A facile one step route that introduces functionality to polymer powders for laser sintering.

Laser Sintering (LS) is a type of Additive Manufacturing (AM) exploiting laser processing of polymeric particles to produce 3D objects. Because of its ease of processability and thermo-physical properties, polyamide-12 (PA-12) represents ~95% of the polymeric materials used in LS. This constrains the functionality of the items produced, including limited available colours.

Glycerol- and diglycerol-based polyesters: Evaluation of backbone alterations upon nano-formulation performance.

Despite the success of polyethylene glycol-based (PEGylated) polyesters in the drug delivery and biomedical fields, concerns have arisen regarding PEG's immunogenicity and limited biodegradability. In addition, inherent limitations, including limited chemical handles as well as highly hydrophobic nature, can restrict their effectiveness in physiological conditions of the polyester counterpart. To address these matters, an increasing amount of research has been focused towards identifying alternatives to PEG.

Glycerol-based sustainably sourced resin for volumetric printing.

Volumetric Additive Manufacturing (VAM) represents a revolutionary advancement in the field of Additive Manufacturing, as it allows for the creation of objects in a single, cohesive process, rather than in a layer-by-layer approach. This innovative technique offers unparalleled design freedom and significantly reduces printing times. A current limitation of VAM is the availability of suitable resins with the required photoreactive chemistry and from sustainable sources.

Synthesis of core-shell polymer particles in supercritical carbon dioxide iterative monomer addition.

A new, robust methodology for the synthesis of polystyrene-poly(methyl methacrylate) (PS-PMMA) core-shell particles using seeded dispersion polymerisation in supercritical carbon dioxide is reported, where the core-shell ratio can be controlled predictably manipulation of reagent stoichiometry. The key development is the application of an iterative addition of the MMA shell monomer to the pre-prepared PS core. Analysis of the materials with differing core-shell ratios indicates that all are isolated as single particle populations with distinct and controllable core-shell morphologies.

Poly (diglycerol adipate) variants as enhanced nanocarrier replacements in drug delivery applications.

Sustainably derived poly(glycerol adipate) (PGA) has been deemed to deliver all the desirable features expected in a polymeric scaffold for drug-delivery, including biodegradability, biocompatibility, self-assembly into nanoparticles (NPs) and a functionalisable pendant group. Despite showing these advantages over commercial alkyl polyesters, PGA suffers from a series of key drawbacks caused by poor amphiphilic balance. This leads to weak drug-polymer interactions and subsequent low drug-loading in NPs, as well as low NPs stability.

Evaluation of two terpene-derived polymers as consolidants for archaeological wood.

The evaluation of two terpene-derived polymers, termed TPA6 and TPA7, as possible consolidants for archaeological wood was carried out. The overall objective of this work was to expand the non-aqueous treatment toolkit which is available for the conservation of the highly degraded Oseberg collection. The wood artefacts which were found on the Oseberg ship were treated with alum in the early twentieth century, leading to the formation of sulfuric acid and to the precarious state that they are in today.

Predictive Molecular Design and Structure-Property Validation of Novel Terpene-Based, Sustainably Sourced Bacterial Biofilm-Resistant Materials.

Presented in this work is the use of a molecular descriptor, termed the α parameter, to aid in the design of a series of novel, terpene-based, and sustainable polymers that were resistant to biofilm formation by the model bacterial pathogen . To achieve this, the potential of a range of recently reported, terpene-derived monomers to deliver biofilm resistance when polymerized was both predicted and ranked by the application of the α parameter to key features in their molecular structures. These monomers were derived from commercially available terpenes (, α-pinene, β-pinene, and carvone), and the prediction of the biofilm resistance properties of the resultant novel (meth)acrylate polymers was confirmed using a combination of high-throughput polymerization screening (in a microarray format) and testing.

Comparative hydrodynamic characterisation of two hydroxylated polymers based on α-pinene- or oleic acid-derived monomers for potential use as archaeological consolidants.

The Oseberg Viking ship burial is one of the most extensive collections of Viking wooden artefacts ever excavated in Norway. In the early twentieth century, many of these artefacts were treated with alum in order to preserve them, inadvertently leading to their current degraded state. It is therefore crucial to develop new bioinspired polymers which could be used to conserve these artefacts and prevent further disintegration.

Passerini chemistries for synthesis of polymer pro-drug and polymersome drug delivery nanoparticles.

New materials chemistries are urgently needed to overcome the limitations of existing biomedical materials in terms of preparation, functionality and versatility, and also in regards to their compatibility with biological environments. Here, we show that Passerini reactions are especially suited for the preparation of drug delivery materials, as with relatively few steps, polymers can be synthesized with functionality installed enabling drug conjugation and encapsulation, self-assembly into micellar or vesicular architectures, and with facile attachment triggerable chemistries. The polymers can be made with a variety of building blocks and assemble into nanoparticles, which are rapidly internalized in triple negative breast cancer (TNBC) cells.

Influence of structure and solubility of chain transfer agents on the RAFT control of dispersion polymerisation in scCO.

Reversible addition-fragmentation chain transfer (RAFT) dispersion polymerisation of methyl methacrylate (MMA) is performed in supercritical carbon dioxide (scCO) with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight. Kinetic studies of the polymerisation in scCO also confirm these data. By contrast, only poor control of MMA polymerisation is obtained in toluene solution, as would be expected for this CTA which is better suited for acrylates.

Synthesis of water-soluble surfactants using catalysed condensation polymerisation in green reaction media.

Sustainable and biobased surfactants are required for a wide range of everyday applications. Key drivers are cost, activity and efficiency of production. Polycondensation is an excellent route to build surfactant chains from bio-sourced monomers, but this typically requires high processing temperatures (≥200 °C) to remove the condensate and to lower viscosity of the polymer melt.

Functionalisable Epoxy-rich Electrospun Fibres Based on Renewable Terpene for Multi-Purpose Applications.

New bio-based polymers capable of either outperforming fossil-based alternatives or possessing new properties and functionalities are of relevant interest in the framework of the circular economy. In this work, a novel bio-based polycarvone acrylate di-epoxide (PCADE) was used as an additive in a one-step straightforward electrospinning process to endow the fibres with functionalisable epoxy groups at their surface. To demonstrate the feasibility of the approach, poly(vinylidene fluoride) (PVDF) fibres loaded with different amounts of PCADE were prepared.

Terpene polyacrylate TPA5 shows favorable molecular hydrodynamic properties as a potential bioinspired archaeological wood consolidant.

There is currently a pressing need for the development of novel bioinspired consolidants for waterlogged, archaeological wood. Bioinspired materials possess many advantages, such as biocompatibility and sustainability, which makes them ideal to use in this capacity. Based on this, a polyhydroxylated monomer was synthesised from α-pinene, a sustainable terpene feedstock derived from pine trees, and used to prepare a low molar mass polymer TPA5 through free radical polymerisation.

Amylose/cellulose nanofiber composites for all-natural, fully biodegradable and flexible bioplastics.

Thermoplastic, polysaccharide-based plastics are environmentally friendly. However, typical shortcomings include lack of water resistance and poor mechanical properties. Nanocomposite manufacturing using pure, highly linear, polysaccharides can overcome such limitations.

Synthesis of Passerini-3CR Polymers and Assembly into Cytocompatible Polymersomes.

The versatility of the Passerini three component reaction (Passerini-3CR) is herein exploited for the synthesis of an amphiphilic diblock copolymer, which self-assembles into polymersomes. Carboxy-functionalized poly(ethylene glycol) methyl ether is reacted with AB-type bifunctional monomers and tert-butyl isocyanide in a single process via Passerini-3CR. The resultant diblock copolymer (P1) is obtained in good yield and molar mass dispersity and is well tolerated in model cell lines.

Epoxy-amine oligomers from terpenes with applications in synergistic antifungal treatments.

A bis-epoxide monomer was synthesised in two steps from (R)-carvone, a terpenoid renewable feedstock derived from spearmint oil, and used to prepare β-aminoalcohol oligomers in polyaddition reactions with bis-amines without requiring solvent or catalyst. A sub-set of the resultant materials were readily water soluble and were investigated for antifungal activity in combination with the fungicide iodopropynyl-butylcarbamate (IPBC) or the antifungal drug amphotericin B. The oligo-(β-aminoalcohol)s alone were inactive against Trichoderma virens and Candida albicans but in combination with IPBC and amphotericin B demonstrated synergistic growth-inhibition of both fungi.

Polyacrylates Derived from Biobased Ethyl Lactate Solvent via SET-LRP.

The precise synthesis of polymers derived from alkyl lactate ester acrylates is reported for the first time. Kinetic experiments were conducted to demonstrate that Cu(0) wire-catalyzed single electron transfer-living radical polymerization (SET-LRP) in alcohols at 25 °C provides a green methodology for the LRP of this forgotten class of biobased monomers. The acrylic derivative of ethyl lactate (EL) solvent and homologous structures with methyl and n-butyl ester were polymerized with excellent control over molecular weight, molecular weight distribution, and chain-end functionality.

Formulation of Bioerodible Ketamine Microparticles as an Analgesic Adjuvant Treatment Produced by Supercritical Fluid Polymer Encapsulation.

Pain is inadequately relieved by escalating doses of a strong opioid analgesic such as morphine in up to 25% of patients with cancer-related severe pain complicated by a neuropathic (nerve damage) component. Hence, there is an unmet medical need for research on novel painkiller strategies. In the present work, we used supercritical fluid polymer encapsulation to develop sustained-release poly(lactic--glycolic acid) (PLGA) biodegradable microparticles containing the analgesic adjuvant drug ketamine, for injection by the intrathecal route.

Clean Block Copolymer Microparticles from Supercritical CO: Universal Templates for the Facile and Scalable Fabrication of Hierarchical Mesostructured Metal Oxides.

Metal oxide microparticles with well-defined internal mesostructures are promising materials for a variety of different applications, but practical routes to such materials that allow the constituent structural length scales to be precisely tuned have thus far been difficult to realize. Herein, we describe a novel platform methodology that utilizes self-assembled block copolymer (BCP) microparticles synthesized by dispersion polymerization in supercritical CO (scCO) as universal structure directing agents for both hydrolytic and nonhydrolytic sol-gel routes to metal oxides. Spherically structured poly(methyl methacrylate- block-4-vinylpyridine) (PMMA- b-P4VP) BCP microparticles are translated into a series of the corresponding organic/inorganic composites and pure inorganic derivatives with a high degree of fidelity for the metal oxides TiO and LiFePO.

Sustained-Release Hydromorphone Microparticles Produced by Supercritical Fluid Polymer Encapsulation.

Chronic cancer pain remains prevalent and severe for many patients, particularly in those with advanced disease. The effectiveness of analgesic/adjuvant drug treatments in routine practice has changed little in the last 30 years. To address these issues herein, we have developed sustained-release poly(lactic-co-glycolic acid) microparticles of hydromorphone for intrathecal injection aimed at producing prolonged periods of satisfactory analgesia in patients, as a novel strategy for alleviation of intractable cancer-related pain.

Antimicrobial peptide encapsulation and sustained release from polymer network particles prepared in supercritical carbon dioxide.

Antimicrobial peptide loaded poly(2-hydroxyethyl methacrylate) particles were synthesized in supercritical carbon dioxide via one-pot free-radical dispersion polymerisation of 2-hydroxyethyl methacrylate and a cross-linker. Discrete particles with a well-defined spherical morphology and a diameter as low as 450 nm have been obtained in mild conditions. The encapsulation and release of the peptide were confirmed by antimicrobial tests that demonstrated for the first time a sustained release of the peptide from poly(2-hydroxyethyl methacrylate) microgels prepared by one-pot dispersion polymerization in supercritical carbon dioxide and then dispersed in water.

Sulindac encapsulation and release from functional poly(HEMA) microparticles prepared in supercritical carbon dioxide.

Sulindac loaded poly(HEMA) cross-linked microparticles were synthesized via one-pot free-radical dispersion polymerisation in supercritical carbon dioxide (scCO) in presence of photocleavable diblock stabilisers based on polyethylene oxide (PEO) and poly(heptadecafluorodecyl acrylate) (PFDA) bearing a o-nitrobenzyl photosensitive junction (hv) (PEO-hv-PFDA), and ethylene glycol dimethacrylate (EGDMA) as cross-linker. Poly(HEMA) cross-linked microparticles either empty or sulindac loaded were obtained with well-defined spherical morphology with the sizes between 250 and 350 nm. Additionally, upon UV-photolysis the stabiliser on the surface was cleaved which permits to microparticles to be redispersed in water leading to water swollen microgels about 2.

Biocompatible Unimolecular Micelles Obtained via the Passerini Reaction as Versatile Nanocarriers for Potential Medical Applications.

A Passerini three-component polymerization was performed for the synthesis of amphiphilic star-shaped block copolymers with hydrophobic cores and hydrophilic coronae. The degree of polymerization of the hydrophobic core was varied from 5 to 10 repeating units, and the side chain ends were conjugated by performing a Passerini-3CR with PEG-isocyanide and PEG-aldehyde (950 g/mol). The resulting amphiphilic star-shaped block copolymers contained thioether groups, which could be oxidized to sulfones in order to further tune the polarity of the polymer chains.

Versatile Routes to Functional RAFT Chain Transfer Agents through the Passerini Multicomponent Reaction.

The widespread adoption of RAFT polymerization stems partly from the ease and utility of installing a functional chain transfer agent onto the ends of the generated polymer chains. In parallel, the Passerini multicomponent reaction offers great versatility in converting a wide range of easily accessible building blocks to functional materials. In this work, we have combined the two approaches such that a single, commonly available, RAFT agent is used in Passerini reactions to generate a variety of multifunctional RAFT chain transfer agents containing ester linkages.