the forefront of revolutionary technologies for energy storage devices. Due to their fascinating physical and chemical features, these materials have gotten a lot of attention. They are particularly appealing for a wide range of applications, including electrochemical storage systems, due to their simplicity of property tuning.

Density Functional Theory Interaction Study of a Polyethylene Glycol-Based Nanocomposite with Cephalexin Drug for the Elimination of Wound Infection.

In this paper, density functional theory (DFT) simulations are used to evaluate the possible use of a graphene oxide-based poly(ethylene glycol) (GO/PEG) nanocomposite as a drug delivery substrate for cephalexin (CEX), an antibiotic drug employed to treat wound infection. First, the stable configuration of the PEGylated system was generated with a binding energy of -25.67 kcal/mol at 1.

Graphene-Based Electrospun Fibrous Materials with Enhanced EMI Shielding: Recent Developments and Future Perspectives.

As a result of advancements in electronics/telecommunications, electromagnetic interference (EMI) pollution has gotten worse. Hence, fabrication/investigation of EMI shields having outstanding EMI shielding performance is necessary. Electrospinning (ES) has recently been established in several niches where 1D nanofibers (NFs) fabricated by ES can provide the shielding of EM waves, owing to their exceptional benefits.

Application of DFT Calculations in Designing Polymer-Based Drug Delivery Systems: An Overview.

Drug delivery systems transfer medications to target locations throughout the body. These systems are often made up of biodegradable and bioabsorbable polymers acting as delivery components. The introduction of density functional theory (DFT) has tremendously aided the application of computational material science in the design and development of drug delivery materials.