Charge Transport in Mixed Semiconducting Carbon Nanotube Networks with Tailored Mixing Ratios.

The ability to prepare uniform and dense networks of purely semiconducting single-walled carbon nanotubes (SWNTs) has enabled the design of various (opto-)electronic devices, especially field-effect transistors (FETs) with high carrier mobilities. Further optimization of these SWNT networks is desired to surpass established solution-processable semiconductors. The average diameter and diameter distribution of nanotubes in a dense network were found to influence the overall charge carrier mobility; e.

Broadband Tunable, Polarization-Selective and Directional Emission of (6,5) Carbon Nanotubes Coupled to Plasmonic Crystals.

We demonstrate broadband tunability of light emission from dense (6,5) single-walled carbon nanotube thin films via efficient coupling to periodic arrays of gold nanodisks that support surface lattice resonances (SLRs). We thus eliminate the need to select single-walled carbon nanotubes (SWNTs) with different chiralities to obtain narrow linewidth emission at specific near-infrared wavelengths. Emission from these hybrid films is spectrally narrow (20-40 meV) yet broadly tunable (∼1000-1500 nm) and highly directional (divergence <1.

Understanding Charge Transport in Mixed Networks of Semiconducting Carbon Nanotubes.

The ability to select and enrich semiconducting single-walled carbon nanotubes (SWNT) with high purity has led to a fast rise of solution-processed nanotube network field-effect transistors (FETs) with high carrier mobilities and on/off current ratios. However, it remains an open question whether it is best to use a network of only one nanotube species (monochiral) or whether a mix of purely semiconducting nanotubes but with different bandgaps is sufficient for high performance FETs. For a range of different polymer-sorted semiconducting SWNT networks, we demonstrate that a very small amount of narrow bandgap nanotubes within a dense network of large bandgap nanotubes can dominate the transport and thus severely limit on-currents and effective carrier mobility.

Hybrid Modulation-Doping of Solution-Processed Ultrathin Layers of ZnO Using Molecular Dopants.

An alternative doping approach that exploits the use of organic donor/acceptor molecules for the effective tuning of the free electron concentration in quasi-2D ZnO transistor channel layers is reported. The method relies on the deposition of molecular dopants/formulations directly onto the ultrathin ZnO channels. Through careful choice of materials combinations, electron transfer from the dopant molecule to ZnO and vice versa is demonstrated.

Polymer-sorted semiconducting carbon nanotube networks for high-performance ambipolar field-effect transistors.

Efficient selection of semiconducting single-walled carbon nanotubes (SWNTs) from as-grown nanotube samples is crucial for their application as printable and flexible semiconductors in field-effect transistors (FETs). In this study, we use atactic poly(9-dodecyl-9-methyl-fluorene) (a-PF-1-12), a polyfluorene derivative with asymmetric side-chains, for the selective dispersion of semiconducting SWNTs with large diameters (>1 nm) from plasma torch-grown SWNTs. Lowering the molecular weight of the dispersing polymer leads to a significant improvement of selectivity.

Mapping charge-carrier density across the p-n junction in ambipolar carbon-nanotube networks by Raman microscopy.

In situ confocal Raman microscopy is used to map the recombination zone (induced p-n junction) in an ambipolar carbon-nanotube-network transistor with high spatial resolution. The shift of the 2D mode (G' mode) depending on hole and electron accumulation serves as a measure for the local charge-carrier density and provides complementary information about charge transport and recombination in ambipolar transistors.

Effect of Polymer Molecular Weight and Solution Parameters on Selective Dispersion of Single-Walled Carbon Nanotubes.

The selective dispersion of single-walled carbon nanotube species (n,m) with conjugated polymers such as poly(9,9-dioctylfluorene) (PFO) and poly(9,9-dioctylfluorene--benzothiadiazole) (F8BT) in organic solvents depends not only on the type of solvent but also on the molecular weight of the polymer. We find an increasing amount of nanotubes and altered selectivities for dispersions with higher molecular weight polymers. Including the effects of different aromatic solvents, we propose that solution viscosity is one of the factors influencing the apparent selectivity by changing the reaggregation rate of the single-walled carbon nanotubes (SWNT).