Expression of Chondrogenic Potential Markers in Cultured Chondrocytes from the Human Knee Joint.

Objectives: While substantial progress has been made in engineering cartilaginous constructs for animal models, further research is needed to translate these methodologies for human applications. Evidence suggests that cultured autologous chondrocytes undergo changes in phenotype and gene expression, thereby affecting their proliferation and differentiation capacity. This study was designed to evaluate the expression of chondrogenic markers in cultured human articular chondrocytes from passages 3 (P3) and 7 (P7), beyond the current clinical recommendation of P3.

Elevated nutrient availability enhances chondrocyte metabolism and biosynthesis in tissue-engineered cartilage.

Objective: Chondrocytes, which typically rely on anaerobic metabolism, exhibit upregulated biosynthetic activity when subjected to conditions that elicit mixed aerobic-anaerobic metabolism. Previously, we observed that increasing media volume resulted in the transition from anaerobic to mixed aerobic-anaerobic metabolism. Maximal extracellular matrix (ECM) accumulation occurred at this transition as a result of changes in hypoxia-inducible factor 1α signaling and associated hypoxic gene expression.

Passaged Articular Chondrocytes From the Superficial Zone and Deep Zone Can Regain Zone-Specific Properties After Redifferentiation.

Background: Bioengineered cartilage is a developing therapeutic to repair cartilage defects. The matrix must be rich in collagen type II and aggrecan and mechanically competent, withstanding compressive and shearing loads. Biomechanical properties in native articular cartilage depend on the zonal architecture consisting of 3 zones: superficial, middle, and deep.

C Metabolic Flux Analysis in Chondrocytes Reveals a Novel Switch in Metabolic Phenotype.

Chondrocytes are typically known for their anaerobic metabolism both and under culture conditions . However, chondrocytes have been shown to display greater biosynthetic activity when subjected to conditions that elicit aerobic metabolism. We have previously shown that tissue formation by chondrocytes can be upregulated by controlling nutrient availability and that this response arises from changes in glucose metabolism.

The role of mitochondrial reactive oxygen species in chondrocyte mechanotransduction.

Chondrocytes are mechanosensitive cells able to sense and respond to external mechanical stimuli through the process of mechanotransduction. Previous studies have demonstrated that mechanical stimulation causes mitochondrial deformation leading to mitochondrial reactive oxygen species (ROS) release in a dose-dependent manner. For this reason, we focused on elucidating the role of mitochondrial ROS as anabolic signaling molecules in chondrocyte mechanotransduction.

TRPV4 activation enhances compressive properties and glycosaminoglycan deposition of equine neocartilage sheets.

Objective: To evaluate the effect of Transient Receptor Potential Vanilloid 4 (TRPV4) cation channel modulation on mesenchymal stromal cell (MSC)-derived neocartilage.

Methods: RT-PCR was performed to evaluate mRNA levels of chondrogenic, hypertrophic and candidate mechanoresponsive genes in equine neocartilage sheets exposed to pulses of the TRPV4 agonist (GSK101) at different concentrations (N ​= ​10). Biochemical assays and mechanical tests (double indentation and unconfined compression) evaluated neocartilage properties (N ​= ​5).

Cell Cycle Synchronization of Primary and Cultured Articular Chondrocytes.

Cell cycle synchronization allows cells in a culture, originally at different stages of the cell cycle, to be brought to the same phase. It is normally performed by applying cell cycle arresting chemical agents to cells cultured in monolayer. While effective, isolated chondrocytes tend to dedifferentiate when cultured in monolayer and typically require 3D culturing methods to ensure phenotypic stability.

Lithium chloride-induced primary cilia recovery enhances biosynthetic response of chondrocytes to mechanical stimulation.

Mechanical stimulation is commonly used in cartilage tissue engineering for enhancing tissue formation and improving the mechanical properties of resulting engineered tissues. However, expanded chondrocytes tend to dedifferentiate and lose expression of their primary cilia, which is necessary for chondrocyte mechanotransduction. As treatment with lithium chloride (LiCl) can restore passaged chondrocytes in monolayer, in this study, we investigated whether this approach would be effective in 3D culture and restore chondrocyte mechanosensitivity.

Human-engineered auricular reconstruction (hEAR) by 3D-printed molding with human-derived auricular and costal chondrocytes and adipose-derived mesenchymal stem cells.

Microtia is a small, malformed external ear, which occurs at an incidence of 1-10 per 10 000 births. Autologous reconstruction using costal cartilage is the most widely accepted surgical microtia repair technique. Yet, the method involves donor-site pain and discomfort and relies on the artistic skill of the surgeon to create an aesthetic ear.

Comparative Evaluation of Two Glass Polyalkenoate Cements: An In Vivo Pilot Study Using a Sheep Model.

Poly(methyl methacrylate) (PMMA) is used to manage bone loss in revision total knee arthroplasty (rTKA). However, the application of PMMA has been associated with complications such as volumetric shrinkage, necrosis, wear debris, and loosening. Glass polyalkenoate cements (GPCs) have potential bone cementation applications.

Effect of nutrient metabolism on cartilaginous tissue formation.

A major shortcoming in cartilage tissue engineering is the low biosynthetic response of chondrocytes. While different strategies have been investigated, a novel approach may be to control nutrient metabolism. Although known for their anaerobic metabolism, chondrocytes are more synthetically active under conditions that elicit mixed aerobic-anaerobic metabolism.

Characterization of Mechanical and Dielectric Properties of Silicone Rubber.

Silicone rubber's silicone-oxygen backbones give unique material properties which are applicable in various biomedical devices. Due to the diversity of potential silicone rubber compositions, the material properties can vary widely. This paper characterizes the dielectric and mechanical properties of two different silicone rubbers, each with a different cure system, and in combination with silicone additives.

Tantalum-containing mesoporous bioactive glass powder for hemostasis.

This study evaluates the hemostatic properties of tantalum-containing mesoporous bioactive glasses (Ta-MBGs) through a suite of methods: hemolysis percentage, zeta potential, blood coagulation assays (Activated Partial Thromboplastin Time - APTT and Prothrombin Time - PT) and cytotoxicity tests. Five compositions of Ta-MBG, with mol% TaO added to the glass series (80-)SiO-15CaO-5PO-TaO where =0 (0Ta), =0.5 (0.

Calcium sulfate-containing glass polyalkenoate cement for revision total knee arthroplasty fixation.

Poly(methyl methacrylate) (PMMA) bone cement is used as a minor void filler in revision total knee arthroplasty (rTKA). The application of PMMA is indicated only for peripheral bone defects with less than 5 mm depth and that cover less than 50% of the bone surface. Treating bone defects with PMMA results in complications as a result of volumetric shrinkage, bone necrosis, and aseptic loosening.

In vitro evaluation of novel titania-containing borate bioactive glass scaffolds.

Titanium-containing borate bioactive glass scaffolds (0, 5, 15, and 20 mol %, identified as BRT0, BRT1, BRT3, and BRT4) with a microstructure similar to that of human trabecular bone were prepared and evaluated in vitro for potential bone loss applications in revision total knee arthroplasty (rTKA). Methyl thiazolyl tetrazolium (MTT) cell viability assays of scaffold ion release extracts revealed that BRT0 scaffolds (0 mol % titanium) inhibited cell proliferation and activity at day 14. At day 30, all scaffold extracts decreased cell proliferation and activity significantly.

Optimization of culture media to enhance the growth of tissue engineered cartilage.

Tissue engineering is a promising option for cartilage repair. However, several hurdles still need to be overcome to develop functional tissue constructs suitable for implantation. One of the most common challenges is the general low capacity of chondrocytes to synthesize cartilage-specific extracellular matrix (ECM).

The Role of Poly(Methyl Methacrylate) in Management of Bone Loss and Infection in Revision Total Knee Arthroplasty: A Review.

Poly(methyl methacrylate) (PMMA) is widely used in joint arthroplasty to secure an implant to the host bone. Complications including fracture, bone loss and infection might cause failure of total knee arthroplasty (TKA), resulting in the need for revision total knee arthroplasty (rTKA). The goals of this paper are: (1) to identify the most common complications, outside of sepsis, arising from the application of PMMA following rTKA, (2) to discuss the current applications and drawbacks of employing PMMA in managing bone loss, (3) to review the role of PMMA in addressing bone infection following complications in rTKA.

Effect of TiO doping on degradation rate, microstructure and strength of borate bioactive glass scaffolds.

A titanium-containing borate glass series based on the system (52-X) BO-12CaO-6PO-14NaO-16ZnO-XTiO with X varying from 0, 5 and 15 mol% of TiO incorporated, identified as BRT0, BRT1 and BRT3, respectively, were used in this study. Scaffolds (pore sizes, 165-230 μm and porosity, 53.51-69.

A review of materials for managing bone loss in revision total knee arthroplasty.

In 2014-2015, 61,421 total knee arthroplasties (TKAs) were performed in Canada; an increase of about 20% over 2000-2001. Revision total knee arthroplasties (rTKAs) accounted for 6.8% of TKAs performed between 2014 and 2015, and this is estimated to grow another 12% by 2025.

Cell Cycle Synchronization of Primary Articular Chondrocytes Enhances Chondrogenesis.

Objective: Although tissue engineering is a promising option for articular cartilage repair, it has been challenging to generate functional cartilaginous tissue. While the synthetic response of chondrocytes can be influenced by various means, most approaches treat chondrocytes as a homogeneous population that would respond similarly. However, isolated cells heterogeneously progress through the cell cycle, which can affect macromolecular biosynthesis.

Engineering of scaffold-free tri-layered auricular tissues for external ear reconstruction.

Objectives: Current strategies for external ear reconstruction can lead to donor site morbidity and/or surgical complications. Tissue-engineered auricular tissues may provide readily available reconstructive materials that resemble native auricular tissue, which is composed of a cartilaginous region sandwiched between two perichondrial layers. We previously developed scaffold-free bi-layered auricular tissues, consisting of a perichondrial layer and a cartilaginous layer, by cultivating chondrocytes and perichondrial cells in a continuous flow bioreactor.

Characterization of a novel decellularized bone marrow scaffold as an inductive environment for hematopoietic stem cells.

Due to the increasing demand for a bone marrow study model, we developed a natural scaffold from decellularized bovine bone marrow (DeBM). The obtained bioscaffold was analyzed after the decellularization process; histological staining, scanning and transmission electron microscopy confirmed the preservation of its native 3D-architecture; including blood vessels and cell niches as well as the integrity of important components of the extracellular matrix; Collagen III, IV and fibronectin. In addition to biochemical composition, physical properties of the bone marrow were also conserved.

Stochastic Resonance with Dynamic Compression Improves the Growth of Adult Chondrocytes in Agarose Gel Constructs.

Dynamic mechanical stimulation has been an effective method to improve the growth of tissue engineering cartilage constructs derived from immature cells. However, when more mature cell populations are used, results are often variable due to the differing responses of these cells to external stimuli. This can be especially detrimental in the case of mechanical loading.

Direct cell-cell communication with three-dimensional cell morphology on wrinkled microposts.

Unlabelled: Cell-cell communication plays a critical role in a myriad of processes, such as homeostasis, angiogenesis, and carcinogenesis, in multi-cellular organisms. Monolayer cell models have notably improved our understanding of cellular interactions. However, the cultured cells on the planar surfaces adopt a two-dimensional morphology, which poorly imitates cellular organization in vivo, providing physiologically-irrelevant cell responses.

Failure behaviour of rat vertebrae determined through simultaneous compression testing and micro-CT imaging.

Skeletal fractures, including those resulting from osteoporosis, result in significant healthcare and societal costs on an annual basis. Therefore, it is important to understand the mechanisms by which these fractures occur. Incremental compression testing combined with micro-CT imaging has been used to visualize the progression of failure in trabecular bone samples; however, these studies have ignored the potential contributions of the cortical shell.