Multimodal Encapsulation to Selectively Permeate Hydrogen and Engineer Channel Conduction for p-Type SnO Thin-Film Transistor Applications.

It has been challenging to synthesize p-type SnO (1 < < 2) and engineer the electrical properties such as carrier density and mobility due to the narrow processing window and the localized oxygen 2p orbitals near the valence band. Herein, we report on the multifunctional encapsulation of p-SnO to limit the surface adsorption of oxygen and selectively permeate hydrogen into the p-SnO channel for thin-film transistor (TFT) applications. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) measurements identified that ultrathin SiO as a multifunctional encapsulation layer effectively suppressed the oxygen adsorption on the back channel surface of p-SnO and selectively diffused hydrogen across the entire thickness of the channel.

Vehicle Load Estimation Using the Reaction Force of a Vertical Displacement Sensor Based on Fiber Bragg Grating.

Accurately calculating the vehicle load acting on a bridge at any one time is crucial to determining the integrity and safety of the bridge. To ensure this integrity and safety, information on the types, characteristics, and load of vehicles that regularly cross the bridge is very important in terms of its structural adequacy and maintenance. In this study, the vehicle load that a bridge will be subjected to was estimated using the reaction force response at the support.

Touchable 3D hierarchically structured polyaniline nanoweb for capture and detection of pathogenic bacteria.

A bacteria-capturing platform is a critical function of accurate, quantitative, and sensitive identification of bacterial pathogens for potential usage in the detection of foodborne diseases. Despite the development of various nanostructures and their surface chemical modification strategies, relative to the principal physical contact propagation of bacterial infections, mechanically robust and nanostructured platforms that are available to capture bacteria remain a significant problem. Here, a three-dimensional (3D) hierarchically structured polyaniline nanoweb film is developed for the efficient capture of bacterial pathogens by hand-touching.

Non-Contact Water Level Response Measurement of a Tubular Level Gauge Using Image Signals.

The occurrence of excessive fluid sloshing during an earthquake can damage structures used to store fluids and can induce secondary disasters, such as environmental destruction and human casualties, due to discharge of the stored fluids. Thus, to prevent such disasters, it is important to accurately predict the sloshing behavior of liquid storage tanks. Tubular level gauges, which visually show the fluid level of a liquid storage tank, are easy to install and economical compared to other water level gauges.

Thickness-controlled black phosphorus tunnel field-effect transistor for low-power switches.

The continuous down-scaling of transistors has been the key to the successful development of current information technology. However, with Moore's law reaching its limits, the development of alternative transistor architectures is urgently needed. Transistors require a switching voltage of at least 60 mV for each tenfold increase in current, that is, a subthreshold swing (SS) of 60 mV per decade (dec).

A facile hydrothermal synthesis of highly luminescent NaYF:Yb/Er upconversion nanoparticles and their biomonitoring capability.

Using a facile hydrothermal procedure, hydrophilic NaYF: Yb/Er nanoparticles (NPs) have been prepared as lanthanide-doped upconversion (UC) materials exhibiting different morphologies, crystal phases and luminescence intensity. The upconversion nanoparticles (UCNP) were characterized by means of electron microscopy and spectroscopy, X-ray diffraction (XRD) and photoluminescence analysis. The molar concentration of reactants and volumes of NaF affect the shapes and uniformity of the synthesized NPs.

Morphological evolution of upconversion nanoparticles and their biomedical signal generation.

Advancements in the fabrication of upconversion nanoparticles (UCNPs) for synthetic control can enable a broad range of applications in biomedical systems. Herein, we experimentally verified the role of the hydrothermal reaction (HR) time in the synthesis of NaYF:20%Yb/3%Er UCNPs on their morphological evolution and phase transformation at different temperatures. Characterizations of the as-prepared UCNPs were conducted using X-ray diffraction (XRD), electron microscopy and spectroscopy, and thermogravimetric and upconversion (UC) luminescence analysis.

Reducing Agent-Assisted Excessive Galvanic Replacement Mediated Seed-Mediated Synthesis of Porous Gold Nanoplates and Highly Efficient Gene-Thermo Cancer Therapy.

Porous Au nanoplates (pAuNPs) were manufactured by a reducing agent-assisted galvanic replacement reaction on Ag nanoplates using a seed-mediated synthetic approach. Two core additives, poly(vinylpyrrolidone) and l-ascorbic acid, prevented fragmentation and proceeded secondary growth. By controlling the concentration of the additives and the amount of replacing ion AuCl, various nanostructures including nanoplates with holes, nanoframes, porous nanoplates, and bumpy nanoparticles with unity and homogeneity were synthesized.

Synthesis of upconversion nanoparticles conjugated with graphene oxide quantum dots and their use against cancer cell imaging and photodynamic therapy.

Multifunctional nanocomposite has a huge potential for cell imaging, drug delivery, and improving therapeutic effect with less side effects. To date, diverse approaches have been demonstrated to endow a single nanostructure with multifunctionality. Herein, we report the synthesis and application of core-shell nanoparticles composed with upconversion nanoparticle (UCNP) as a core and a graphene oxide quantum dot (GOQD) as a shell.

Graphene growth from reduced graphene oxide by chemical vapour deposition: seeded growth accompanied by restoration.

Understanding the underlying mechanisms involved in graphene growth via chemical vapour deposition (CVD) is critical for precise control of the characteristics of graphene. Despite much effort, the actual processes behind graphene synthesis still remain to be elucidated in a large number of aspects. Herein, we report the evolution of graphene properties during in-plane growth of graphene from reduced graphene oxide (RGO) on copper (Cu) via methane CVD.

Enzymatic formation of carbohydrate rings catalyzed by single-walled carbon nanotubes.

Macrocyclic carbohydrate rings were formed via enzymatic reactions around single-walled carbon nanotubes (SWNTs) as a catalyst. Cyclodextrin glucanotransferase, starch substrate and SWNTs were reacted in buffer solution to yield cyclodextrin (CD) rings wrapped around individual SWNTs. Atomic force microscopy showed the resulting complexes to be rings of 12-50 nm in diameter, which were highly soluble and dispersed in aqueous solution.

In-vitro cytotoxicity assessment of carbon-nanodot-conjugated Fe-aminoclay (CD-FeAC) and its bio-imaging applications.

We have investigated the cytotoxic assay of Fe-aminoclay (FeAC) nanoparticles (NPs) and simultaneous imaging in HeLa cells by photoluminescent carbon nanodots (CD) conjugation. Non-cytotoxic, photostable, and CD NPs are conjugated with cationic FeAC NPs where CD NPs play a role in bio-imaging and FeAC NPs act as a substrate for CD conjugation and help to uptake of NPs into cancer cells due to positively charged surface of FeAC NPs in physiological media. As increase of CD-FeAC NPs loading in HeLa cell in vitro, it showed slight cytotoxicity at 1000 μg/mL but no cytotoxicity for normal cells up to concentration of 1000 μg/mL confirmed by two 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and neutral red (NR) assays, with further observations by 4',6-diamidino-2-phenylindole (DAPI) stained confocal microscopy images, possessing that CD-FeAC NPs can be used as potential drug delivery platforms in cancer cells with simultaneous imaging.

Robust fluorescence sensing platform for detection of CD44 cells based on graphene oxide/gold nanoparticles.

Gold-coated graphene oxide hybrid material (GO/AuNPs) has exceptional physical and chemical properties like π-π stacking interaction and plays a role in quencher of fluorescence dye. Therefore, GO/AuNPs could enhance the signal-to-background ratio with fluorescence dye that was the point in this fluorescent biosensor. In this study, tetramethyl-6-carboxy-rhodamine (TAMRA)-labeled aptamers that specifically interact with the hyaluronic acid binding domain of CD44 were used as targets to investigate the applicability of the method.

Dopamine-assisted synthesis of carbon-coated silica for PCR enhancement.

Polymerase chain reaction (PCR) has become one of the most popular methods to identify genomic information on cells and tissues as well as to solve crimes and check genetic diseases. Recently, the nanomaterials including nanocomposite and nanoparticles have been considered as a next generation of solution to improve both quality and productivity of PCR. Herein, taking into these demands, carbon-coated silica was synthesized using silica particles via polymerization of biocompatible dopamine (PD) to form polydopamine (PDA) film and carbonization of PDA into graphitic structures.

Bio-inspired Hierarchical Nanowebs for Green Catalysis.

Bio-inspired 3D hierarchical nanowebs are fabricated using silicon micropillars, carbon nanotubes (CNT), and manganese oxide. The Si pillars act as artificial branches for growing CNTs and the secondary metal coating strengthens the structures. The simple but effective structure provides both chemical and mechanical stability to be used as a green catalyst for recycling waste polymers into raw materials.

Substrate-mediated strain effect on the role of thermal heating and electric field on metal-insulator transition in vanadium dioxide nanobeams.

Single-crystalline vanadium dioxide (VO2) nanostructures have recently attracted great attention because of their single domain metal-insulator transition (MIT) nature that differs from a bulk sample. The VO2 nanostructures can also provide new opportunities to explore, understand, and ultimately engineer MIT properties for applications of novel functional devices. Importantly, the MIT properties of the VO2 nanostructures are significantly affected by stoichiometry, doping, size effect, defects, and in particular, strain.

One-pot synthesis of multifunctional Au@graphene oxide nanocolloid core@shell nanoparticles for Raman bioimaging, photothermal, and photodynamic therapy.

The paper reports a facile one-pot synthesis of core@shell nanoparticles (NPs) composed of Au core and graphene oxide nanocolloid (GON) shell. Unique properties of Au NPs and GON can be incorporated into a single nanohybrid structure to provide desirable functions for theranosis such as localized surface plasmon resonance, Raman scattering, amphiphilic surface, and photothermal conversion. Synthesis of Au@GON NPs is achieved by simple one-pot reaction in aqueous phase utilizing GON as a reducing and stabilizing agent without any additional reducing agent.

Ultrathin sandwich-like MoS2@N-doped carbon nanosheets for anodes of lithium ion batteries.

In this work, we report on a simple and scalable process to synthesize the core-shell nanostructure of MoS2@N-doped carbon nanosheets (MoS2@C), in which polydopamine is coated on the MoS2 surface and is then carbonized. An intensive investigation using transmission electron microscopy and Raman spectroscopy reveals that the as-synthesized MoS2@C possesses a nanoscopic and ultrathin layer of MoS2 sheets with a thin and conformal coating of carbon layers (∼ 3 nm). The MoS2@C demonstrates a superior electrochemical performances as an anode material for lithium ion batteries compared to exfoliated MoS2 and bulk MoS2 samples.

Chiral templating of self-assembling nanostructures by circularly polarized light.

The high optical and chemical activity of nanoparticles (NPs) signifies the possibility of converting the spin angular momenta of photons into structural changes in matter. Here, we demonstrate that illumination of dispersions of racemic CdTe NPs with right- (left-)handed circularly polarized light (CPL) induces the formation of right- (left-)handed twisted nanoribbons with an enantiomeric excess exceeding 30%, which is ∼10 times higher than that of typical CPL-induced reactions. Linearly polarized light or dark conditions led instead to straight nanoribbons.

Graphene oxide assisted spontaneous growth of V2O5 nanowires at room temperature.

Graphene-decorated single crystalline V2O5 nanowires (G-VONs) have been synthesized by mixing graphene oxide (GO) and V2O5 suspensions at room temperature. In this process, V2O5 nanowires (VONs) are formed spontaneously from commercial V2O5 particles with the aid of GO. The as-formed one dimensional G-VONs were characterized by using a X-ray diffractometer, a X-ray photoelectron spectrometer, a scanning electron microscope, and a transmission electron microscope.

Scalable nanopillar arrays with layer-by-layer patterned overt and covert images.

Transferring flexible and scalable nano-pillar arrays on a variety of unconventional substrates, including fabric, paper, and metals, is achieved by a single-step replication process using UV-curable polymers. Local alteration of the contact angle on the nanopillar arrays by LBL films creates selectively hidden images. They can be revealed by the breath and used as an innovative anti-counterfeit technology.

In situ probing of doping- and stress-mediated phase transitions in a single-crystalline VO₂ nanobeam by spatially resolved Raman spectroscopy.

We demonstrate an experimental in situ observation of the temperature-dependent evolution of doping- and stress-mediated structural phase transitions in an individual single-crystalline VO₂ nanobeam on a Au-coated substrate under exposure to hydrogen gas using spatially resolved Raman spectroscopy. The nucleation temperature of the rutile R structural phase in the VO₂ nanobeam upon heating under hydrogen gas was lower than that under air. The spatial structural phase evolution behavior along the length of the VO₂ nanobeam under hydrogen gas upon heating was much more inhomogeneous than that along the length of the same nanobeam under air.

Hierarchical hollow spheres of Fe2O3 @polyaniline for lithium ion battery anodes.

Hierarchical hollow spheres of Fe2 O3 @polyaniline are fabricated by template-free synthesis of iron oxides followed by a post in- and exterior construction. A combination of large surface area with porous structure, fast ion/electron transport, and mechanical integrity renders this material attractive as a lithium-ion anode, showing superior rate capability and cycling performance.

Probing the photothermally induced phase transitions in single-crystalline vanadium dioxide nanobeams.

Using Raman spectroscopy, we demonstrated photothermally induced crystallographic phase transitions of vanadium dioxide (VO2) nanobeams clamped to and free-standing on a substrate. Compared to the temperature-dependent Raman measurements, the laser-power-dependent Raman characteristics provide substantial evidence for the photothermal origin of the phase transitions of the VO2 nanobeams. The laser power necessary to cause phase transitions in the free-standing nanobeam was approximately eight times smaller than the laser power used in the substrate-clamped nanobeam.