Improving the bioactivity of cellulose acetate hemodialysis membranes through nanosilver modification.

The effectiveness and safety of hemodialysis can be hindered by protein accumulation, mechanical instability of membranes and bacterial infection during the dialytic therapy. Herein, we show that cellulose acetate membranes modified with the low-fouling polymers (namely polyvinylpyrrolidone and polyethylene glycol), followed by the in situ reduction of different densities of silver oxide(I) nanoparticles, can effectively address these limitations. These improvements comprise the enhanced resistance to the protein fouling, improved antimicrobial capabilities against S.

Copper oxide(I) nanoparticle-modified cellulose acetate membranes with enhanced antibacterial and antifouling properties.

Cellulose acetate membranes exhibit a potential to be applied in hemodialysis. However, their performance is limited by membrane fouling and a lack of antibacterial properties. In this research, copper oxide (I) nanoparticles were fabricated in situ into a cellulose acetate matrix in the presence of polyvinylpyrrolidone (pore-forming agent) and sulfobetaine (stabilising agent) to reduce the leakage of copper ions from nano-enhanced membranes.

Advancing oral health: Harnessing the potential of chitosan and polyphenols in innovative mouthwash formulation.

This paper explores the therapeutic perspectives of polyphenols and chitosan as potential anticancer agents in the mouthwash formulations. Taking into account the high incidence of squamous cell carcinoma (SCC) among oral cancers, this discussion will concentrate on the potential advantages of these compounds in oral care, focusing on their impact on improving oral health and cancer prevention. According to the data, it appears that the mixture of BACs extract and chitosan may increase the efficiency of the apoptosis of cancer cells while reducing the undesired side effects.

Removing Heavy Metals: Cutting-Edge Strategies and Advancements in Biosorption Technology.

This article explores recent advancements and innovative strategies in biosorption technology, with a particular focus on the removal of heavy metals, such as Cu(II), Pb(II), Cr(III), Cr(VI), Zn(II), and Ni(II), and a metalloid, As(V), from various sources. Detailed information on biosorbents, including their composition, structure, and performance metrics in heavy metal sorption, is presented. Specific attention is given to the numerical values of the adsorption capacities for each metal, showcasing the efficacy of biosorbents in removing Cu (up to 96.

A critical review of dental biomaterials with an emphasis on biocompatibility.

This paper presents the major achievements in the field of biomaterials in restorative dentistry and tissue regeneration reported over the past 3 years. The review aims to summarize the knowledge on important biomaterials and the emerging modification strategies to improve their biointegration, biological activity, mechanical properties, and resistance to the harsh oral environment. We also discuss the main opportunities and challenges associated with the use of biomaterials in dentistry.

The Pragmatism of Polyphenols and Flavonoids Application as Drugs, from an Academic Lab to a Pharmacy Shelf.

Polyphenols and flavonoids, naturally occurring compounds found abundantly in plants, have gained considerable attention in recent years due to their potential health benefits. Research exploring their bioactive properties has revealed promising therapeutic applications in various diseases. This article aims to provide a comprehensive overview of the intricate journey from academic laboratory discoveries to the availability of polyphenols and flavonoids as drugs on pharmacy shelves.

Microplastic label in microencapsulation field - Consequence of shell material selection.

Plastics make our lives easier in many ways; however, if they are not appropriately disposed of or recycled, they may end up in the environment where they stay for centuries and degrade into smaller and smaller pieces, called microplastics. Each year, approximately 42000 tonnes of microplastics end up in the environment when products containing them are used. According to the European Chemicals Agency (ECHA) one of the significant sources of microplastics are microcapsules formulated in home care and consumer care products.

Copper and Copper-Based Nanoparticles in Medicine-Perspectives and Challenges.

Nanotechnology has ushered in a new era of medical innovation, offering unique solutions to longstanding healthcare challenges. Among nanomaterials, copper and copper oxide nanoparticles stand out as promising candidates for a multitude of medical applications. This article aims to provide contemporary insights into the perspectives and challenges regarding the use of copper and copper oxide nanoparticles in medicine.

From Data to Diagnosis: How Machine Learning Is Changing Heart Health Monitoring.

The rapid advances in science and technology in the field of artificial neural networks have led to noticeable interest in the application of this technology in medicine. Given the need to develop medical sensors that monitor vital signs to meet both people's needs in real life and in clinical research, the use of computer-based techniques should be considered. This paper describes the latest progress in heart rate sensors empowered by machine learning methods.

Recovery of Metals from Wastewater-State-of-the-Art Solutions with the Support of Membrane Technology.

This paper discusses the most important research trends in the recovery of metals from industrial wastewater using membrane techniques in recent years. Particular attention is paid to the preparation of new membranes with the required filtration and separation properties. At the same time, possible future applications are highlighted.

Advances in the Removal of Cr(III) from Spent Industrial Effluents-A Review.

The review presents advances in the removal of Cr(III) from the industrial effluents published in the last ten years. Although Cr(III) has low solubility and is less dangerous for the aquatic environment than Cr(VI), it cannot be released into the aquatic environment without limitations and its content in water should be restricted. The development of efficient techniques for the removal of Cr(III) is also a response to the problem of chromium wastewater containing Cr(VI) ions.

Chromium(III) Removal from Nickel(II)-Containing Waste Solutions as a Pretreatment Step in a Hydrometallurgical Process.

This paper presents Cr(III) removal from nickel sulfate waste solutions as a pretreatment step for the modification of hydrogen storage alloys. Adsorption with two cation exchange resins, Dowex G26 (strongly acidic) and MAC-3 (weakly acidic), and precipitation with various solutions were chosen as simple operations for Cr(III) removal from waste solutions. The adsorption of Cr(III) was investigated for both model and real waste nickel solutions.

Removal of Copper(II) in the Presence of Sodium Dodecylobenzene Sulfonate from Acidic Effluents Using Adsorption on Ion Exchangers and Micellar-Enhanced Ultrafiltration Methods.

The selective removal of Cu(II) in the presence of sodium dodecylobenzene sulfonate from acidic effluents was made using the adsorption and micellar-enhanced ultrafiltration methods. Lewatit MonoPlus TP220 showed the best adsorption behavior in the systems containing Cu(II) in the presence of ABSNa50 surfactant compared to the other adsorbents (removal efficiency ≈ 100%, sorption capacity ≈ 10 mg/g). The kinetics followed the pseudo-second order kinetic equation.

Achievement in active agent structures as a power tools in tumor angiogenesis imaging.

According to World Health Organization (WHO) cancer is the second most important cause of death globally. Because angiogenesis is considered as an essential process of growth, proliferation and tumor progression, within this review we decided to shade light on recent development of chemical compounds which play a significant role in its imaging and monitoring. Indeed, the review gives insight about the current achievements of active agents structures involved in imaging techniques such as: positron emission computed tomography (PET), magnetic resonance imaging (MRI) and single photon emission computed tomography (SPECT), as well as combination PET/MRI and PET/CT.

Not So Dead Genes-Retrocopies as Regulators of Their Disease-Related Progenitors and Hosts.

Retroposition is RNA-based gene duplication leading to the creation of single exon nonfunctional copies. Nevertheless, over time, many of these duplicates acquire transcriptional capabilities. In human in most cases, these so-called retrogenes do not code for proteins but function as regulatory long noncoding RNAs (lncRNAs).

Milestones and current achievements in development of multifunctional bioscaffolds for medical application.

Tissue engineering (TE) is a rapidly growing interdisciplinary field, which aims to restore or improve lost tissue function. Despite that TE was introduced more than 20 years ago, trends and technologies point to new challenges and development. Current challenges involve the demand for multifunctional bioscaffolds which can stimulate tissue regrowth by biochemical curves, biomimetic patterns, active agents and proper cell types.

Anatomical and Clinical Implications in Neocondyle Stability After a Condylectomy.

Unlabelled: : A condylectomy of the mandibular condyle is considered to be the treatment of choice in most cases of condylar head hyperactivity. The aim of the procedure is to remove the growth center of the mandible which is responsible for the mandibular enlargement and asymmetry. This surgical procedure has an impact on the condyle shape and position, but the restoration of mandibular movement and a stable joint position (namely, the proper alignment of the newly shaped condylar head within the condyle fossa) should also be considered important surgical outcomes.

Allosteric Modulation of Cannabinoid Receptor 1-Current Challenges and Future Opportunities.

The cannabinoid receptor type 1 (CB1R), a G protein-coupled receptor (GPCR), plays an essential role in the control of many physiological processes such as hunger, memory loss, gastrointestinal activity, catalepsy, fear, depression, and chronic pain. Therefore, it is an attractive target for drug discovery to manage pain, neurodegenerative disorders, obesity, and substance abuse. However, the psychoactive adverse effects, generated by CB1R activation in the brain, limit the use of the orthosteric CB1R ligands as drugs.

Synthesis, Surface and Antimicrobial Activity of New Lactose-Based Surfactants.

This work presents a synthesis method for new surfactants based on lactose. The compounds obtained belong to the homologous series of O-β-D-Galactopyranosyl-(1→4)--alkyl-(3-sulfopropyl)-D-glucosamine hydrochloride, containing 12 and 14 carbon atoms in the alkyl chain, and they may serve as an example of cationic surfactants. The newly synthesized compounds exhibit good surface properties, low value of CMC (Critical Micelle Concentration) and good wetting properties.

Inverted and horizontal impacted third molars in an Early Modern skull from Wroclaw, Poland: a case report.

Background: An impacted tooth is one of the most commonly occurring dental anomalies, although some types of impaction (i.e. inverted angulation) may be considered rare finding.

Facile Synthesis of Sulfobetaine-Stabilized CuO Nanoparticles and Their Biomedical Potential.

A novel approach using a zwitterionic sulfobetaine-based surfactant for the synthesis of spherical copper oxide nanoparticles (CuO NPs) has been applied. For the first time, N-hexadecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate has been used as stabilizer to control the size and morphology of CuO NPs. Several techniques, such as transmission electron microscopy (TEM), X-ray diffraction (XRD), and fluorescence spectroscopy, are used to investigate the size, structure, and optical properties of synthesized CuO nanocrystals.

Synthesis, Surface and Antimicrobial Activity of Piperidine-Based Sulfobetaines.

A new method for the preparation of new heterocyclic amine surfactants based on sulfobetaines is proposed. Interfacial activities of the surfactants obtained in aqueous solution were studied by surface tension measurements. The critical micelle concentration, surface excess concentration, minimum area per surfactant molecule, and standard Gibbs energy of adsorption were determined.

Synthesis and Interfacial Activity of Novel Heterogemini Sulfobetaines in Aqueous Solution.

Three new heterogemini sulfobetaines and their chloride salts were synthesised. The interfacial activities of the obtained chlorides in aqueous solution were studied by equilibrium and dynamic surface tension measurements. The critical micelle concentration, surface excess concentration, minimum area per surfactant molecule and standard Gibbs energy of adsorption as well as micelle lifetime and diffusion coefficient were determined.

Effect of Sodium Chloride on the Surface and Wetting Properties of Aqueous Solutions of Cocamidopropyl Betaine.

Surfactants are important ingredients of personal care products and household products. The main characteristic of these compounds is to decrease the surface tension of solvent and resulting many properties such as contact angle, foam properties etc. The coexistence of other ingredients in the product may affect the properties of surfactants.