Effect of Electrocautery and Laser Treatment on the Composition and Morphology of Surface-Modified Titanium Implants.

The purpose of this study was to investigate the effects of different peri-implantitis treatment methods (Er,Cr:YSGG laser, diode laser, and electrocautery) on various titanium implant surfaces: machined; sandblasted, large-grit, and acid-etched; and femtosecond laser-treated surfaces. Grade 4 titanium (Ti) disks, with a diameter of 10 mm and a thickness of 1 mm, were fabricated and treated using the aforementioned techniques. Subsequently, each treated group of disks underwent different peri-implantitis treatment methods: Er,Cr:YSGG laser (Biolase, Inc.

The Impact of Mechanical Debridement Techniques on Titanium Implant Surfaces: A Comparison of Sandblasted, Acid-Etched, and Femtosecond Laser-Treated Surfaces.

This study evaluated the effects of various mechanical debridement methods on the surface roughness (Ra) of dental implants, comparing femtosecond laser-treated surfaces with conventionally machined and sandblasted with large-grit sand and acid-etched (SLA) implant surfaces. The fabrication of grade 4 titanium (Ti) disks (10 mm in diameter and 1 mm thick) and the SLA process were carried out by a dental implant manufacturer (DENTIS; Daegu, Republic of Korea). Subsequently, disk surfaces were treated with various methods: machined, SLA, and femtosecond laser.

In Vitro Biofilm Formation on Zirconia Implant Surfaces Treated with Femtosecond and Nanosecond Lasers.

(1) Background: The purpose of this study was to evaluate how a zirconia implant surface treated with laser technology affects the degree of biofilm formation. (2) Methods: Experimental titanium (Ti) disks were produced that were sandblasted with large grit and acid-etched (T), and they were compared with zirconia (ZrO) discs with a machined (M) surface topography; a hydrophilic surface topography with a femtosecond laser (HF); and a hydrophobic surface topography with a nanosecond laser (HN) (N = 12 per surface group). An in vitro three-species biofilm sample (Aggregatibacter actinomycetemcomitans (Aa), Porphyromonas gingivalis (Pg), Prevotella intermedia (Pi)) was applied to each disc type, and bacterial adhesion was assessed after 48 and 72 h of incubation using an anaerobic flow chamber model.

Influence of Dental Titanium Implants with Different Surface Treatments Using Femtosecond and Nanosecond Lasers on Biofilm Formation.

This study aimed to evaluate the impact of different surface treatments (machined; sandblasted, large grit, and acid-etched (SLA); hydrophilic; and hydrophobic) on dental titanium (Ti) implant surface morphology, roughness, and biofilm formation. Four groups of Ti disks were prepared using distinct surface treatments, including femtosecond and nanosecond lasers for hydrophilic and hydrophobic treatments. Surface morphology, wettability, and roughness were assessed.

Retina-Inspired Color-Cognitive Learning via Chromatically Controllable Mixed Quantum Dot Synaptic Transistor Arrays.

Artificial photonic synapses are emerging as a promising implementation to emulate the human visual cognitive system by consolidating a series of processes for sensing and memorizing visual information into one system. In particular, mimicking retinal functions such as multispectral color perception and controllable nonvolatility is important for realizing artificial visual systems. However, many studies to date have focused on monochromatic-light-based photonic synapses, and thus, the emulation of color discrimination capability remains an important challenge for visual intelligence.

Large-Area Pixelized Optoelectronic Neuromorphic Devices with Multispectral Light-Modulated Bidirectional Synaptic Circuits.

The complete hardware implementation of an optoelectronic neuromorphic computing system is considered as one of the most promising solutions to realize energy-efficient artificial intelligence. Here, a fully light-driven and scalable optoelectronic neuromorphic circuit with metal-chalcogenide/metal-oxide heterostructure phototransistor and photovoltaic divider is proposed. To achieve wavelength-selective neural operation and hardware-based pattern recognition, multispectral light modulated bidirectional synaptic circuits are utilized as an individual pixel for highly accurate and large-area neuromorphic computing system.

Non-Invasive Optical Coherence Tomography Data-Based Quantitative Algorithm for the Assessment of Residual Adhesive on Bracket-Removed Dental Surface.

The aim of this study was to quantitatively assess the residual adhesive on orthodontic ceramic bracket-removed dental surface. In orthodontic process, ceramic bracket was repeated debonding physically, then the adhesive remained on the dental surface. The residual adhesive caused a lack of adhesive strength between dental and ceramic bracket.

Influence of Sandblasting Particle Size and Pressure on Resin Bonding Durability to Zirconia: A Residual Stress Study.

The influence of residual stress induced by sandblasting the zirconia ceramic surface on the resin bonding to the ceramic is still unclear. The effect of four different sandblasting conditions (with 50 and 110 μm alumina at pressures of 0.2 and 0.

Measurement of Exciton and Trion Energies in Multistacked hBN/WS Coupled Quantum Wells for Resonant Tunneling Diodes.

Quantum confinements, especially quantum in narrow wells, have been investigated because of their controllability over electrical parameters. For example, quantum dots can emit a variety of photon wavelengths even for the same material depending on their particle size. More recently, the research into two-dimensional (2D) materials has shown the availability of several quantum mechanical phenomenon confined within a sheet of materials.

Catalytic Metal-Accelerated Crystallization of High-Performance Solution-Processed Earth-Abundant Metal Oxide Semiconductors.

As an alternative strategy for conventional high-temperature crystallization of metal oxide (MO) channel layers, the catalytic metal-accelerated crystallization (CMAC) process using a metal seed layer is demonstrated for low-temperature crystallization of solution-processed MO semiconductors. In the CMAC process, the catalytic metal layer plays the role of seed sites for initiating and accelerating the crystallization of amorphous MO films. Generally, the solution-processed crystalline-TiO (c-TiO) films required high-temperature crystallization conditions (≥500-600 °C), showing low electrical performance with a high defect density.

Highly Efficient Photo-Induced Charge Separation Enabled by Metal-Chalcogenide Interfaces in Quantum-Dot/Metal-Oxide Hybrid Phototransistors.

Quantum dot (QD)-based optoelectronics have received great interest for versatile applications because of their excellent photosensitivity, facile solution processability, and the wide range of band gap tunability. In addition, QD-based hybrid devices, which are combined with various high-mobility semiconductors, have been actively researched to enhance the optoelectronic characteristics and maximize the zero-dimensional structural advantages, such as tunable band gap and high light absorption. However, the difficulty of highly efficient charge transfer between QDs and the semiconductors and the lack of systematic analysis for the interfaces have impeded the fidelity of this platform, resulting in complex device architectures and unsatisfactory device performance.

A skin-like two-dimensionally pixelized full-color quantum dot photodetector.

Direct full-color photodetectors without sophisticated color filters and interferometric optics have attracted considerable attention for widespread applications. However, difficulties of combining various multispectral semiconductors and improving photon transfer efficiency for high-performance optoelectronic devices have impeded the translation of these platforms into practical realization. Here, we report a low-temperature (<150°C) fabricated two-dimensionally pixelized full-color photodetector by using monolithic integration of various-sized colloidal quantum dots (QDs) and amorphous indium-gallium-zinc-oxide semiconductors.

Environment-Adaptable Artificial Visual Perception Behaviors Using a Light-Adjustable Optoelectronic Neuromorphic Device Array.

Emulating the biological visual perception system typically requires a complex architecture including the integration of an artificial retina and optic nerves with various synaptic behaviors. However, self-adaptive synaptic behaviors, which are frequently translated into visual nerves to adjust environmental light intensities, have been one of the serious challenges for the artificial visual perception system. Here, an artificial optoelectronic neuromorphic device array to emulate the light-adaptable synaptic functions (photopic and scotopic adaptation) of the biological visual perception system is presented.

Corrugated Heterojunction Metal-Oxide Thin-Film Transistors with High Electron Mobility via Vertical Interface Manipulation.

A new strategy is reported to achieve high-mobility, low-off-current, and operationally stable solution-processable metal-oxide thin-film transistors (TFTs) using a corrugated heterojunction channel structure. The corrugated heterojunction channel, having alternating thin-indium-tin-zinc-oxide (ITZO)/indium-gallium-zinc-oxide (IGZO) and thick-ITZO/IGZO film regions, enables the accumulated electron concentration to be tuned in the TFT off- and on-states via charge modulation at the vertical regions of the heterojunction. The ITZO/IGZO TFTs with optimized corrugated structure exhibit a maximum field-effect mobility >50 cm V s with an on/off current ratio of >10 and good operational stability (threshold voltage shift <1 V for a positive-gate-bias stress of 10 ks, without passivation).

Reliable Multivalued Conductance States in TaO Memristors through Oxygen Plasma-Assisted Electrode Deposition with in Situ-Biased Conductance State Transmission Electron Microscopy Analysis.

Transition metal oxide-based memristors have widely been proposed for applications toward artificial synapses. In general, memristors have two or more electrically switchable stable resistance states that device researchers see as an analogue to the ion channels found in biological synapses. The mechanism behind resistive switching in metal oxides has been divided into electrochemical metallization models and valence change models.

High-performance and scalable metal-chalcogenide semiconductors and devices via chalco-gel routes.

We report a general strategy for obtaining high-quality, large-area metal-chalcogenide semiconductor films from precursors combining chelated metal salts with chalcoureas or chalcoamides. Using conventional organic solvents, such precursors enable the expeditious formation of chalco-gels, which are easily transformed into the corresponding high-performance metal-chalcogenide thin films with large, uniform areas. Diverse metal chalcogenides and their alloys (MQ : M = Zn, Cd, In, Sb, Pb; Q = S, Se, Te) are successfully synthesized at relatively low processing temperatures (<400°C).

Resin Bonding to Type IV Gold Alloy Conditioned with a Novel Mercapto Silane System: Effect of Incorporation of a Phosphate Monomer.

Self-assembled monolayers of thiols have been used to link a range of materials to planar gold surfaces or gold nanoparticles in nanoscience and nanotechnology. Novel mercapto silane systems are a promising alternative to dental noble metal alloys for enhanced resin bonding durability Goldbased alloys for full-cast restorations contain various base metal elements, which may bond to acidic functional monomers chemically, in addition to noble metal elements. This study examined how the additional incorporation of a phosphate monomer (di-2-hydroxyethyl methacryl hydrogenphosphate, DHP) into novel mercapto silane primer systems affected the resin bond strength to a type IV gold alloy pretreated with the primers.

Global analysis of gene expression profiles in the submandibular salivary gland of klotho knockout mice.

Salivary dysfunction commonly occurs in many older adults and is considered a physiological phenomenon. However, the genetic changes in salivary glands during aging have not been characterized. The present study analyzed the gene expression profile in salivary glands from accelerated aging klotho deficient mice (klotho-/-, 4 weeks old).

A microcomputed tomography evaluation of the marginal fit of cobalt-chromium alloy copings fabricated by new manufacturing techniques and alloy systems.

Statement Of Problem: Although new digital manufacturing techniques are attracting interest in dentistry, few studies have comprehensively investigated the marginal fit of fixed dental prostheses fabricated with such techniques.

Purpose: The purpose of this in vitro microcomputed tomography (μCT) study was to evaluate the marginal fit of cobalt-chromium (Co-Cr) alloy copings fabricated by casting and 3 different computer-aided design and computer-aided manufacturing (CAD-CAM)-based processing techniques and alloy systems.

Material And Methods: Single Co-Cr metal crowns were fabricated using 4 different manufacturing techniques: casting (control), milling, selective laser melting, and milling/sintering.

Snakebite in Korea: A Guideline to Primary Surgical Management.

Purpose: Snakebite is an emergency which causes local symptoms such as pain and edema around the bite. Systemic symptoms may also develop, such as dizziness or renal failure, and may even cause death. The purpose of this research was to assess the validity and safety of snakebite protocol for surgery when treating snakebite patients.

Triphenylamine substituted anthracene derivatives for blue organic light-emitting diodes.

A series of bipolar anthracene derivatives containing triphenylamine as an electron donating group and pyridine, quinoline, isoquinoline and benzothiazole as electron withdrawing groups were synthesized and characterized. Particularly, a material, 9-quinolinyl-10-triphenylamin anthracene (3) exhibits a highly efficient sky-blue EL emission with the luminous efficiency (LE) of 9.36 cd/A, power efficiency (PE) of 5.

Blue organic light-emitting diodes based on new bipolar anthracene derivatives containing pyridine.

A series of bipolar anthracene derivatives containing pyridine as an electron withdrawing group and cabazole, triphenylamine and indole as electron donating groups were synthesized and characterized. Particularly, Device E, 9-(4'-(10-(pyridin-2-yl)anthracen-9-yl)biphenyl-4-yl)-9H-carbazol exhibits a high-efficient deep-blue EL emission with the luminous efficiency (LE) of 2.31 cd/A, power efficiency (PE) of 1.

The spectrum of lesions and clinical results of arthroscopic stabilization of acute anterior shoulder instability.

Purpose: The purpose of this study is to investigate and analyze accompanying lesions including injury types of anteroinferior labrum lesion in young and active patients who suffered traumatic anterior shoulder dislocation for the first time.

Materials And Methods: The study used magnetic resonance angiography (MRA) to 40 patients with acute anterior shoulder dislocation from April 2004 to April 2008, and of those, 36 with abnormal MRA finding were treated with arthroscopy.

Results: There was a total of 25 cases of anteroinferior glenoid labrum lesions.

The redevelopment and validation of the Rehabilitation Adherence Questionnaire for injured athletes.

This study was designed to redevelop and examine the validity of the Rehabilitation Adherence Questionnaire (RAQ), which can be used in both research and medical rehabilitation settings. The participants in the study were composed of 240 injured athletes (first analysis 120, second analysis 120 athletes) who participated in a physical rehabilitation program. Scale development, descriptive analysis, and factor analysis (exploratory factor analysis, confirmatory factor analysis) developed 25 items of RAQ for injured athletes.

Fracture-dissociation of ceramic liner.

The use of BIOLOX delta ceramic (CeramTec AG, Plochingen, Germany) has been increasing. This ceramic prevents cracking by restraining the phase transformation due to the insertion of nano-sized, yttria-stabilized tetragonal zirconia into the alumina matrix. This restrains the progress of cracking through the formation of platelet-like crystal or whiskers due to the addition of an oxide additive.