Enhanced Enzymatic Sugar Recovery of Dilute-Acid-Pretreated Corn Stover by Sodium Carbonate Deacetylation.

The prehydrolysate from dilute acid pretreatment of lignocellulosic feedstocks often contains inhibitory compounds that can seriously inhibit the subsequent enzymatic and fermentation processes. Acetic acid is one of the most representative toxic compounds. In this research, alkaline deacetylation of corn stover was carried out using sodium carbonate under mild conditions to selectively remove the acetyl groups of the biomass and reduce the toxicity of the prehydrolysate.

The solar end game: bibliometric analysis, research and development evolution, and patent activity of hybrid photovoltaic/thermal-phase change material.

Solar photovoltaic-thermal hybrid with phase change material (PVT-PCM) emerges as an intelligent game changer to stimulate the clean, reliable, and affordable renewable energy technology. This PVT-PCM technology can be manipulated into generating both electricity and thermal energy that feature its practicality for residential and industrial applications. Hybridized of PCM into PVT design adds value to existing architecture with its capability to store excess heat that can be used during insufficient solar irradiation.

Prediction model for biochar energy potential based on biomass properties and pyrolysis conditions derived from rough set machine learning.

Biochar is a high-carbon-content organic compound that has potential applications in the field of energy storage and conversion. It can be produced from a variety of biomass feedstocks such as plant-based, animal-based, and municipal waste at different pyrolysis conditions. However, it is difficult to produce biochar on a large scale if the relationship between the type of biomass, operating conditions, and biochar properties is not understood well.

Physicochemical analysis and intermediate pyrolysis of Bambara Groundnut Shell (BGS), Sweet Sorghum Stalk (SSS), and Shea Nutshell (SNS).

The current work focused on the intermediate pyrolysis of Bambara Groundnut Shells (BGS-G1), Sweet Sorghum Stalk (SSS), and Shea Nutshells (SNS). These feedstocks are readily available as wastes or by-products from industrial and agricultural activities. The thermo-gravimetric analysis of the biomass samples exhibited decomposition and devolatilization potentials in the temperature range of 110-650°C.

Synthesis of a highly recoverable 3D MnO/rGO hybrid aerogel for efficient adsorptive separation of pharmaceutical residue.

Water contamination by non-steroidal anti-inflammatory drugs, such as acetaminophen, is an emerging ecological concern. In this study, a new three-dimensional manganese dioxide-engrafted reduced graphene oxide (3D MnO/rGO) hybrid aerogel was developed for acetaminophen sequestration. The synthesis involved firstly the self-assembly of GO aerogel, followed by thermal reduction and in-situ MnO growth by redox-reaction.

Utilisation of environmentally friendly okara-based biosorbent for cadmium(II) removal.

Heavy metals released by various industries are among the major pollutants found in water resources. In this research, biosorption technique was employed to remove cadmium (Cd) from an aqueous system using a novel biosorbent developed from okara waste (OW), a residue from soya bean-based food and beverage processing. Characterisation results revealed that the OW biosorbent contained functional groups such as hydroxyl-, carboxyl- and sulphur-based functional groups, and the surface of the biosorbent was rough with multiple fissures which might be the binding sites for the pollutant.

Facile synthesis of xanthan biopolymer integrated 3D hierarchical graphene oxide/titanium dioxide composite for adsorptive lead removal in wastewater.

Xanthan integrated graphene oxide functionalized by titanium dioxide was successfully prepared through facile, eco-friendly and cost effective ice-templating technique. The three-dimensional (3D) graphene composite demonstrated relatively high temperature stability, chemical functionalities and porous sponge-like structure. The adsorption of lead was favored by high initial concentration and shaking speed at the operational solution pH.

Effect of oxide catalysts on the properties of bio-oil from in-situ catalytic pyrolysis of palm empty fruit bunch fiber.

Fast pyrolysis is a potential technology for converting lignocellulosic biomass into bio-oil. Nevertheless, the high amounts of acid, oxygenated compounds, and water content diminish the energy density of the bio-oil and cause it to be unsuitable for direct usage. Catalytic fast pyrolysis (CFP) is able to improve bio-oil properties so that downstream upgrading processes can be economically feasible.

Environmental application of three-dimensional graphene materials as adsorbents for dyes and heavy metals: Review on ice-templating method and adsorption mechanisms.

The remediation of wastewater requires treatment technologies which are robust, efficient, simple to operate and affordable such as adsorption. Lately, three-dimensional (3D) graphene based materials have attracted significant attention as effective adsorbents for wastewater treatment. The intrinsic properties of 3D graphene structure such as large surface area and interconnected porous structure can facilitate the transport of pollutants into the 3D network and provide abundant active sites for trapping the pollutants.

Ice-templated graphene oxide/chitosan aerogel as an effective adsorbent for sequestration of metanil yellow dye.

Graphene oxide/chitosan aerogel (GOCA) was prepared by a facile ice-templating technique without using any cross-linking reagent for metanil yellow dye sequestration. The adsorption performance of GOCA was investigated by varying the adsorbent mass, shaking speed, initial pH, contact time, concentration and temperature. The combined effects of adsorption parameters and the optimum conditions for dye removal were determined by response surface methodology.

Adsorptive decontamination of diclofenac by three-dimensional graphene-based adsorbent: Response surface methodology, adsorption equilibrium, kinetic and thermodynamic studies.

Pharmaceutical residues are emerging pollutants in the aquatic environment and their removal by conventional wastewater treatment methods has proven to be ineffective. This research aimed to develop a three-dimensional reduced graphene oxide aerogel (rGOA) for the removal of diclofenac in aqueous solution. The preparation of rGOA involved facile self-assembly of graphene oxide under a reductive environment of L-ascorbic acid.

Multistage optimizations of slow pyrolysis synthesis of biochar from palm oil sludge for adsorption of lead.

This research investigated the removal of lead (Pb) by a novel biochar derived from palm oil sludge (POS-char) by slow pyrolysis. Multistage optimizations with central composite design were carried out to firstly optimize pyrolysis parameters to produce the best POS-char for Pb removal and secondly to optimize adsorption conditions for the highest removal of Pb. The optimum pyrolysis parameters were nitrogen flowrateof30mLmin, heating rateof10°Cmin, temperatureof500°C and timeof30min.

Assessment of fish scales waste as a low cost and eco-friendly adsorbent for removal of an azo dye: Equilibrium, kinetic and thermodynamic studies.

In this study, AB113 dye was successfully sequestered using a novel adsorbent made of mixed fish scales (MFS). The influence of adsorbent dosage, initial pH, temperature, initial concentration and contact time on the adsorption performance was investigated. The surface chemistry and morphology of the adsorbent were examined by FTIR, TGA and SEM.

Biochar potential evaluation of palm oil wastes through slow pyrolysis: Thermochemical characterization and pyrolytic kinetic studies.

This research investigated the potential of palm kernel shell (PKS), empty fruit bunch (EFB) and palm oil sludge (POS), abundantly available agricultural wastes, as feedstock for biochar production by slow pyrolysis (50mLmin N at 500°C). Various characterization tests were performed to establish the thermochemical properties of the feedstocks and obtained biochars. PKS and EFB had higher lignin, volatiles, carbon and HHV, and lower ash than POS.

Utilization of palm oil sludge through pyrolysis for bio-oil and bio-char production.

In this study, pyrolysis technique was utilized for converting palm oil sludge to value added materials: bio-oil (liquid fuel) and bio-char (soil amendment). The bio-oil yield obtained was 27.4±1.

Catalytic pyrolysis of green algae for hydrocarbon production using H+ZSM-5 catalyst.

Microalgae are considered as an intriguing candidate for biofuel production due to their high biomass yield. Studies on bio-oil production through fast pyrolysis and upgrading to hydrocarbon fuels using algal biomass are limited as compared to other terrestrial biomass. Therefore, in this study, a fresh water green alga, Chlorella vulgaris, was taken for pyrolysis study.

Production of hydrocarbon fuels from biomass using catalytic pyrolysis under helium and hydrogen environments.

This study is focused on hydrocarbon production through changing carrier gas and using zeolite catalysts during pyrolysis. A large reduction in high molecular weight, oxygenated compounds was noticed when the carrier gas was changed from helium to hydrogen during pyrolysis. A catalytic pyrolysis was conducted using two different methods based on how the biomass and catalysts were contacted together.

Physiochemical properties of bio-oil produced at various temperatures from pine wood using an auger reactor.

A fast pyrolysis process produces a high yield of liquid (a.k.a.