Evaporative Morphology Tuning of Conducting Polymer Films Under Controlled Vacuum Conditions.

The evaporation of drops on solid surfaces is a ubiquitous natural phenomenon, and their dynamics play a pivotal role in many biological, environmental, and industrial processes. However, the complexity of the underlying mechanisms has largely confined previous studies to liquid drop evaporation under atmospheric conditions. In this study, the first comprehensive investigation of the evaporation dynamics of conducting polymer-containing drops under controlled vacuum environments is presented.

Dynamic monitoring of a 3D-printed airway tissue model using an organic electrochemical transistor.

Assessing the transepithelial resistance to ion flow in the presence of an electric field enables the evaluation of the integrity of the epithelial cell layer. In this study, we introduce an organic electrochemical transistor (OECT) interfaced with a 3D living tissue, designed to monitor the electrical resistance of cellular barriers in real-time. We have developed a non-invasive, tissue-sensing platform by integrating an inkjet-printed large-area OECT with a 3D-bioprinted multilayered airway tissue.

3D-printed airway model as a platform for SARS-CoV-2 infection and antiviral drug testing.

We present a bioprinted three-layered airway model with a physiologically relevant microstructure for the study of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection dynamics. This model exhibited clear cell-cell junctions and mucus secretion with an efficient expression of angiotensin-converting enzyme 2 (ACE2) and transmembrane serine protease 2 (TMPRSS2). Having infected air-exposed epithelial cells in the upper layer with a minimum multiplicity of infection of 0.

Tunable Organic Active Neural Probe Enabling Near-Sensor Signal Processing.

Neural recording systems have significantly progressed to provide an advanced understanding and treatment for neurological diseases. Flexible transistor-based active neural probes exhibit great potential in electrophysiology applications due to their intrinsic amplification capability and tissue-compliant nature. However, most current active neural probes exhibit bulky back-end connectivity since the output is current, and the development of an integrated circuit for voltage output is crucial for near-sensor signal processing at the abiotic/biotic interface.

3D Inkjet-Bioprinted Lung-on-a-Chip.

There is an urgent need for physiologically relevant and customizable biochip models of human lung tissue to provide a niche for lung disease modeling and drug efficacy. Although various lung-on-a-chips have been developed, the conventional fabrication method has been limited in reconstituting a very thin and multilayered architecture and spatial arrangements of multiple cell types in a microfluidic device. To overcome these limitations, we developed a physiologically relevant human alveolar lung-on-a-chip model, effectively integrated with an inkjet-printed, micron-thick, and three-layered tissue.

Sonochemical Degradation of Gelatin Methacryloyl to Control Viscoelasticity for Inkjet Bioprinting.

Inkjet printing enables the mimicry of the microenvironment of natural complex tissues by patterning cells and hydrogels at a high resolution. However, the polymer content of an inkjet-printable bioink is limited as it leads to strong viscoelasticity in the inkjet nozzle. Here it is demonstrated that sonochemical treatment controls the viscoelasticity of a gelatin methacryloyl (GelMA) based bioink by shortening the length of polymer chains without causing chemical destruction of the methacryloyl groups.

3D pulmonary fibrosis model for anti-fibrotic drug discovery by inkjet-bioprinting.

Pulmonary fibrosis (PF) is known as a chronic and irreversible disease characterized by excessive extracellular matrix accumulation and lung architecture changes. Large efforts have been made to develop prospective treatments and study the etiology of pulmonary fibrotic diseases utilizing animal models and spherical organoids. As part of these efforts, we created an all-inkjet-printed three-dimensional (3D) alveolar barrier model that can be used for anti-fibrotic drug discovery.

Cationic Iridium(III) Complexes with Benzothiophene-Quinoline Ligands for Deep-Red Light-Emitting Electrochemical Cells.

Three new cationic cyclometalated iridium(III) complexes equipped with differently substituted benzo[]thiophen-2-ylquinoline cyclometalating ligands and with a sterically demanding -butyl-substituted 2,2'-bipyridine ancillary ligand were synthesized and structurally characterized by NMR and X-ray diffraction techniques. To tune the electronic properties of such complexes, the quinoline moiety of the cyclometalating ligands was kept pristine or equipped with electron-withdrawing phenyl and -CF substituents, leading to complexes , , and , respectively. A complete electrochemical and photophysical investigation, supported by density functional theory calculations, permits a deep understanding of their electronic properties.

Dual-gate thin film transistor lactate sensors operating in the subthreshold regime.

Organic thin-film transistors (TFTs) with an electrochemically functionalized sensing gate are promising platforms for wearable health-monitoring technologies because they are light, flexible, and cheap. Achieving both high sensitivity and low power is highly demanding for portable or wearable devices. In this work, we present flexible printed dual-gate (DG) organic TFTs operating in the subthreshold regime with ultralow power and high sensitivity.

Transfer-Tattoo-Like Cell-Sheet Delivery Induced by Interfacial Cell Migration.

A direct transfer of a cell sheet from a culture surface to a target tissue is introduced. Commercially available, flexible parylene is used as the culture surface, and it is proposed that the UV-treated parylene offers adequate and intermediate levels of cell adhesiveness for both the stable cell attachment during culture and for the efficient cell transfer to a target surface. The versatility of this cell-transfer process is demonstrated with various cell types, including MRC-5, HDFn, HULEC-5a, MC3T3-E1, A549, C2C12 cells, and MDCK-II cells.

Use of a 3D inkjet-printed model to access dust particle toxicology in the human alveolar barrier.

Fine dust particles in the air travel into our body via the airway tract and cause severe respiratory diseases. Thus, the analysis of the effects of dust particles on the respiratory system has been receiving significant research interest. However, most studies on the toxicity of dust particles involve two-dimensional (2D) cell cultures, animal models, and epidemiology.

Effect of Aronia Extract on Collagen Synthesis in Human Skin Cell and Dermal Equivalent.

The regulation of collagen synthesis, which occurs in fibroblasts in the dermal layer, is a key process in dermis regeneration and skin reconstruction. Herein, we investigated whether extract affects the human skin condition. We focused on type I collagen synthesis using two different types of model systems: a monolayer of cells and a bioprinted 3D dermal equivalent.

Printable inks and deformable electronic array devices.

Deformable printed electronic array devices are expected to revolutionize next-generation electronics. However, although remarkable technological advances in printable inks and deformable electronic array devices have recently been achieved, technical challenges remain to commercialize these technologies. In this review article a brief introduction to printing methods highlighting significant research studies on ink formation for conductors, semiconductors, and insulators is provided, and the structural design and successful printing strategies of deformable electronic array devices are described.

The design of an inkjet drive waveform using machine learning.

A drive waveform, which needs to be optimized with ink's fluid properties, is critical to reliable inkjet printing. A generally adopted rule of thumb for its design is mostly dependent on time-consuming and repetitive manual manipulation of its parameters. This work presents a closed-loop machine learning approach to designing an optimal drive waveform for satellite-free inkjet printing at a target velocity.

Spatiotemporal Measurement of Arterial Pulse Waves Enabled by Wearable Active-Matrix Pressure Sensor Arrays.

Wearable pressure sensors have demonstrated great potential in detecting pulse pressure waves on the skin for the noninvasive and continuous diagnosis of cardiac conditions. However, difficulties lie in positioning conventional single-point sensors on an invisible arterial line, thereby preventing the detection of adequate signal amplitude for accurate pulse wave analysis. Herein, we introduce the spatiotemporal measurements of arterial pulse waves using wearable active-matrix pressure sensors to obtain optimal pulse waveforms.

Layout-to-Bitmap Conversion and Design Rules for Inkjet-Printed Large-Scale Integrated Circuits.

Digital inkjet printing (IJP) can greatly reduce the manufacturing cost and waste of flexible large-area electronics by adding micro-fine patterns onto plastic foils. Advanced system design using IJP has been limited by the lack of an electronic design automation (EDA) approach. An EDA approach based on a vector-based layout drawing requires parameterized IJP design rules.

Dual-pulse photoactivated atomic force microscopy.

Photoactivated atomic force microscopy (pAFM), which integrates light excitation and mechanical detection of the deflections of a cantilever tip, has become a widely used tool for probing nanoscale structures. Raising the illuminating laser power is an obvious way to boost the signal-to-noise ratio of pAFM, but strong laser power can damage both the sample and cantilever tip. Here, we demonstrate a dual-pulse pAFM (DP-pAFM) that avoids this problem by using two laser pulses with a time delay.

Homogenization of a reaction diffusion equation can explain influenza A virus load data.

We study the influence of spatial heterogeneity on the antiviral activity of mouse embryonic fibroblasts (MEF) infected with influenza A. MEF of type Ube1L are composed of two distinct sub-populations, the strong type that sustains a strong viral infection and the weak type, sustaining a weak viral load. We present new data on the virus load infection of Ube1L, which have been micro-printed in a checker board pattern of different sizes of the inner squares.

Printed Organic Light-Emitting Diodes on Fabric with Roll-to-Roll Sputtered ITO Anode and Poly(vinyl alcohol) Planarization Layer.

Electronic textiles, which are a combination of fabrics and electronics, can help realize wearable electronic devices by changing the rigidity of these textiles. We demonstrate organic light-emitting diodes (OLEDs) by directly printing the emitting material on fabric substrates using the nozzle-printing technique. Printing the emitting material directly on a fabric substrate with a rough surface is difficult.

All-Inkjet-Printed 3D Alveolar Barrier Model with Physiologically Relevant Microarchitecture.

With the outbreak of new respiratory viruses and high mortality rates of pulmonary diseases, physiologically relevant models of human respiratory system are urgently needed to study disease pathogenesis, drug efficacy, and pharmaceutics. In this paper, a 3D alveolar barrier model fabricated by printing four human alveolar cell lines, namely, type I and II alveolar cells (NCI-H1703 and NCI-H441), lung fibroblasts (MRC5), and lung microvascular endothelial cells (HULEC-5a) is presented. Automated high-resolution deposition of alveolar cells by drop-on-demand inkjet printing enables to fabricate a three-layered alveolar barrier model with an unprecedented thickness of ≈10 µm.

Creation of bladder assembloids mimicking tissue regeneration and cancer.

Current organoid models are limited by their inability to mimic mature organ architecture and associated tissue microenvironments. Here we create multilayer bladder 'assembloids' by reconstituting tissue stem cells with stromal components to represent an organized architecture with an epithelium surrounding stroma and an outer muscle layer. These assembloids exhibit characteristics of mature adult bladders in cell composition and gene expression at the single-cell transcriptome level, and recapitulate in vivo tissue dynamics of regenerative responses to injury.

Sea urchin repelling Tannin- Fe complex coating for ocean macroalgal afforestation.

Intense seaweed grazing by sea urchins has destroyed kelp forests and accelerated the transformation of these forests into barren areas known as urchin barrens. Once the sea urchins occupy the barren ground, it becomes more challenging to restore the kelp forests. Although phlorotannin, a primary herbivore defense chemical secreted by kelp, has been reported to discourage feeding activities of marine herbivores but the direct application of naturally extracted phlorotannin does not effectively repel sea urchins.

Author Correction: Freeform micropatterning of living cells into cell culture medium using direct inkjet printing.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

A Flexible 3D Organic Preamplifier for a Lactate Sensor.

Organic transistors are promising platforms for wearable biosensors. However, the strategies to improve signal amplification have yet to be determined, particularly regarding biosensors that generate very weak signals. In this study, an organic voltage amplifier is presented for a lactate sensor on flexible plastic foil.

High-Efficiency Diphenylpyrimidine Derivatives Blue Thermally Activated Delayed Fluorescence Organic Light-Emitting Diodes.

Organic light-emitting diodes with thermally activated delayed fluorescence emitter have been developed with highly twisted donor-acceptor configurations and color-pure blue emitters. Synthesized 4-(4-(4,6-diphenylpyrimidin-2-yl)phenyl)-10H-spiro[acridine-9,9'-fluorene] (4,6-PhPMAF) doped device with spiroacridine as a donor unit and diphenylpyrimidine as acceptor exhibits the device characteristics such as the luminescence, external quantum efficiencies, current efficiencies, and power efficiencies corresponding to 213 cd/m, 2.95%, 3.