Silane grafted chitosan for the efficient remediation of aquatic environment contaminated with arsenic(V).

Hypothesis: Chitosan, naturally abundant biomaterial showed an insignificant affinity toward arsenate. The incorporation of organosilane could improve the physical and chemical properties of chitosan for the efficient removal of arsenate from aquatic environment.

Experiment: The hybrid materials were obtained by grafting the natural biopolymer chitosan with 3-mercaptopropyl trimethoxysilane (CHMS) and trimethoxy-octylsilane (CHTS).

Degradation of multi-DNAPLs by a UV/persulphate/ethanol system with the additional injection of a base solution.

This study was conducted to investigate the inhibited influences on and solution to the degradation of four types of dense non-aqueous phase liquids (DNAPLs) (i.e. perchloroethylene [PCE], trichloroethylene [TCE], chloroform [CF], and carbon tetrachloride [CT]) all at the same instance in groundwater (GW).

Persulfate activation by iron oxide-immobilized MnO2 composite: identification of iron oxide and the optimum pH for degradations.

Iron oxide-immobilized manganese oxide (MnO2) composite was prepared and the reactivity of persulfate (PS) with the composite as activator was investigated for degradation of carbon tetrachloride and benzene at various pH levels. Brunauer-Emmett-Teller (BET) surface area of the composite was similar to that of pure MnO2 while the pore volume and diameter of composite was larger than those of MnO2. Scanning electron microscopy couples with energy dispersive spectroscopy (SEM-EDS) showed that Fe and Mn were detected on the surface of the composite, and X-ray diffraction (XRD) analysis indicated the possibilities of the existence of various iron oxides on the composite surface.

The oxidation of toluene sorbed on activated carbon in the presence of H(2)O(2) and manganese oxide.

We investigated the oxidation of toluene sorbed on activated carbon (AC) in the presence of hydrogen peroxide (H(2)O(2)) and pyrolusite (MnO(2)). Sorbed toluene was prepared by reacting a toluene-saturated solution and AC. The amounts of sorbed toluene (mg of toluene/g of AC) decreased as the amounts of AC were increased.

Synthesis of iron composites on nano-pore substrates: identification and its application to removal of cyanide.

Two types of nano-pore substrates, waste-reclaimed (WR) and soil mineral (SM) with the relatively low density, were modified by the reaction with irons (i.e. Fe(II):Fe(III)=1:2) and the applicability of the modified substrates (i.

Feasibility study on an oxidant-injected permeable reactive barrier to treat BTEX contamination: adsorptive and catalytic characteristics of waste-reclaimed adsorbent.

The adsorptive and catalytic characteristics of waste-reclaimed adsorbent (WR), which is a calcined mixture of bottom-ash and dredged-soil, was investigated for its application to treating BTEX contamination. BTEX adsorption in WR was 54%, 64%, 62%, and 65%, respectively, for a 72 h reaction time. Moreover, the catalytic characteristics of WR were observed when three types of oxidation systems (i.

Effect of metal oxides on the reactivity of persulfate/Fe(II) in the remediation of diesel-contaminated soil and sand.

The effect of metal oxides on the ability of persulfate (PS) with Fe(II) to remediate diesel-contaminated soil was investigated. In both natural soil and purchased sand, the highest diesel degradation occurred at pH 3 and the optimum molar ratio of PS/Fe(II) was 100:1 (i.e.

Application of a peroxymonosulfate/cobalt (PMS/Co(II)) system to treat diesel-contaminated soil.

We investigated the feasibility of using peroxymonosulfate (PMS) with transition metals (PMS/M(+) system) for remediation of diesel-contaminated soils. To the best of our knowledge, this is the first attempt to apply a PMS/M(+) system for the treatment of diesel-contaminated soils. Two well-known transition metals, Fe(II) and Co(II), used to activate PMS including the effect of co-existence of counter anions (Cl(-) and SO(4)(2-)) were tested and it revealed that the most effective degradation of diesel was achieved with cobalt chloride.

PCE DNAPL degradation using ferrous iron solid mixture (ISM).

Ferrous iron solid mixture (ISM) containing Fe(II), Fe(III), and Cl was synthesized for degradation of tetrachloroethene (PCE) as a dense non-aqueous phase liquid (DNAPL), and an extraction procedure was developed to measure concentrations of PCE in both the aqueous and non-aqueous phases. This procedure included adding methanol along with hexane in order to achieve the high extraction efficiency, particularly when solids were present. When PCE was present as DNAPL, dechlorination of PCE was observed to decrease linearly with respect to the total PCE concentration (aqueous and non-aqueous phases) and the concentration of PCE in the aqueous phase was observed to be approximately constant.

Hydrogen peroxide decomposition on manganese oxide (pyrolusite): kinetics, intermediates, and mechanism.

The objective of this study is the kinetic interpretation of hydrogen peroxide decomposition on manganese oxide (pyrolusite) and the explanation of the reaction mechanism including the hydroperoxide/superoxide anion. The decomposition of hydrogen peroxide on manganese oxide at pH 7 was represented by a pseudo first-order model. The maximum value of the observed first-order rates constants (k(obs)) was 0.

Kinetics of BTEX biodegradation by a coculture of Pseudomonas putida and Pseudomonas fluorescens under hypoxic conditions.

Pseudomonas putida and Pseudomonas fluorescens present as a coculture were studied for their abilities to degrade benzene, toluene, ethylbenzene, and xylenes (collectively known as BTEX) under various growth conditions. The coculture effectively degraded various concentrations of BTEX as sole carbon sources. However, all BTEX compounds showed substrate inhibition to the bacteria, in terms of specific growth, degradation rate, and cell net yield.

The adsorption characteristics of heavy metals by various particle sizes of MSWI bottom ash.

The incineration rate of municipal solid waste (MSW) has been increased because of difficulty in securing a proper disposal site for MSW in Korea. The advantage of incineration is reduction of the volume of waste; however, significant amounts of bottom ash and fly ash were generated in the incineration process. Their treatment has attracted growing interest because of the potential toxicity of hazardous heavy metals.

Analysis of trihalomethanes in drinking water using headspace-SPME technique with gas chromatography.

In many drinking water treatment plants, the chlorination process is one of the main techniques used for the disinfection of water. This disinfecting treatment leads to the formation of trihalomethanes (THMs) such as chloroform, dichlorobromomethane, chlorodibromomethane and bromoform. In this study, headspace-solid-phase microextraction (HS-SPME, 85 microm carboxen/polydimethylsiloxane fiber) technique was applied for the analysis of THMs in drinking water.