Glucose driven self-sustained electro-Fenton platform for remediation of 2,4-dichlorophenoxy herbicide contaminated water.

As electrochemical oxidation technologies are energy-intensive, they are sparsely included in wastewater treatment plants. This study demonstrates a self-reliable glucose driven-electro-Fenton (GD-EF) system for decontamination of 2,4-dichlorophenoxy (2,4-D) herbicides without the supply of external current or voltage. It incorporates a cathode (graphite) which accepts electrons from abiotic glucose oxidation at anode (Pt/Ti or BDD or PbO/Cu/Ti) and generates HO.

OPAC (orange peel activated carbon) derived from waste orange peel for the adsorption of chlorophenoxyacetic acid herbicides from water: Adsorption isotherm, kinetic modelling and thermodynamic studies.

This study presents the orange peel activated carbon (OPAC), derived from biowaste precursor (orange peel) by single step pyrolysis method and its application for the adsorption of chlorophenoxyacetic acid herbicides from the water. The OPAC exhibited the surface area of 592.471 m g, pore volume and pore diameter of 0.

Eco-friendly and facile integrated biological-cum-photo assisted electrooxidation process for degradation of textile wastewater.

The present article reports an integrated treatment method viz biodegradation followed by photo-assisted electrooxidation, as a new approach, for the abatement of textile wastewater. In the first stage of the integrated treatment scheme, the chemical oxygen demand (COD) of the real textile effluent was reduced by a biodegradation process using hydrogels of cellulose-degrading Bacillus cereus. The bio-treated effluent was then subjected to the second stage of the integrated scheme viz indirect electrooxidation (InDEO) as well as photo-assisted indirect electro oxidation (P-InDEO) process using Ti/IrO2-RuO2-TiO2 and Ti as electrodes and applying a current density of 20 mA cm(-2).

Graphene-a promising material for removal of perchlorate (ClO4-) from water.

A batch adsorption process was applied to investigate the removal of perchlorate (ClO4 (-)) from water by graphene. In doing so, the thermodynamic adsorption isotherm and kinetic studies were also carried out. Graphene was prepared by a facile liquid-phase exfoliation.

Electrocoagulation studies on the removal of copper from water using mild steel electrode.

This study provides an electrocoagulation process for the removal of copper from water using mild steel and stainless steel as anode and cathode, respectively. The effect of different operating parameters and coexisting ions on the removal efficiency of copperwas investigated. The results showed that the optimum removal efficiency of 97.

Recovery of hydrogen and removal of nitrate from water by electrocoagulation process.

The present study provides an optimization of electrocoagulation process for the recovery of hydrogen and removal of nitrate from water. In doing so, the thermodynamic, adsorption isotherm, and kinetic studies were also carried out. Aluminum alloy of size 2 dm(2) was used as anode and as cathode.

Oxidized multiwalled carbon nanotubes as adsorbent for the removal of manganese from aqueous solution.

A batch adsorption process was applied to investigate the removal of manganese from aqueous solution by oxidized multiwalled carbon nanotubes (MWCNTs). In doing so, the thermodynamic, adsorption isotherm, and kinetic studies were also carried out. MWCNT with 5-10-nm outer diameter, surface area of 40-600 m(2)/g, and purity above 95 % was used as an adsorbent.

Removal of copper from water by electrocoagulation process--effect of alternating current (AC) and direct current (DC).

Unlabelled: PURPOSE AND AIM: In general, direct current (DC) is used in an electrocoagulation processes. In this case, an impermeable oxide layer may form on the cathode as well as corrosion formation on the anode due to oxidation. This prevents the effective current transfer between the anode and cathode, so the efficiency of electrocoagulation processes declines.

Optimization of electrocoagulation process for the simultaneous removal of mercury, lead, and nickel from contaminated water.

Unlabelled: PURPOSE AND AIM: The present study provides an optimization of electrocoagulation process for the simultaneous removal of heavy metals such as mercury, lead, and nickel from water. In doing so, the thermodynamic, adsorption isotherm and kinetic studies were also carried out.

Materials And Methods: Magnesium alloy, magnesium, aluminum, and mild steel sheet of size 2 dm(2) were used as anode and galvanized iron as cathode.

Effects of alternating and direct current in electrocoagulation process on the removal of cadmium from water.

In practice, direct current (DC) is used in an electrocoagulation processes. In this case, an impermeable oxide layer may form on the cathode as well as corrosion formation on the anode due to oxidation. This prevents the effective current transfer between the anode and cathode, so the efficiency of electrocoagulation processes declines.

Nitrate reduction in water: influence of the addition of a second metal on the performances of the Pd/CeO(2) catalyst.

An attempt is made to improve the catalytic nitrate reduction on Pd/CeO(2) catalysts by the addition of a second metal. The influence of the second metal such as Sn, In and Ag on the Pd/CeO(2) for nitrate reduction is explored. The second metal is introduced over monometallic Pd/CeO(2) by a redox reaction.

Remediation of phosphate-contaminated water by electrocoagulation with aluminium, aluminium alloy and mild steel anodes.

The present study provides an electrocoagulation process for the remediation of phosphate-contaminated water using aluminium, aluminium alloy and mild steel as the anodes and stainless steel as the cathode. The various parameters like effect of anode materials, effect of pH, concentration of phosphate, current density, temperature and co-existing ions, and so forth, and the adsorption capacity was evaluated using both Freundlich and Langmuir isotherm models. The adsorption of phosphate preferably fitting the Langmuir adsorption isotherm suggests monolayer coverage of adsorbed molecules.