In Situ Observation of Low-Power Nano-Synaptic Response in Graphene Oxide Using Conductive Atomic Force Microscopy.

Multiple studies have reported the observation of electro-synaptic response in different metal/insulator/metal devices. However, most of them analyzed large (>1 µm ) devices that do not meet the integration density required by industry (10  devices/mm ). Some studies emploied a scanning tunneling microscope (STM) to explore nano-synaptic response in different materials, but in this setup there is a nanogap between the insulator and one of the metallic electrodes (i.

Colonoscopy-related injury among colonoscopists: an international survey.

 Colonoscopy is physically demanding for endoscopists and patients. Repetitive movements during colonoscopy can lead to overuse injuries. We aimed to explore the prevalence and range of colonoscopy-related musculoskeletal injuries (CRIs) in endoscopists.

Determining the Level and Location of Functional Groups on Few-Layer Graphene and Their Effect on the Mechanical Properties of Nanocomposites.

Graphene is a highly desirable material for a variety of applications; in the case of nanocomposites, it can be functionalized and added as a nanofiller to alter the ultimate product properties, such as tensile strength. However, often the material properties of the functionalized graphene and the location of any chemical species, attached via different functionalization processes, are not known. Thus, it is not necessarily understood why improvements in product performance are achieved, which hinders the rate of product development.

Core-Shell Electrospun Polycrystalline ZnO Nanofibers for Ultra-Sensitive NO Gas Sensing.

This Research Article discusses the growth of polycrystalline, self-supporting ZnO nanofibers, which can detect nitrogen dioxide (NO) gas down to 1 part per billion (ppb), one of the smallest detection limits reported for NO using ZnO. A new and innovative method has been developed for growing polycrystalline ZnO nanofibers. These nanofibers have been created using core-shell electrospinning of inorganic metal precursor zinc neodecanoate, where growth occurs at the core of the nanofibers.

Charged Carbon Nanomaterials: Redox Chemistries of Fullerenes, Carbon Nanotubes, and Graphenes.

Since the discovery of buckminsterfullerene over 30 years ago, sp-hybridised carbon nanomaterials (including fullerenes, carbon nanotubes, and graphene) have stimulated new science and technology across a huge range of fields. Despite the impressive intrinsic properties, challenges in processing and chemical modification continue to hinder applications. Charged carbon nanomaterials (CCNs), formed via the reduction or oxidation of these carbon nanomaterials, facilitate dissolution, purification, separation, chemical modification, and assembly.

Enhanced piezoelectric effect at the edges of stepped molybdenum disulfide nanosheets.

The development of piezoelectric layered materials may be one of the key elements enabling expansion of nanotechnology, as they offer a solution for the construction of efficient transducers for a wide range of applications, including self-powered devices. Here, we investigate the piezoelectric effect in multilayer (ML) stepped MoS flakes obtained by liquid-phase exfoliation, which is especially interesting because it may allow the scalable fabrication of electronic devices using large area deposition techniques (e.g.

Ionic solutions of two-dimensional materials.

Strategies for forming liquid dispersions of nanomaterials typically focus on retarding reaggregation, for example via surface modification, as opposed to promoting the thermodynamically driven dissolution common for molecule-sized species. Here we demonstrate the true dissolution of a wide range of important 2D nanomaterials by forming layered material salts that spontaneously dissolve in polar solvents yielding ionic solutions. The benign dissolution advantageously maintains the morphology of the starting material, is stable against reaggregation and can achieve solutions containing exclusively individualized monolayers.

Chemical routes to discharging graphenides.

Chemical and electrochemical reduction methods allow the dispersion, processing, and/or functionalization of discrete sp-hybridised nanocarbons, including fullerenes, nanotubes and graphenes. Electron transfer to the nanocarbon raises the Fermi energy, creating nanocarbon anions and thereby activating an array of possible covalent reactions. The Fermi level may then be partially or fully lowered by intended functionalization reactions, but in general, techniques are required to remove excess charge without inadvertent covalent reactions that potentially degrade the nanocarbon properties of interest.

Microfluidization of Graphite and Formulation of Graphene-Based Conductive Inks.

We report the exfoliation of graphite in aqueous solutions under high shear rate [∼ 10 s] turbulent flow conditions, with a 100% exfoliation yield. The material is stabilized without centrifugation at concentrations up to 100 g/L using carboxymethylcellulose sodium salt to formulate conductive printable inks. The sheet resistance of blade coated films is below ∼2Ω/□.

Carbon nanotube anions for the preparation of gold nanoparticle-nanocarbon hybrids.

Gold nanoparticles (AuNPs) can be evenly deposited on single-walled carbon nanotubes (SWCNTs) via the reduction of the highly stable complex, chloro(triphenylphosphine) gold(I), with SWCNT anions ('nanotubides'). This methodology highlights the unusual chemistry of nanotubides and provides a blueprint for the generation of many other hybrid nanomaterials.

Probing the charging mechanisms of carbon nanomaterial polyelectrolytes.

Chemical charging of single-walled carbon nanotubes (SWCNTs) and graphenes to generate soluble salts shows great promise as a processing route for electronic applications, but raises fundamental questions. The reduction potentials of highly-charged nanocarbon polyelectrolyte ions were investigated by considering their chemical reactivity towards metal salts/complexes in forming metal nanoparticles. The redox activity, degree of functionalisation and charge utilisation were quantified via the relative metal nanoparticle content, established using thermogravimetric analysis (TGA), inductively coupled plasma atomic emission spectroscopy (ICP-AES) and X-ray photoelectron spectroscopy (XPS).

Giant cationic polyelectrolytes generated via electrochemical oxidation of single-walled carbon nanotubes.

Previously, reduced single-walled carbon nanotube anions have been used for effective processing and functionalization. Here we report individually separate and distinct (that is, discrete) single-walled carbon nanotube cations, directly generated from a pure anode using a non-aqueous electrochemical technique. Cyclic voltammetry provides evidence for the reversibility of this nanoion electrochemisty, and can be related to the complex electronic density of states of the single-walled carbon nanotubes.

Electrochemical processing of discrete single-walled carbon nanotube anions.

The dissolution of single-walled carbon nanotubes (SWCNTs) remains a fundamental challenge, reliant on aggressive chemistry or ultrasonication and lengthy ultracentrifugation. In contrast, simple nonaqueous electrochemical reduction leads to spontaneous dissolution of individualized SWCNTs from raw, unprocessed powders. The intrinsic electrochemical stability and conductivity of these nanomaterials allow their electrochemical dissolution from a pure SWCNT cathode to form solutions of individually separate and distinct (i.

Unweaving the rainbow: a review of the relationship between single-walled carbon nanotube molecular structures and their chemical reactivity.

Single-walled carbon nanotubes (SWNTs) are a fundamental family of distinct molecules, each bearing the possibility of different reactivities due to their intrinsically distinct chemical properties. SWNT syntheses generate a heterogeneous mixture of species with varying electronic character, lengths, diameters and helicities, (n,m), as well as other amorphous, graphitic and metal catalyst impurities. In recent years, selective syntheses and post-synthetic separation strategies have advanced, driven by the requirement for pure SWNTs displaying particular features.

Mid-to-long term follow-up of Transcend metal-on-metal versus Interseal metal-on-polyethylene bearings in total hip arthroplasty.

Second-generation metal-on-metal total hip arthroplasty (THA) was introduced in the early 1990s to address osteolysis and aseptic loosening resulting from polyethylene wear. We present a comparison between the Transcend metal-on-metal and Interseal metal-on-polyethylene THAs. Thirty-seven hips with Transcend metal bearings and 36 hips with Interseal polyethylene acetabular liners but identical acetabular shells were reviewed to determine clinical performance, radiographic changes, and survivorship.

Provision of care for patients. Mechanical ventilation in the PACU.

The mechanical ventilation of patients within postanaesthetic care units (PACUs) is a practice that clinicians have experienced and assisted with for several years. The author's own clinical area, a PACU serving a large theatre suite, has recently seen provisions put in place to cater specifically for critically ill patients who require mechanical ventilation. The majority of patients requiring intervention are those that are in the immediate postoperative stage of their care, however patients from all wards and departments within the Trust, as well as those admitted through the accident and emergency department, are also accepted.