Effects of phosphorous and antimony doping on thin Ge layers grown on Si.

Suppression of threading dislocations (TDs) in thin germanium (Ge) layers grown on silicon (Si) substrates has been critical for realizing high-performance Si-based optoelectronic and electronic devices. An advanced growth strategy is desired to minimize the TD density within a thin Ge buffer layer in Ge-on-Si systems. In this work, we investigate the impact of P dopants in 500-nm thin Ge layers, with doping concentrations from 1 to 50 × 10 cm.

Hydrophilic and hydrophobic drug release from core (polyvinylpyrrolidone)-sheath (ethyl cellulose) pressure-spun fibers.

A core-sheath structure is one of the methods developed to overcome the challenges often faced when using monolithic fibers for drug delivery. In this study, fibers based on polyvinylpyrrolidone (core) and ethyl cellulose (sheath) were successfully produced using a novel core-sheath pressure-spinning process. For comparison, these two polymers were also processed into as blend fibers.

Initialization of Nanowire or Cluster Growth Critically Controlled by the Effective V/III Ratio at the Early Nucleation Stage.

For self-catalyzed nanowires (NWs), reports on how the catalytic droplet initiates successful NW growth are still lacking, making it difficult to control the yield and often accompanying a high density of clusters. Here, we have performed a systematic study on this issue, which reveals that the effective V/III ratio at the initial growth stage is a critical factor that governs the NW growth yield. To initiate NW growth, the ratio should be high enough to allow the nucleation to extend to the entire contact area between the droplet and substrate, which can elevate the droplet off of the substrate, but it should not be too high in order to keep the droplet.

Thermally-driven formation method for growing (quantum) dots on sidewalls of self-catalysed thin nanowires.

Embedding quantum dots (QDs) on nanowire (NW) sidewalls allows the integration of multi-layers of QDs into the active region of radial p-i-n junctions to greatly enhance light emission/absorption. However, the surface curvature makes the growth much more challenging compared with growths on thin-films, particularly on NWs with small diameters (Ø < 100 nm). Moreover, the {110} sidewall facets of self-catalyzed NWs favor two-dimensional growth, with the realization of three-dimensional Stranski-Krastanow growth becoming extremely challenging.

Generation of Core-Sheath Polymer Nanofibers by Pressurised Gyration.

The ability to generate core-sheath bicomponent polymer nanofibers in a single-step with scale-up possibilities is demonstrated using pressurised gyration manufacturing. This is the first time that nanofiber containing more than one polymer having a core-sheath configuration has been generated in this way. Water-soluble polymers polyethylene oxide (PEO) and polyvinyl pyrrolidone (PVP) are used as the core and sheath layers, respectively.

Human airway-like multilayered tissue on 3D-TIPS printed thermoresponsive elastomer/collagen hybrid scaffolds.

Developing a biologically representative complex tissue of the respiratory airway is challenging, however, beneficial for treatment of respiratory diseases, a common medical condition representing a leading cause of death in the world. This in vitro study reports a successful development of synthetic human tracheobronchial epithelium based on interpenetrated hierarchical networks composed of a reversely 3D printed porous structure of a thermoresponsive stiffness-softening elastomer nanohybrid impregnated with collagen nanofibrous hydrogel. Human bronchial epithelial cells (hBEpiCs) were able to attach and grow into an epithelial monolayer on the hybrid scaffolds co-cultured with either human bronchial fibroblasts (hBFs) or human bone-marrow derived mesenchymal stem cells (hBM-MSCs), with substantial enhancement of mucin expression, ciliation, well-constructed intercellular tight junctions and adherens junctions.

Highly Strained III-V-V Coaxial Nanowire Quantum Wells with Strong Carrier Confinement.

Coaxial quantum wells (QWs) are ideal candidates for nanowire (NW) lasers, providing strong carrier confinement and allowing close matching of the cavity mode and gain medium. We report a detailed structural and optical study and the observation of lasing for a mixed group-V GaAsP NW with GaAs QWs. This system offers a number of potential advantages in comparison to previously studied common group-V structures ( e.

Growth and Fabrication of High-Quality Single Nanowire Devices with Radial p-i-n Junctions.

Nanowires (NWs) with radial p-i-n junction have advantages, such as large junction area and small influence from the surface states, which can lead to highly efficient material use and good device quantum efficiency. However, it is difficult to make high-quality core-shell NW devices, especially single NW devices. Here, the key factors during the growth and fabrication process that influence the quality of single core-shell p-i-n NW devices are studied using GaAs(P) NW photovoltaics as an example.

Doping of Self-Catalyzed Nanowires under the Influence of Droplets.

Controlled and reproducible doping is essential for nanowires (NWs) to realize their functions. However, for the widely used self-catalyzed vapor-liquid-solid (VLS) growth mode, the doping mechanism is far from clear, as the participation of the nanoscale liquid phase makes the doping environment highly complex and significantly different from that of the thin film growth. Here, the doping mechanism of self-catalyzed NWs and the influence of self-catalytic droplets on the doping process are systematically studied using beryllium (Be) doped GaAs NWs.

Growth of Pure Zinc-Blende GaAs(P) Core-Shell Nanowires with Highly Regular Morphology.

The growth of self-catalyzed core-shell nanowires (NWs) is investigated systematically using GaAs(P) NWs. The defects in the core NW are found to be detrimental for the shell growth. These defects are effectively eliminated by introducing beryllium (Be) doping during the NW core growth and hence forming Be-Ga alloy droplets that can effectively suppress the WZ nucleation and facilitate the droplet consumption.

Influence of Droplet Size on the Growth of Self-Catalyzed Ternary GaAsP Nanowires.

The influences of droplet size on the growth of self-catalyzed ternary nanowires (NWs) were studied using GaAsP NWs. The size-induced Gibbs-Thomson (GT) effect makes the smaller catalytic droplets have lower effective supersaturations and hence slower nucleation rates than the larger ones. Large variation in droplet size thus led to the growth of NWs with low uniformity, while a good size uniformity of droplets resulted in the production of highly uniform NWs.

Self-catalyzed ternary core-shell GaAsP nanowire arrays grown on patterned Si substrates by molecular beam epitaxy.

The growth of self-catalyzed ternary core-shell GaAsP nanowire (NW) arrays on SiO2 patterned Si(111) substrates has been demonstrated by using solid-source molecular beam epitaxy. A high-temperature deoxidization step up to ∼ 900 °C prior to NW growth was used to remove the native oxide and/or SiO2 residue from the patterned holes. To initiate the growth of GaAsP NW arrays, the Ga predeposition used for assisting the formation of Ga droplets in the patterned holes, was shown to be another essential step.

Three-dimensional structure analysis and percolation properties of a barrier marine coating.

Artificially structured coatings are widely employed to minimize materials deterioration and corrosion, the annual direct cost of which is over 3% of the gross domestic product (GDP) for industrial countries. Manufacturing higher performance anticorrosive coatings is one of the most efficient approaches to reduce this loss. However, three-dimensional (3D) structure of coatings, which determines their performance, has not been investigated in detail.