Study on the influence of active oxygen on the natural oxidation of arsenopyrite under different temperature conditions.

Arsenic (As), a toxic element, contaminates farmlands, rivers, and groundwater, posing severe environmental and health risks. Notably, As-containing materials in tailings are affected by temperature variations during long-term storage, and this considerably impact the oxidation and migration of elements in arsenopyrite.This study focused on arsenopyrite and investigated the process of its oxidative dissolution and release of arsenic under different temperature conditions by using in-situ XRD, in-situ XPS and electron paramagnetic resonance spectroscopy(EPR), The role of oxygen free radicals in the oxidation of arsenopyrite was elucidated.

Effect of calcium sources on enzyme-induced carbonate precipitation to solidify desert aeolian sand.

Enzyme-induced carbonate precipitation (EICP) is a promising technique for soil reinforcement. To select a suitable calcium source and a suitable solution amount for aeolian sand stabilization using EICP, specimens treated with different solution amounts (1.5, 2, 2.

Machine learning-enabled forward prediction and inverse design of 4D-printed active plates.

Shape transformations of active composites (ACs) depend on the spatial distribution of constituent materials. Voxel-level complex material distributions can be encoded by 3D printing, offering enormous freedom for possible shape-change 4D-printed ACs. However, efficiently designing the material distribution to achieve desired 3D shape changes is significantly challenging yet greatly needed.

Biomineralization for Reducing and Controlling Sand-Dust Storms.

The sand-dust weather and sand-dust storms have become a serious environmental disaster worldwide. It is an important challenge to develop technologies for desert sand solidification in order to prevent and control sand-dust weather. The biomineralization technology for solidifying desert sands has been a novel method for reinforced soils in recent years.

Transforaminal posterior lumbar interbody fusion microscopic safe operating area: a three-dimensional model study based on computed tomography imaging.

Background: Endoscopic spine lumbar interbody fusion (Endo-LIF) is well-regarded within the academic community. However, it presents challenges such as intraoperative disorientation, high rates of nerve damage, a steep learning curve, and prolonged surgical times, often occurring during the creation of the operative channel. Furthermore, the undefined safe operational zones under endoscopy continue to pose risks to surgical safety.

Chemical Circularity in 3D Printing with Biobased Δ-Valerolactone.

Digital Light Processing (DLP) is a vat photopolymerization-based 3D printing technology that fabricates parts typically made of chemically crosslinked polymers. The rapidly growing DLP market has an increasing demand for polymer raw materials, along with growing environmental concerns. Therefore, circular DLP printing with a closed-loop recyclable ink is of great importance for sustainability.

Mechanism of arsenic release process from arsenopyrite chemical oxidation.

Oxidation of arsenopyrite is one of the main causes of arsenic pollution in the environment. This study, examind changes in the surface properties of arsenopyrite in the presence of oxygen. Furthermore, X-ray photoelectron spectroscopy, in situ Raman analysis, high-resolution transmission electron microscopy, and ab initio molecular dynamics were carried out on arsenopyrite, and the oxidation properties and processes of the arsenopyrite surface, along with the Fe/As/S oxidation processes, were analysed In situ-Raman spectroscopy data clearly showed that in the presence of oxygen, Fe ions were transformed into Fe ions on the surface of arsenopyrite at 207 cm, and the content of iron oxides on the surface of arsenopyrite increased significantly over time.

Biomineralization To Prevent Microbially Induced Corrosion on Concrete for Sustainable Marine Infrastructure.

Microbially induced corrosion (MIC) on concrete represents a serious issue impairing the lifespan of coastal/marine infrastructure. However, currently developed concrete corrosion protection strategies have limitations in wide applications. Here, a biomineralization method was proposed to form a biomineralized film on concrete surfaces for corrosion inhibition.

State-of-the-art review of soil erosion control by MICP and EICP techniques: Problems, applications, and prospects.

In recent years, the application of microbially induced calcite precipitation (MICP) and enzyme-induced carbonate precipitation (EICP) techniques have been extensively studied to mitigate soil erosion, yielding substantial achievements in this regard. This paper presents a comprehensive review of the recent progress in erosion control by MICP and EICP techniques. To further discuss the effectiveness of erosion mitigation in-depth, the estimation methods and characterization of erosion resistance were initially compiled.

Cold-programmed shape-morphing structures based on grayscale digital light processing 4D printing.

Shape-morphing structures that can reconfigure their shape to adapt to diverse tasks are highly desirable for intelligent machines in many interdisciplinary fields. Shape memory polymers are one of the most widely used stimuli-responsive materials, especially in 3D/4D printing, for fabricating shape-morphing systems. They typically go through a hot-programming step to obtain the shape-morphing capability, which possesses limited freedom of reconfigurability.

Active Materials for Functional Origami.

In recent decades, origami has been explored to aid in the design of engineering structures. These structures span multiple scales and have been demonstrated to be used toward various areas such as aerospace, metamaterial, biomedical, robotics, and architectural applications. Conventionally, origami or deployable structures have been actuated by hands, motors, or pneumatic actuators, which can result in heavy or bulky structures.

One-Pot Synthesis of Depolymerizable δ-Lactone Based Vitrimers.

A depolymerizable vitrimer that allows both reprocessability and monomer recovery by a simple and scalable one-pot two-step synthesis of vitrimers from cyclic lactones is reported. Biobased δ-valerolactone with alkyl substituents (δ-lactone) has low ceiling temperature; thus, their ring-opening-polymerized aliphatic polyesters are capable of depolymerizing back to monomers. In this work, the amorphous poly(δ-lactone) is solidified into an elastomer (i.

A novel method combining VAT photopolymerization and casting for the fabrication of biodegradable Zn-1Mg scaffolds with triply periodic minimal surface.

Zinc alloy porous scaffolds are expected to be the next generation of degradable orthopedic implants attributed to their suitable degradation rate. However, a few studies have thoroughly investigated its applicable preparation method and functionality as an orthopedic implant. This study fabricated Zn-1Mg porous scaffolds with triply periodic minimal surface (TPMS) structure by a novel method combining VAT photopolymerization and casting.

Single-vat single-cure grayscale digital light processing 3D printing of materials with large property difference and high stretchability.

Multimaterial additive manufacturing has important applications in various emerging fields. However, it is very challenging due to material and printing technology limitations. Here, we present a resin design strategy that can be used for single-vat single-cure grayscale digital light processing (g-DLP) 3D printing where light intensity can locally control the conversion of monomers to form from a highly stretchable soft organogel to a stiff thermoset within in a single layer of printing.

Effect of the Combination of Torsional and Tensile Stress on Corrosion Behaviors of Biodegradable WE43 Alloy in Simulated Body Fluid.

The real physiological environment of the human body is complicated, with different degrees and forms of loads applied to biomedical implants caused by the daily life of the patients, which will definitely influence the degradation behaviors of Mg-based biodegradable implants. In the present study, the degradation behaviors of modified WE43 alloys under the combination of torsional and tensile stress were systematically investigated. Slow strain rate tensile tests revealed that the simulated body fluid (SBF) solution could deteriorate the ultimate tensile stress of WE43 alloy from 210.

4D Printing of Freestanding Liquid Crystal Elastomers via Hybrid Additive Manufacturing.

Liquid crystal elastomers (LCE) are appealing candidates among active materials for 4D printing, due to their reversible, programmable and rapid actuation capabilities. Recent progress has been made on direct ink writing (DIW) or Digital Light Processing (DLP) to print LCEs with certain actuation. However, it remains a challenge to achieve complicated structures, such as spatial lattices with large actuation, due to the limitation of printing LCEs on the build platform or the previous layer.

Mechanical properties, degradation behavior and cytocompatibility of biodegradable 3vol%X (X = MgO, ZnO and CuO)/Zn matrix composites with excellent dispersion property fabricated by graphene oxide-assisted hetero-aggregation.

Metal matrix composites have been recognized as a feasible approach to obtain a new generation of biodegradable Zn-based material. Nevertheless, there is a great challenge in achieving good dispersion properties of the bioactive reinforcements within zinc matrix. A novel and facile approach, namely graphene oxide (GO)-assisted hetero-aggregation, were developed to achieve uniformly dispersed nanoceramics in the Zn matrix, by using very low-content (0.

Synergistic Mechanism of Combined Inhibitors on the Selective Flotation of Arsenopyrite and Pyrite.

The selective action mechanism of sodium butyl xanthate (BX), ammonium salt (NH ), and sodium -nitrobenzoate (m-NBO) on pyrite and arsenopyrite was examined by experiments and quantum chemistry. The experiments show that under alkaline conditions, ammonium salt (NH ) and m-NBO can have a strong inhibitory effect on arsenopyrite. At pH 11, the recovery rate of arsenopyrite reduces to 16%.

Research on freeze-thaw and dry-wet durability of enzymatic calcification for surface protection.

The enzymatically induced carbonate precipitation (EICP) technique is currently studied for dust control because of the formation of cemented crust layer. In the present study, polyvinyl acetate (PVAc) was used with EICP together as the EICP-PVAc treatment to solidify dust soils. In addition, several treated dust soil areas always experience repeated freeze-thaw (FT) or dry-wet (DW) cycles, both of which result in the damage of structure.

Advance of microfluidic constriction channel system of measuring single-cell cortical tension/specific capacitance of membrane and conductivity of cytoplasm.

This paper reported a microfluidic platform which realized the characterization of inherent single-cell biomechanical and bioelectrical parameters simultaneously. Individual cells traveled through a constriction channel with deformation images and impedance variations captured and processed into cortical tension T , specific membrane capacitance C , and cytoplasmic conductivity σ based on an equivalent biophysical model. These properties of thousands of individual cells of K562, Jurkat, HL-60, HL-60 treated with paraformaldehyde (PA)/cytochalasin D (CD)/concanavalin A (ConA), granulocytes of Donor 1, Donor 2, and Donor 3 were quantified for the first time.

Fabrication and characterization of biodegradable zinc matrix composites reinforced by uniformly dispersed beta-tricalcium phosphate via graphene oxide-assisted hetero-agglomeration.

The development of biodegradable Zn matrix composites has been considered a promising approach to achieving enhanced mechanical properties, controllable degradation rate, good biocompatibility, and good osseointegration as orthopedic implants. However, scant literature regarding Zn matrix composites has been reported because of the great difficulty in dispersing the nano-sized bioactive reinforcements uniformly within the Zn matrix. In the present study, a novel and effective method were employed to obtain Zn matrix composites reinforced by uniformly dispersed beta-tricalcium phosphate (β-TCP) via graphene oxide (GO)-assisted hetero-agglomeration and subsequent spark plasma sintering process.

Surface rainfall erosion resistance and freeze-thaw durability of bio-cemented and polymer-modified loess slopes.

Microbially induced calcite precipitation (MICP) has been shown to mitigate sand erosion; however, few studies have applied MICP on loess soils. In this study, polyacrylamide (PAM) was added to the cementation solution, and combined MICP-PAM treatment was applied to improve the surface erosion resistance of loess-slopes. The freeze-thaw (FT) durability of MICP-PAM treated loess slopes was also studied.

Enhanced rainfall erosion durability of enzymatically induced carbonate precipitation for dust control.

Globally, most cities are facing severe challenges caused by dust pollution. Recently, the significant dust control application potential of the environmentally friendly enzymatically induced carbonate precipitation (EICP) has been demonstrated. However, repeated rainfall erosion negatively affects the long-term durability of several EICP treated areas.

Mineralization crust field experiment for desert sand solidification based on enzymatic calcification.

Sandstorms have been recognized as severe natural disasters worldwide and it is of great significance to propose an effective and environmentally friendly method to combat sandstorm. In this study, the enzymatic calcification (EC) treatment technology was used for mineralization crust and desert sand solidification. Both laboratory experiments and field site tests were conducted to demonstrate the feasibility of EC treatment to improve wind-erosion resistance and rainfall-erosion resistance.

Application of enzymatic calcification for dust control and rainfall erosion resistance improvement.

Globally, most cities are facing severe challenges associated with dust pollution and it is of great significance to propose an effective and environmentally friendly dust control method. This study used enzymatically induced calcite precipitation (EICP) technology for dust control. Moreover, polyvinyl acetate (PVAc) was added to the cementation solution to improve its rainfall erosion resistance.