Vibrational Spectroscopy as a Promising Toolbox for Analyzing Functionalized Ceramic Membranes.

Ceramic materials find use in many fields including the life sciences and environmental engineering. For example, ceramic membranes have shown to be promising filters for water treatment and virus retention. The analysis of such materials, however, remains challenging.

Supercritical CO impregnation of PLA/PCL films with natural substances for bacterial growth control in food packaging.

Biodegradable polymers with antibacterial properties are highly desirable materials for active food packaging applications. Thymol, a dietary monoterpene phenol with a strong antibacterial activity is abundant in plants belonging to the genus Thymus. This study presents two approaches for supercritical CO impregnation of poly(lactic acid)(PLA)/poly(ε-caprolactone)(PCL) blended films to induce antibacterial properties of the material: (i) a batch impregnation process for loading pure thymol, and (ii) an integrated supercritical extraction-impregnation process for isolation of thyme extract and its incorporation into the films, operated in both batch or semi-continuous modes with supercritical solution circulation.

Flow rate dependent continuous hydrolysis of protein isolates.

Food protein hydrolysates are often produced in unspecific industrial batch processes. The hydrolysates composition underlies process-related fluctuations and therefore the obtained peptide fingerprint and bioactive properties may vary. To overcome this obstacle and enable the production of specific hydrolysates with selected peptides, a ceramic capillary system was developed and characterized for the continuous production of a consistent peptide composition.

Straightforward Processing Route for the Fabrication of Robust Hierarchical Zeolite Structures.

Strong hierarchical porous zeolite structures are prepared by a sol-gel method using freeze gelation. Instead of conventional binders in powder form, such as bentonite or kaolin, it has been proven that using a freeze gelation method based on a colloidal silica sol is a more straightforward and easier-to-use-approach in fabricating highly mechanically stable zeolite monoliths. The resulting zeolite slurries possess superior rheological properties (not being pseudoplastic) and show low viscosities.

Applying Alkyl-Chain Surface Functionalizations in Mesoporous Inorganic Structures: Their Impact on Gas Flow and Selectivity Depending on Temperature.

Porous inorganic capillary membranes are prepared to serve as model structures for the experimental investigation of the gas transport in functionalized mesopores. The porous structures possess a mean pore diameter of 23 nm which is slightly reduced to 20 nm after immobilizing C-alkyl chains on the surface. Gas permeation measurements are performed at temperatures ranging from 0 to 80 °C using Ar, N, and CO.

Amino-Functionalized Ceramic Capillary Membranes for Controlled Virus Retention.

A straightforward chemical functionalization strategy using aminosilanes for high-flux yttria-stabilized zirconia capillary membranes is presented (macroporous, d50 = 144 nm, open porosity =49%, membrane flux ∼150 L/(m(2)hbar)). Three different aminosilanes with one, two or three amino groups per silane molecule, namely 3-aminopropyltriethoxysilane (APTES), N-(2-aminoethyl)-3-aminopropyltriethoxysilane (AE-APTES) and N-(3-trimethoxysilylpropyl)diethylenetriamine (TPDA), are used to generate the amino-functionalized membranes. With a higher number of amino groups per silane molecule increased loading capacities between 0.

Hierarchical Porous Zeolite Structures for Pressure Swing Adsorption Applications.

Porous adsorbents with hierarchical structured macropores ranging from 1 to 100 μm are prepared using a combination of freeze casting and additional sacrificial templating of polyurethane foams, with a zeolite 13X powder serving as adsorbent. The pore system of the prepared monoliths features micropores assigned to the zeolite 13X particle framework, interparticular pores of ∼1-2 μm, lamellar pores derived from freeze casting of ∼10 μm, and an interconnected pore network obtained from the sacrificial templates ranging from around 100 to 200 μm with a total porosity of 71%. Gas permeation measurements show an increase in intrinsic permeability by a factor of 14 for monoliths prepared with an additional sacrificial templated foam compared to monoliths solely providing freeze casting pores.

Silver nanoparticle-doped zirconia capillaries for enhanced bacterial filtration.

Membrane clogging and biofilm formation are the most serious problems during water filtration. Silver nanoparticle (Agnano) coatings on filtration membranes can prevent bacterial adhesion and the initiation of biofilm formation. In this study, Agnano are immobilized via direct reduction on porous zirconia capillary membranes to generate a nanocomposite material combining the advantages of ceramics being chemically, thermally and mechanically stable with nanosilver, an efficient broadband bactericide for water decontamination.

Highly efficient enzyme-functionalized porous zirconia microtubes for bacteria filtration.

In contrast to polymer membranes, ceramic membranes offer considerable advantages for safe drinking water provision due to their excellent chemical, thermal, and mechanical endurance. In this study, porous ceramic microtubes made of yttria stabilized zirconia (YSZ) are presented, which are conditioned for bacteria filtration by immobilizing lysozyme as an antibacterial enzyme. In accordance with determined membrane pore sizes of the nonfunctionalized microtube of ≤200 nm, log reduction values (LRV) of nearly 3 (i.

A semi-quantitative dipstick assay for microcystin.

An immunochromatographic lateral flow dipstick assay for the fast detection of microcystin-LR was developed. Colloid gold particles with diameters of 40 nm were used as red-colored antibody labels for the visual detection of the antigen. The new dipstick sensor is capable of detecting down to 5 microg x l(-1) (ppb; total inversion of the color signal) or 1 ppb (observation of color grading) of microcystin-LR.

Development of a novel membrane aerated hollow-fiber microbioreactor.

A new challenge in biotechnological processes is the development of flexible bioprocessing platforms, allowing strain selection, facilitating scale-up and integrating separation steps. Miniaturization of such a cultivation system allows parallel use and the saving of resources but makes the supply of oxygen to the cells difficult. In this work we present a membrane aerated hollow-fiber microbioreactor (HFMBR) which consists of an acrylic glass module equipped with two different types of membrane fibers.

Microvascular breast reconstruction in the diabetic patient.

Background: The free transverse rectus abdominis musculocutaneous (TRAM) flap is frequently advocated for autogenous breast reconstruction following mastectomy. The success rate and complications associated with free TRAM flap breast reconstruction are well documented. Risk factors such as cigarette smoking and obesity have been studied.

Cavernous nerve reconstruction to preserve erectile function following non-nerve-sparing radical retropubic prostatectomy: a prospective study.

Erectile dysfunction following radical prostatectomy for treatment of clinically localized prostate cancer remains a problem that deters many men from seeking surgical treatment. Sparing the cavernous nerves has been popularized as a method of preserving potency, but men with locally advanced disease may be at increased risk for positive margins with this technique. In this study, sural nerve grafting of the cavernous nerve bundles, to preserve postoperative potency while potentially maximizing cancer control, was examined.

Breast cancer recurrence after immediate reconstruction: patterns and significance.

Local recurrence of cancer after mastectomy and immediate breast reconstruction is generally regarded as a poor prognostic indicator. This study was conducted to identify specific patterns of local recurrence following reconstruction and to determine their biological significance. The records of all patients who had undergone immediate breast reconstruction at The University of Texas M.

Implications of axillary sentinel lymph node biopsy in immediate autologous breast reconstruction.

For patients with invasive breast cancer, if the results of an axillary sentinel node biopsy are determined to be positive after permanent pathologic examination, the current recommendation is to perform a complete axillary node dissection. Subsequent axillary surgery may compromise the blood supply to an immediate autologous breast reconstruction. The purpose of this study was to determine which clinicopathologic factors in clinically node-negative breast cancer patients may be associated with an increased risk of positive axillary nodes.

Drains and seromas in TRAM flap breast reconstruction.

Surgeons who perform transverse rectus abdominis musculocutaneous (TRAM) flaps have differing opinions about how many drains are required in the breast and abdomen to prevent seroma. The authors therefore decided to review their experience to determine whether the number of drains influenced the incidence of seroma. All patients who underwent breast reconstruction using TRAM or deep inferior epigastric perforator flaps at The University of Texas M.

Limb salvage for soft-tissue malignancies of the foot: an evaluation of free-tissue transfer.

Free flaps may safely allow meaningful ambulation, durable limb preservation, and better quality of life in patients undergoing resections of soft-tissue cancers of the foot. To prove this, the records of a series of patients at The University of Texas M. D.