Bonded labour and donkey ownership in the brick kilns of India: A need for reform of policy and practice.

Slavery, in the form of 'debt-bondage', is rife in Indian brick kilns, where the enforcement of labour laws is poor. Working equids support brick-kiln workers by transporting raw bricks into the kilns, but the situation of equids and their owners within the brick kilns is relatively unknown. We describe the welfare of donkeys () owned under conditions of debt-bondage, examine the links between owner and donkey behaviour, and outline the living conditions of both donkeys and humans working in the brick kilns of Gujarat, India.

"Not All Who Wander Are Lost": The Life Transitions and Associated Welfare of Pack Mules Walking the Trails in the Mountainous Gorkha Region, Nepal.

Equids in general experience transient lives where ownership may change multiple times, for working equids this can be more extreme where ownership changes are not only numerous but abrupt, and situations encountered prove difficult, diverse and tough for equids to adapt. In this study, we investigate the life cycle of pack mules in Nepal, investigating the challenges they face during their lives through to end of life. To gain insight into the lives of mules, we conducted semi-structured interviews and livelihood surveys with 27 key informants, gathering the perspectives of the people working with mules.

Collar pressure mapping: An evaluation of seven collar types used on working donkeys in Europe.

Background: Working donkeys represent an important source of energy worldwide. Poor working conditions and equipment affect their ability to work. Poorly designed, ill-fitted harness causes inefficient transfer of power and leads to health and welfare issues.

Global donkey and mule populations: Figures and trends.

Knowing how many donkeys there are in specific countries where welfare is compromised is a key concern for targeting efforts to improve donkey welfare. Additionally, accurate population estimates are vital for providing evidence and addressing the impact of population threats. The FAO annually report the number of donkeys and mules in each country.

Quantifying poor working equid welfare in Nepalese brick kilns using a welfare assessment tool.

Background: Across Asia the brick-kiln industry is expanding. In Nepal, urban dwelling has increased in recent years, raising requirement for low-cost, mass produced bricks to meet the population needs. Working equids (WEs) play a key role in non-mechanised kilns.

A New Framework for Assessing Equid Welfare: A Case Study of Working Equids in Nepalese Brick Kilns.

Equids fulfil many different roles within communities. In low- to middle-income countries (LMICs), in addition to providing a source of income, equids also provide essential transport of food, water, and goods to resource-limited and/or isolated communities that might otherwise lack access. The aim of this investigation was to understand the welfare conditions that donkeys, mules, and horses are exposed to whilst working in Nepalese brick kilns.

The Welfare Aggregation and Guidance (WAG) Tool: A New Method to Summarize Global Welfare Assessment Data for Equids.

Animal welfare can be represented by an array of indicators. There is, however, increasing demand for concise welfare assessments that can be easily communicated and compared. Previous methods to aggregate welfare assessments have focused on livestock systems and produced a single welfare score, which may not represent all aspects of welfare.

Equid Assessment, Research and Scoping (EARS): The Development and Implementation of a New Equid Welfare Assessment and Monitoring Tool.

The assessment of animal welfare poses numerous challenges, yet an emerging approach is the consolidation of existing knowledge into new frameworks which can offer standardised approaches to welfare assessment across a variety of contexts. Multiple tools exist for measuring the welfare of equids, but such tools have typically been developed for specific contexts. There is no 'one size fits all' which means that resulting datasets are generally non-comparable, creating a barrier to knowledge-sharing and collaboration between the many organisations working to improve equid welfare around the globe.

Experimental investigation of the effect of temperature differentials on hydraulic performance and flow pattern of a sediment retention pond.

Existing studies on sediment retention ponds (SRPs) have examined the effects of pond layout, inlet and outlet geometry and the installation of baffles on the performance of the SRPs. However, the effects of a temperature difference between the ambient water in the pond and the inflow are often neglected, and the buoyancy forces arising from these differences in temperature can potentially change the flow in the pond and hence its hydraulic performance. This study has experimentally evaluated the effect of these temperature differences on the flow field and residence time in a retention pond for a range of temperature differences.

Impact of Grassland Reseeding, Herbicide Spraying and Ploughing on Diversity and Abundance of Soil Arthropods.

In order to determine the interactive effect of reseeding, herbicide spraying and ploughing on soil fauna communities, we conducted a grassland reseeding experiment combined with pre-reseed management to examine how with the whole reseeding process affects soil faunal composition. Sampling occasions and exact treatments were as follows: (1) before chemical herbicide spray; (2) after spray but before ploughing; (3) after ploughing but before reseeding; and (4) after 1 year of recovery. Our results demonstrate that, Acari and Collembola were the two soil fauna taxa with the highest abundance and accounted for around 96% of the relative total abundance among the various managements.

Impact of bifurcation angle and other anatomical characteristics on blood flow - A computational study of non-stented and stented coronary arteries.

The hemodynamic influence of vessel shape such as bifurcation angle is not fully understood with clinical and quantitative observations being equivocal. The aim of this study is to use computational modeling to study the hemodynamic effect of shape characteristics, in particular bifurcation angle (BA), for non-stented and stented coronary arteries. Nine bifurcations with angles of 40°, 60° and 80°, representative of ±1 SD of 101 asymptomatic computed tomography angiogram cases (average age 54±8 years; 57 females), were generated for (1) a non-stented idealized, (2) stented idealized, and (3) non-stented patient-specific geometry.

Dynamically scaled phantom phase contrast MRI compared to true-scale computational modeling of coronary artery flow.

Purpose: To examine the feasibility of combining computational fluid dynamics (CFD) and dynamically scaled phantom phase-contrast magnetic resonance imaging (PC-MRI) for coronary flow assessment.

Materials And Methods: Left main coronary bifurcations segmented from computed tomography with bifurcation angles of 33°, 68°, and 117° were scaled-up ∼7× and 3D printed. Steady coronary flow was reproduced in these phantoms using the principle of dynamic similarity to preserve the true-scale Reynolds number, using blood analog fluid and a pump circuit in a 3T MRI scanner.

Overcoming spatio-temporal limitations using dynamically scaled in vitro PC-MRI - A flow field comparison to true-scale computer simulations of idealized, stented and patient-specific left main bifurcations.

The majority of patients with angina or heart failure have coronary artery disease. Left main bifurcations are particularly susceptible to pathological narrowing. Flow is a major factor of atheroma development, but limitations in imaging technology such as spatio-temporal resolution, signal-to-noise ratio (SNRv), and imaging artefacts prevent in vivo investigations.

Hemodynamics in Idealized Stented Coronary Arteries: Important Stent Design Considerations.

Stent induced hemodynamic changes in the coronary arteries are associated with higher risk of adverse clinical outcome. The purpose of this study was to evaluate the impact of stent design on wall shear stress (WSS), time average WSS, and WSS gradient (WSSG), in idealized stent geometries using computational fluid dynamics. Strut spacing, thickness, luminal protrusion, and malapposition were systematically investigated and a comparison made between two commercially available stents (Omega and Biomatrix).

The flow fields involved in hydrodynamic imaging by blind Mexican cave fish (Astyanax fasciatus). Part II: gliding parallel to a wall.

Blind Mexican cave fish (Astyanax fasciatus) are able to sense detailed information about objects by gliding alongside them and sensing changes in the flow field around their body using their lateral line sensory system. Hence the fish are able to build hydrodynamic images of their surroundings. This study measured the flow fields around blind cave fish using particle image velocimetry (PIV) as they swam parallel to a wall.

The flow fields involved in hydrodynamic imaging by blind Mexican cave fish (Astyanax fasciatus). Part I: open water and heading towards a wall.

Blind Mexican cave fish (Astyanax fasciatus) sense the presence of nearby objects by sensing changes in the water flow around their body. The information available to the fish using this hydrodynamic imaging ability depends on the properties of the flow field it generates while gliding and how this flow field is altered by the presence of objects. Here, we used particle image velocimetry to measure the flow fields around gliding blind cave fish as they moved through open water and when heading towards a wall.

Device management winning formula.

The progressive development of an electronic-biomedical engineering (EBME) department at Bedford Hospital NHS Trust is providing many outstanding benefits. Nicholas Marshall reports.