Plasmonic devices - tiny plasmonic hybrid receivers.

Plasmonic hybrids are introduced to replace photonic optical hybrids for coherent reception. These plasmonic circuits offer a compact footprint and a fabrication compatible with many electronic platforms as one only relies on metallic layer stacks. To mitigate the plasmonic losses, we propose new designs with shortest propagation paths.

Plasmonic devices - equivalent circuit representations.

An equivalent circuit model for plasmonic slot waveguide-based devices is presented. Taking advantage of the high mode confinement provided by this waveguide geometry, we express plasmonic waveguide geometries using transmission line parameters and express T-junctions using lumped equivalent circuit elements. By combining these fundamental building blocks, we subsequently introduce equivalent circuit models for stub filters and branch-line couplers.

Controlling photothermoelectric directional photocurrents in graphene with over 400 GHz bandwidth.

Photodetection in the near- and mid-infrared spectrum requires a suitable absorbing material able to meet the respective targets while ideally being cost-effective. Graphene, with its extraordinary optoelectronic properties, could provide a material basis simultaneously serving both regimes. The zero-band gap offers almost wavelength independent absorption which lead to photodetectors operating in the infrared spectrum.

Plasmonic Modulators in Cryogenic Environment Featuring Bandwidths in Excess of 100 GHz and Reduced Plasmonic Losses.

Cryogenic quantum applications have a demand for an ever-higher number of interconnects and bandwidth. Photonic links are foreseen to offer data transfer with high bandwidth, low heat load, and low noise to enable the next-generation scalable quantum computing systems. However, they require high-speed and energy-efficient modulators operating at cryogenic temperatures for electro-optic signal conversion.

Bulk-suppressed and surface-sensitive Raman scattering by transferable plasmonic membranes with irregular slot-shaped nanopores.

Raman spectroscopy enables the non-destructive characterization of chemical composition, crystallinity, defects, or strain in countless materials. However, the Raman response of surfaces or thin films is often weak and obscured by dominant bulk signals. Here we overcome this limitation by placing a transferable porous gold membrane, (PAuM) on the surface of interest.

Engineering Graphene Phototransistors for High Dynamic Range Applications.

Phototransistors are light-sensitive devices featuring a high dynamic range, low-light detection, and mechanisms to adapt to different ambient light conditions. These features are of interest for bioinspired applications such as artificial and restored vision. In this work, we report on a graphene-based phototransistor exploiting the photogating effect that features picowatt- to microwatt-level photodetection, a dynamic range covering six orders of magnitude from 7 to 10 lux, and a responsivity of up to 4.

Metamaterial graphene photodetector with bandwidth exceeding 500 gigahertz.

Although graphene has met many of its initially predicted optoelectronic, thermal, and mechanical properties, photodetectors with large spectral bandwidths and extremely high frequency responses remain outstanding. In this work, we demonstrate a >500 gigahertz, flat-frequency response, graphene-based photodetector that operates under ambient conditions across a 200-nanometer-wide spectral band with center wavelengths adaptable from <1400 to >4200 nanometers. Our detector combines graphene with metamaterial perfect absorbers with direct illumination from a single-mode fiber, which breaks with the conventional miniaturization of photodetectors on an integrated photonic platform.

Highly Responsive Mid-Infrared Metamaterial Enhanced Heterostructure Photodetector Formed out of Sintered PbSe/PbS Colloidal Quantum Dots.

Efficient and simple-to-fabricate light detectors in the mid infrared (MIR) spectral range are of great importance for various applications in existing and emerging technologies. Here, we demonstrate compact and efficient photodetectors operating at room temperature in a wavelength range of 2710-4250 nm with responsivities as high as 375 and 4 A/W. Key to the high performance is the combination of a sintered colloidal quantum dot (CQD) lead selenide (PbSe) and lead sulfide (PbS) heterojunction photoconductor with a metallic metasurface perfect absorber.

Modeling Hydrodynamic Charge Transport in Graphene.

Graphene has exceptional electronic properties, such as zero band gap, massless carriers, and high mobility. These exotic carrier properties enable the design and development of unique graphene devices. However, traditional semiconductor solvers based on drift-diffusion equations are not capable of modeling and simulating the charge distribution and transport in graphene, accurately, to its full extent.

Photonic response and temperature evolution of SiO/TiO multilayers.

Unlabelled: The microstructural and optical reflectivity response of photonic SiO/TiO nanomultilayers have been investigated as a function of temperature and up to the material system's melting point. The nanomultilayers exhibit high, broadband reflectivities up to 1350 °C with values that exceed 75% for a 1 μm broad wavelength range (600-1600 nm). The optimized nanometer sized, dielectric multilayers undergo phase transformations from anatase TiO and amorphous SiO to the thermodynamically stable phases, rutile and cristobalite, respectively, that alter their structural morphology from the initial multilayers to that of a scatterer.

Design of CMOS-compatible metal-insulator-metal metasurfaces via extended equivalent-circuit analysis.

Photonic metasurfaces compatible with large-scale production such as CMOS are of importance because they promise cointegration of electronics with photonics for detection, communication and sensing. The main challenges on the way of designing such metasurfaces are: (1) large variety of possible geometrical shapes of metasurface elements that makes finding the most appropriate shape difficult; (2) poor compatibility of available electronic layer stacks with photonics. In this paper we show how to address both of these challenges utilizing extended equivalent-circuit analysis.

Template Stripping of Perovskite Thin Films for Dry Interfacing and Surface Structuring.

Combining excellent optoelectronic properties with the benefits of solution processability, metal-halide perovskites are promising materials for photovoltaic and light-emitting technologies. To facilitate the integration of perovskite thin films into optoelectronic devices, a need exists for simple and efficient fabrication methods. Here, we present a template-stripping technique to produce ultraflat and flexible perovskite thin films.

Compact Mid-Infrared Gas Sensing Enabled by an All-Metamaterial Design.

The miniaturization of mid-infrared optical gas sensors has great potential to make the "fingerprint region" between 2 and 10 μm accessible to a variety of cost-sensitive applications ranging from medical technology to atmospheric sensing. Here we demonstrate a gas sensor concept that achieves a 30-fold reduction in absorption volume compared to conventional gas sensors by using plasmonic metamaterials as on-chip optical filters. Integrating metamaterials into both the emitter and the detector cascades their individual filter functions, yielding a narrowband spectral response tailored to the absorption band of interest, here CO.

Broadband, High-Temperature Stable Reflector for Aerospace Thermal Radiation Protection.

A simple and thermally stable photonic heterostructure exhibiting high average reflectivity (⟨⟩ ≈ 88.8%) across a broad wavelength range (920-1450 nm) is presented. The design combines a thin, highly reflective and broadband metallic substrate (Ta) with an optimized dielectric coating (10 layers) to create an enhanced reflector with improved optical and thermal properties compared to its constituents.