Effect of material and antagonist type on the wear of occlusal devices with different compositions fabricated by using conventional, additive, and subtractive manufacturing.

Statement Of Problem: Additive (AM) and subtractive (SM) manufacturing have become popular for fabricating occlusal devices with materials of different chemical compositions. However, knowledge on the effect of material and antagonist type on the wear characteristics of occlusal devices fabricated by using different methods is limited.

Purpose: The purpose of this in vitro study was to evaluate the effect of material and antagonist type on the wear of occlusal devices fabricated by using conventional manufacturing, AM, and SM.

Influence of Multiple Sterilization on Performance of Titanium Pegs When Measuring Implant Stability With Resonance Frequency Analyses.

This in vitro study was conducted to investigate the repeatability of the implant stability quotients (ISQ) measured with multipegs after numerous sterilizations and to detect the exact time when the readings start to deviate. Multipegs were sterilized with 3 different methods (autoclaved, autoclaved + ultrasonic cleaner, chemical disinfection + autoclaved) and grouped according to the method applied. All specimens were put into the autoclave with sealed packages every time they were sterilized.

Comparative Evaluation of Survival Rates and Marginal Bone Levels of Nonsplinted Immediately Loaded Interforaminal Mandibular Implant-Retained Overdentures: A Randomized Controlled Clinical Trial with 5-Year Results.

Purpose: Τo evaluate and compare the marginal bone loss (MBL), survival rates, and periodontal parameters of immediately loaded implants with either Dolder bar or Locator attachments placed in the interforaminal region of edentulous mandibles.

Materials And Methods: A total of included 19 patients with edentulous mandibles each received two implants in the interforaminal area of the symphysis. Randomly allocated Dolder bar or Locator attachments were then attached immediately, and both clips and a framework were fastened to the denture by the dental laboratory within 24 hours.

Reliability and validity of the Turkish version of oral health impact profile for edentulous subjects.

Purpose: The validated translations of the OHIP-EDENT exist in different languages; however, there is no reliable and validated Turkish translation. The present study was conducted to evaluate the reliability and to validate the Oral Health Impact Profile in edentulous subjects translated to Turkish (OHIP-EDENT-T).

Materials And Methods: The study sample included 104 conventional complete denture wearers (58 women and 46 men, mean age: 61.

The influence of framework material on stress distribution in maxillary complete-arch fixed prostheses supported by four dental implants: a three-dimensional finite element analysis.

The purpose of the present study was to compare the stress distribution patterns of four materials used for the framework of All-on-4 prostheses. Following framework materials were evaluated: PEKK, PEEK, titanium, and monolithic zirconia. Bilateral 150 N axial and oblique loads were applied in the first molar region and analyzed using FEA.

Technique for Converting A Fractured Implant Locator Abutment to A Custom Implant Cast Post and Core.

This technique article describes an efficient, cost effective and time saving procedure using the fractured abutment as a custom cast post and core when an overdenture abutment is fractured and attempts to retrieve the fractured segment fail.

Reverse Torque Values of Abutment Screws After Dynamic Loading: Effects of Sealant Agents and the Taper of Conical Connections.

The purpose of this in vitro study was to evaluate the influence of taper angle in internal conical connections of implant systems and the application of chlorhexidine gel as an antibacterial agent or polyvinyl siloxane sealant on reverse torque values of abutment screws after dynamic loading. Four implant systems having different taper angles (5.4°, 12°, 45°, 60°) were tested in this study.

Comparison of four-implant-retained overdentures and implant-supported fixed prostheses using the All-on-4 concept in the maxilla in terms of patient satisfaction, quality of life, and marginal bone loss: a 2-year retrospective study.

Objective: The purpose of the present study was to compare and assess maxillary edentulous patients treated with four-implant-retained overdentures and with implant-supported fixed prostheses using the All-on-4 concept in terms of patient satisfaction, oral health-related quality of life, and marginal bone loss.

Method And Materials: Thirty-three patients treated with either maxillary four-implant-retained overdentures (n = 15) or with maxillary implant-supported fixed prosthesis using the All-on-4 concept (n = 18) were compared in terms of patient satisfaction, quality of life, and marginal bone loss. Independent sample t test was used to compare the two groups in terms of satisfaction, OHIP-14 scores, and marginal bone loss.

Custom and prefabricated PolyEtherKetoneKetone (PEKK) post-core systems bond strength: Scanning electron microscopy evaluation.

The present study evaluated the bond strengths of prefabricated PolyEtherKetoneKetone (PEKK) posts, PEKK posts custom-configured according to root-canal size, and conventional fiber posts. A total of 30 maxillary incisors were randomly divided into three groups, as follows: Group 1: fiber posts; Group 2: prefabricated PEKK posts; Group 3; custom-made PEKK posts. Following endodontic treatment, post spaces were prepared, and posts were cemented with resin cement.

Effects of implant-related variables on the marginal bone loss around dental implants.

Objective: Marginal bone loss (MBL), a prognostic parameter for implant success, is associated with implant- and patient-related variables. The purpose of this study was to analyze the effects of the crown-to-implant ratio and independent factors of implant diameter, implant length, implant type, location, and platform switching on distal and mesial MBLs at the 6-, 12-, 24-, and 36-month recall sessions of single crown implant-supported restorations.

Method And Materials: Radiographic and clinical data of patients treated with single crown implants were collected.

Effect of Smoking and Locations of Dental Implants on Peri-Implant Parameters: 3-Year Follow-Up.

BACKGROUND Smoking may be a risk factor for marginal bone loss (MBL) and oral mucosal inflammation surrounding dental implants. This retrospective study evaluated the effects of smoking on dental implants in patients with fixed implant-supported prostheses over a period of 36 months following loading. MATERIAL AND METHODS We assessed 120 patients (68 women, 52 men, ages 19-74 years (mean age: 55.

Distraction of the temporomandibular joint condyle in patients with unilateral non-reducing disc displacement: Fact or fiction?

Objectives: This study investigated the distractive effect of a unilateral pivot splint on patients with unilateral disc displacement without reduction.

Methods: The study group was comprised of 18 patients who had no history of treatment with removable prosthetic restorations of molars, premolars, or canine teeth, and no previous treatment for temporomandibular disorder. Joint spaces measurements made on magnetic resonance images indicated the affected side to be narrower than the healthy side.

The correlation between direction and amount of retrusive movement and condyle position and joint space.

Objective: The direction and amount of retrusive movement may be correlated with the amount of joint space and the maximum intercuspal position of the condyle. The aim of this study was to identify any such correlation using an ultrasonic jaw motion analyzer and digital volumetric tomographic (DVT) scans.

Methods: Thirty-five dental students were selected as subjects.