Evaluating wipe sampling parameters to assess method performance and data confidence during remediation of hazardous pesticide misuse chemicals on indoor materials.

Pesticide misuse incidents are reported worldwide each year. The potential exposure to pesticides creates a concern for occupants in affected homes, apartments, and other occupied buildings. Pesticides that are improperly applied within these locations may require remediation prior to reoccupation.

Evaluating risk, exposure, and detection capabilities for chemical threats in water.

The unexpected release of chemicals into the environment requires estimation of human health risks, followed by risk management decisions. When environmental concentrations of toxicants are associated with adverse health risks, the limit for analytical measurement needs to be at or below the risk threshold. The aim of this study was to assess chemical contaminants that have the potential to produce acute adverse human health impacts following oral consumption of contaminated drinking water.

Formaldehyde Vapor Characteristics in Varied Decontamination Environments.

Introduction: This effort investigated formaldehyde vapor characteristics under various environmental conditions by the analyses of air samples collected over a time-course. This knowledge will help responders achieve desired formaldehyde exposure parameters for decontamination of affected spaces after a biological contamination incident.

Methods: Prescribed masses of paraformaldehyde and formalin were sublimated or evaporated, respectively, to generate formaldehyde vapor.

Decontamination of Spores with Formaldehyde Vapor under Varied Environmental Conditions.

Introduction: This study investigated formaldehyde decontamination efficacy against dried spores on porous and non-porous test surfaces, under various environmental conditions. This knowledge will help responders determine effective formaldehyde exposure parameters to decontaminate affected spaces following a biological agent release.

Methods: Prescribed masses of paraformaldehyde or formalin were sublimated or evaporated, respectively, to generate formaldehyde vapor within a bench-scale test chamber.

Direct aqueous injection of the fluoroacetate anion in potable water for analysis by liquid chromatography tandem mass-spectrometry.

Sodium fluoroacetate or Compound 1080 is a rodenticide registered in the United States for use in livestock protection collars. The collars are employed to control predation on herd animals (i.e.

The impact of wipe sampling variables on method performance associated with indoor pesticide misuse and highly contaminated areas.

Pesticide misuse incidents in residential indoor areas are typically associated with misapplications that are inconsistent with the label directions of the product. Surface wipe sampling and analysis procedures are relied upon to evaluate the extent of indoor contamination and the remediation efforts successfully. In general, surface wipe sampling procedures are widely varied, which can complicate the comparison of the results and data interpretation.

Advanced Oxidation of Tartrazine and Brilliant Blue with Pulsed Ultraviolet Light Emitting Diodes.

  This study investigated the effect of ultraviolet light-emitting diodes (UVLEDs) coupled with hydrogen peroxide as an advanced oxidation process (AOP) for the degradation of two test chemicals. Brilliant Blue FCF consistently exhibited greater degradation than tartrazine, with 83% degradation after 300 minutes at the 100% duty cycle compared with only 17% degradation of tartrazine under the same conditions. These differences are attributable to the structural properties of the compounds.

HYPERSPECTRAL ANALYSIS FOR STANDOFF DETECTION OF DIMETHYL METHYLPHOSPHONATE ON BUILDING MATERIALS.

Detecting organophosphates in indoor settings can greatly benefit from more efficient and faster methods of surveying large surface areas than conventional approaches, which sample small surface areas followed by extraction and analysis. This study examined a standoff detection technique utilizing hyperspectral imaging for analysis of building materials in near-real time. In this proof-of-concept study, dimethyl methylphosphonate (DMMP) was applied to stainless steel and laminate coupons and spectra were collected during active illumination.

Advanced oxidation degradation kinetics as a function of ultraviolet LED duty cycle.

Ultraviolet (UV) light emitting diodes (LEDs) may be a viable option as a UV light source for advanced oxidation processes (AOPs) utilizing photocatalysts or oxidizing agents such as hydrogen peroxide. The effect of UV-LED duty cycle, expressed as the percentage of time the LED is powered, was investigated in an AOP with hydrogen peroxide, using methylene blue (MB) to assess contaminant degradation. The UV-LED AOP degraded the MB at all duty cycles.

Investigation of the persistence of nerve agent degradation analytes on surfaces through wipe sampling and detection with ultrahigh performance liquid chromatography-tandem mass spectrometry.

The persistence of chemical warfare nerve agent degradation analytes on surfaces is important, from indicating the presence of nerve agent on a surface to guiding environmental restoration of a site after a release. Persistence was investigated for several chemical warfare nerve agent degradation analytes on indoor surfaces and presents an approach for wipe sampling of surfaces, followed by wipe extraction and liquid chromatography-tandem mass spectrometry detection. Commercially available wipe materials were investigated to determine optimal wipe recoveries.

Fate of malathion and a phosphonic acid in activated sludge with varying solids retention times.

This study examined the ability of activated sludge (AS) to sorb and biodegrade ethylmethylphosphonic acid (EMPA) and malathion, a degradation product and surrogate, respectively, for an organophosphate chemical warfare agent. Sorption equilibrium isotherm experiments indicate that sorption of EMPA and malathion to AS is negligible. EMPA at a concentration of 1 mg L(-1) degraded by approximately 30% with apparent first-order kinetics, possibly via co-metabolism from nitrification.

Analysis of environmental contamination resulting from catastrophic incidents: part 2. Building laboratory capability by selecting and developing analytical methodologies.

Catastrophic incidents can generate a large number of samples of analytically diverse types, including forensic, clinical, environmental, food, and others. Environmental samples include water, wastewater, soil, air, urban building and infrastructure materials, and surface residue. Such samples may arise not only from contamination from the incident but also from the multitude of activities surrounding the response to the incident, including decontamination.

Wipe selection for the analysis of surface materials containing chemical warfare agent nitrogen mustard degradation products by ultra-high pressure liquid chromatography-tandem mass spectrometry.

Degradation products arising from nitrogen mustard chemical warfare agent were deposited on common urban surfaces and determined via surface wiping, wipe extraction, and liquid chromatography–tandem mass spectrometry detection. Wipes investigated included cotton gauze, glass fiber filter, non-woven polyester fiber and filter paper, and surfaces included several porous (vinyl tile, painted drywall, wood) and mostly non-porous (laminate, galvanized steel, glass) surfaces. Wipe extracts were analyzed by ultra-high pressure liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) and compared with high performance liquid chromatography–tandem mass spectrometry (HPLC–MS/MS) results.

Platinum(II) molecular triangle with a deep intramolecular cavity.

Depending on the conditions, the reaction of K 2PtCl 4 with 1,3-bis( N-pyrazolyl)benzene (bpzphH) yields either Pt(bpzph)Cl, [Pt(mu-bpzph)Cl] 3, or a mixture of these products. In the case of the C 3-symmetric trimer, each bpzph (-) ligand is bidentate with the metal bonded to a pyrazolyl group and to the phenyl group at the 6 position; the remaining pyrazolyl group bridges to an adjacent platinum center. The crystal structure confirms that each complex is chiral with an unusually deep (approximately 8 A) intramolecular cavity; enantiomeric pairs of trimers encapsulate the diethyl ether solvate.

A luminescent platinum(II) 2,6-bis(N-pyrazolyl)pyridine complex.

Four platinum(II) cationic complexes were prepared with the mer-coordinating tridentate ligands 2,6-bis(N-pyrazolyl)pyridine (bpp) and 2,6-bis(3,5-dimethyl-N-pyrazolyl)pyridine (bdmpp): [Pt(bpp)Cl]Cl.H(2)O; [Pt(bdmpp)Cl]Cl.H(2)O; [Pt(bpp)(Ph)](PF(6)); [Pt(bdmpp)(Ph)](PF(6)).