Mechanical recyclability of biodegradable polymers used for food packaging: case study of polyhydroxybutyrate-co-valerate (PHBV) plastic.

For the purpose of mechanical recycling for food contact applications, decontamination of polyhydroxybutyrate-co-valerate (PHBV) plastic was performed under different temperatures and time conditions. As expected, increasing the decontamination temperature and duration increased the decontamination efficiency, but also the degradation of the polymer. The combination 160 °C/6 h was selected as the optimal conditions that maximize contaminants removal while minimizing polymer degradation.

Food-Grade PE Recycling: Effect of Nanoclays on the Decontamination Efficacy.

Although PE-based nanocomposites are gaining interest within the food packaging industry for their outstanding functional properties, their end-of-life has been poorly studied. The lack of identification of such materials suggests that they could end-up in the recycling pathway optimized for the decontamination of un-filled PE. The objective of the present work is to understand and quantify the mechanisms involved in the high temperature desorption of surrogates for PE nanocomposites filled with organo-modified montmorillonite (PNC), compared to conventional PE.

Rapid quantification of clove (Syzygium aromaticum) and spearmint (Mentha spicata) essential oils encapsulated in a complex organic matrix using an ATR-FTIR spectroscopic method.

Essential oils (EOs) are often encapsulated in various and complex matrices to protect them against potential degradation or to control their release. To achieve an optimum use in food products, their rapid and precise quantification after encapsulation and storage is required. Hence, a rapid ATR-FTIR method was developed and tested with two encapsulated essential oils (EOs): clove (Syzygium aromaticum) and spearmint (Mentha spicata);.

Worst case prediction of additives migration from polystyrene for food safety purposes: a model update.

A reliable prediction of migration levels of plastic additives into food requires a robust estimation of diffusivity. Predictive modelling of diffusivity as recommended by the EU commission is carried out using a semi-empirical equation that relies on two polymer-dependent parameters. These parameters were determined for the polymers most used by packaging industry (LLDPE, HDPE, PP, PET, PS, HIPS) from the diffusivity data available at that time.

Changes in nutritional and sensory properties of orange juice packed in PET bottles: an experimental and modelling approach.

Sensitivity to oxidation of an orange juice was investigated through packaging in standard PET or active PET with oxygen scavenger bottles. The evolution of dissolved oxygen was found to be similar in all bottles, whereas ascorbic acid degradation was related to the oxygen transfer with higher losses in standard PET (53%) against active PET (31%). Moreover, when juice was exposed to high intensity light, a fold faster degradation of ascorbic acid was observed compared to total darkness.

Retention and release of cinnamaldehyde from wheat protein matrices.

Cinnamaldehyde treatment of gliadin films provided a means of decreasing their solubility, increasing their molecular weight profile, and reducing their overall migration into food simulants as a consequence of the high degree of polymerization achieved. Despite losses incurred in the film manufacturing process, and the amount that remained covalently bonded with protein because of cross-linking, the addition of 1.5, 3, and 5% of cinnamaldehyde (g/100 g protein) to gliadins at pH 2 rendered 1.

Effect of ethanol on the sorption of four targeted wine volatile compounds in a polyethylene film.

The objectives of this study were to demonstrate that the presence of ethanol in a solution containing two esters and two aromatic alcohols has several consequences on the sorption of these compounds into polyethylene (PE) film. First, sorption of ethanol into the PE film occurred at the same time as water and reached 8 kg m(-3) using 12% v/v of ethanol. This sorption was associated with an increase in PE crystallinity, which may have prevented the sorption of volatile compounds despite their strong affinity with PE film, as evaluated by Hansen solubility parameters.

Effects of heat treatment and pectin addition on beta-lactoglobulin allergenicity.

The specific effects of heat treatment and/or addition of low/high-methylated pectin (LMP/HMP) on the allergenicity of beta-lactoglobulin (beta-Lg) and its hydrolysis products were investigated through a two-step in vitro digestion approach. beta-Lg was first hydrolyzed by pepsin and then by a trypsin/chymotrypsin (T/C) mixture done in a dialysis bag with a molecular weight cutoff of 1000. The protein digestion was followed by SDS-PAGE electrophoresis performed on each digestion product, and their in vitro allergenicity was analyzed by immunoblotting.

Individual contribution of grain outer layers and their cell wall structure to the mechanical properties of wheat bran.

The mechanical properties of wheat bran and the contribution of each constitutive tissue on overall bran properties were determined on a hard wheat (cv. Baroudeur) and a soft wheat (cv. Scipion).