Spectrally broad laser radiation from continuous wave (cw) lasers can exhibit second-order autocorrelation traces virtually indistinguishable from those of mode-locked lasers. Consequently, based only on autocorrelations, one might erroneously conclude that a cw laser is mode-locked. This pitfall in interpretation can be avoided by carefully characterizing radio frequency transients and spectra.
View Article and Find Full Text PDFWe present a compact nonlinear compression scheme for the generation of millijoule few-cycle pulses beyond 4 µm wavelength. For this purpose 95 fs pulses at 5 µm from a 1 kHz midwave-IR optical parametric chirped pulse amplifier (OPCPA) are spectrally broadened due to a self-phase modulation in ZnSe. The subsequent compression in a bulk material yields 53 fs pulses with 1.
View Article and Find Full Text PDFExploiting a plasmonic resonance, near-perfect grating structures have been reported, with a regularity that exceeds typical commercially available diffraction gratings.
View Article and Find Full Text PDFThe transfer of electronic excitations from Cr to Fe ions in co-doped epitaxially grown ZnSe is studied by time-resolved photoluminescence (PL) spectroscopy with unprecedented sub-10 ns time resolution. Upon excitation of Cr ions by a picosecond pulse at 2.05 µm wavelength, PL from Fe ions displays a delayed onset and a retarded decay in comparison to Fe PL directly excited at 3.
View Article and Find Full Text PDFA pulse-shaper-based method for spectral phase measurement and compression with milliradian precision is proposed and tested experimentally. Measurements of chirp and third-order dispersion are performed and compared to theoretical predictions. The single-digit milliradian accuracy is benchmarked by a group velocity dispersion measurement of fused silica.
View Article and Find Full Text PDFControlling the carrier envelope phase (CEP) in mode-locked lasers over practically long timescales is crucial for real-world applications in ultrafast optics and precision metrology. We present a hybrid solution that combines a feed-forward technique to stabilize the phase offset in fast timescales and a feedback technique that addresses slowly varying sources of interference and locking bandwidth limitations associated with gain media with long upper-state lifetimes. We experimentally realize the hybrid stabilization system in an Er:Yb:glass mode-locked laser and demonstrate 75 hours of stabilization with integrated phase noise of 14 mrad (1 Hz to 3 MHz), corresponding to around 11 as of carrier to envelope jitter.
View Article and Find Full Text PDFFew-cycle pulsed laser technology highlights the need for control and stabilization of the carrier-envelope phase (CEP) for applications requiring shot-to-shot timing and phase consistency. This general requirement has been achieved successfully in a number of free-space and fiber lasers via feedback and feed-forward (FF) methods. Expanding on existing results, we demonstrate CEP stabilization through the FF method applied to a SESAM mode-locked Er:Yb:glass laser at 1.
View Article and Find Full Text PDFWe investigate the influence of the optical Doppler effect on the carrier-envelope frequency (CEF) of a mode-locked pulse train. The laser pulses are Doppler-shifted in frequency during reflection off a periodically moving mirror that is driven by an electro-dynamical exciter inside an f-2f interferometer. Depending on the relative movement of the mirror at the instant of reflection, we experimentally demonstrate a CEF shift of the laser pulses up to ±69 kHz, which is sufficient for the carrier-envelope phase control of laser amplifiers with repetition rates of 10 kHz and beyond.
View Article and Find Full Text PDFWhen confronted with a pulse train whose intensity and/or phase versus time varies from pulse to pulse, multi-shot pulse-measurement techniques usually exhibit a coherent artifact (CA), which substantially complicates the interpretation of the measurement. In frequency-resolved optical gating (FROG), such instabilities are indicated by discrepancies between the measured and retrieved FROG traces. Here we consider the simultaneous retrieval of the CA and the average pulse characteristics from a single FROG trace in the limit of significant fluctuations.
View Article and Find Full Text PDFObtaining the temporal shape of an ultrashort laser pulse using the method of dispersion scan entails solving a nonlinear inverse problem, a challenging prospect on its own, yet still aggravated when the pulse shape being measured is temporally varying from pulse to pulse. For this purpose, we use a Differential Evolution (DE) algorithm enhanced by three different regularization methods. The DE algorithm in its standard form is insufficient for reconstructing the pulse in the case of unstable pulse trains.
View Article and Find Full Text PDFThe f-to-2f interferometer plays a key role for carrier-envelope phase (CEP) measurement and subsequent stabilization. The CEP measurement typically relies on the application of two optical nonlinearities, namely supercontinuum generation and second-harmonic generation. Then the cascadation of these nonlinearities often leads to signal levels on the order of a few photons per pulse.
View Article and Find Full Text PDFWe demonstrate a dual-beam infrared optical parametric source featuring a noncollinear KTA booster amplifier and straightforward angular dispersion compensation of the idler beam. Through careful beam and pulse characterization, and high-harmonic generation in a crystalline solid, we show that the corrected idler beam is diffraction-limited, astigmatism-free, and compressible to its transform-limited, 5-cycle pulse duration. Pumped by only 40-µJ pulses at 1.
View Article and Find Full Text PDFMode locking of a 1.34 μm vertical external cavity surface emitting laser is demonstrated using a GaSb-based semiconductor saturable absorber mirror (SESAM). The SESAM includes six AlGaSb quantum wells (QWs) with an absorption edge at ∼1.
View Article and Find Full Text PDFBroadband characterization of the carrier-envelope phase (CEP) noise spectral density of free-running mode-locked lasers is essential for advanced low-noise optical frequency comb designs. Here we present a direct method that utilizes an optical heterodyne beat between a pair of repetition-rate-locked mode-locked lasers for CEP noise characterization, without requiring an f-2f interferometer or nonlinear optical conversion steps. A proof-of-principle experiment in a femtosecond Yb-fiber laser achieves CEP noise spectral density characterization with >270 dB dynamic range over a Fourier frequency range from 5 mHz to 8 MHz.
View Article and Find Full Text PDFThe concept of coherence is of fundamental importance for describing the physical characteristics of light and for evaluating the suitability for experimental application. In the case of pulsed laser sources, the pulse-to-pulse coherence is usually considered for a judgment of the compressibility of the pulse train. This type of coherence is often lost during propagation through a highly nonlinear medium, and pulses prove incompressible despite multioctave spectral coverage.
View Article and Find Full Text PDFA novel algorithm for the ultrashort laser pulse characterization method of interferometric frequency-resolved optical gating (iFROG) is presented. Based on a genetic method, namely, differential evolution, the algorithm can exploit all available information of an iFROG measurement to retrieve the complex electric field of a pulse. The retrieval is subjected to a series of numerical tests to prove the robustness of the algorithm against experimental artifacts and noise.
View Article and Find Full Text PDFA novel pulse characterization method is presented, favorably combining interferometric frequency-resolved optical gating (FROG) and time-domain ptychography. This new variant is named ptychographic-interferometric frequency-resolved optical gating (πFROG). The measurement device is simple, bearing similarity to standard second-harmonic FROG, yet with a collinear beam geometry and an added bandpass filter in one of the correlator arms.
View Article and Find Full Text PDFAttosecond spectroscopy and precision frequency metrology depend on the stabilization of the carrier-envelope phase (CEP) of mode-locked lasers. Unfortunately, the phase of only a few types of lasers can be stabilized to jitters in the few-hundred millirad range. In a comparative experimental study, we analyze a femtosecond Ti:sapphire laser and three mode-locked fiber lasers.
View Article and Find Full Text PDFFiber supercontinua represent light sources of pivotal importance for a wide range of applications, ranging from optical communications to frequency metrology. Although spectra encompassing more than three octaves can be produced, the applicability of such spectra is strongly hampered due to coherence degradation during spectral broadening. Assuming pulse parameters at the cutting edge of currently available laser technology, we demonstrate the possibility of strongly coherent supercontinuum generation.
View Article and Find Full Text PDFPlacing a sinusoidally driven air capacitor in the intracavity beam path of a mode-locked few-cycle Ti:sapphire oscillator, we measure the influence of the electro-optical Kerr effect on the carrier-envelope phase of the laser pulses. Using a capacitor length of only 8 cm at atmospheric pressure, we observe a Kerr-induced frequency modulation of the carrier-envelope beat note. From the measured frequency excursion, we determine a Kerr constant of the order of 10 m/V, which is found to agree with theoretically computed hyperpolarizabilities of the nitrogen and oxygen molecules.
View Article and Find Full Text PDFWe reanalyse the probability for formation of extreme waves using the simple model of linear interference of a finite number of elementary waves with fixed amplitude and random phase fluctuations. Under these model assumptions no rogue waves appear when less than 10 elementary waves interfere with each other. Above this threshold rogue wave formation becomes increasingly likely, with appearance frequencies that may even exceed long-term observations by an order of magnitude.
View Article and Find Full Text PDFFiber-optical rogue waves appear as rare but extreme events during optical supercontinuum generation in photonic crystal fibers. This process is typically initiated by the decay of a high-order fundamental soliton into fundamental solitons. Collisions between these solitons as well as with dispersive radiation affect the soliton trajectory in frequency and time upon further propagation.
View Article and Find Full Text PDFWe show that it is possible to overcome the perceived limitations caused by absorption bands in water so as to generate supercontinuum (SC) spectra in the anomalous dispersion regime that extend well beyond 2000 nm wavelength. By choosing a pump wavelength within a few hundred nanometers above the zero-dispersion wavelength of 1048 nm, initial spectral broadening extends into the normal dispersion regime and, in turn, the SC process in the visible strongly benefits from phase-matching and matching group velocities between dispersive radiation and light in the anomalous dispersion regime. Some of the SC spectra are shown to encompass two and a half octaves.
View Article and Find Full Text PDFUsing experimental data from three different rogue wave supporting systems, determinism, and predictability of the underlying dynamics are evaluated with methods of nonlinear time series analysis. We included original records from the Draupner platform in the North Sea as well as time series from two optical systems in our analysis. One of the latter was measured in the infrared tail of optical fiber supercontinua, the other in the fluence profiles of multifilaments.
View Article and Find Full Text PDFPassive mode-locking of a Tm,Ho:KLu(WO(4))(2) laser operating at 2060 nm using different designs of InGaAsSb quantum-well based semiconductor saturable absorber mirrors (SESAMs) is demonstrated. The self-starting mode-locked laser delivers pulse durations between 4 and 8 ps at a repetition rate of 93 MHz with maximum average output power of 155 mW. Mode-locking performance of a Tm,Ho:KLu(WO(4))(2) laser is compared for usage of a SESAM to a single-walled carbon nanotube saturable absorber.
View Article and Find Full Text PDF