The Role of Cerium Valence in the Conversion Temperature of HTiO Nanoribbons to TiO-B and Anatase Nanoribbons, and Further to Rutile.

CeO-TiO is an important mixed oxide due to its catalytic properties, particularly in heterogeneous photocatalysis. This study presents a straightforward method to obtain 1D TiO nanostructures decorated with CeO nanoparticles at the surface. As the precursor, we used HTiO nanoribbons prepared from sodium titanate nanoribbons by ion exchange.

Enhancement of ZnO@RuO bifunctional photo-electro catalytic activity toward water splitting.

Catalytic materials are the greatest challenge for the commercial application of water electrolysis (WEs) and fuel cells (FCs) as clean energy technologies. There is a need to find an alternative to expensive and unavailable platinum group metal (PGM) catalysts. This study aimed to reduce the cost of PGM materials by replacing Ru with RuO and lowering the amount of RuO by adding abundant and multifunctional ZnO.

Removal of copper and iron from ethanolic solutions by an anion exchange resin and its implication to rare-earth magnet recycling.

In the recycling of end-of-life rare-earth magnets, the recovery of non-rare earth constituents is often neglected. In the present study, strong cation and anion exchange resins were tested batchwise for the recovery of the non-rare-earth constituents of permanent magnets (copper, cobalt, manganese, nickel and iron) from synthetic aqueous and ethanolic solutions. The cation exchange resin recovered most of metal ions from aqueous and ethanolic feeds, whereas the anion exchange resin could selectively recover copper and iron from ethanolic feeds.

Synthesis and Biological Properties of Alanine-Grafted Hydroxyapatite Nanoparticles.

Hydroxyapatite attracts great attention as hard tissues implant material for bones and teeth. Its application in reconstructive medicine depends on its biocompatibility, which is in a function of composition and surface properties. The insertion of a protein element in the composition of implants can improve the cell adhesion and the osseointegration.

Crystal Structure and Electrical Properties of Ruthenium-Substituted Calcium Copper Titanate.

This paper reports a detailed study of crystal structure and dielectric properties of ruthenium-substituted calcium-copper titanates (CaCuTiRuO, CCTRO). A series of three samples with different stoichiometry was prepared: CaCuTiRuO, = 0, 1 and 4, abbreviated as CCTO, CCT3RO and CCRO, respectively. A detailed structural analysis of CCTRO samples was done by the Rietveld refinement of XRPD data.

Origin and history of trace elements accumulation in recent Mediterranean sediments under heavy human impact. A case study of the Boka Kotorska Bay (Southeast Adriatic Sea).

The history of metal pollution in the semi-enclosed and human-influenced marine system of the Boka Kotorska Bay (Southern Adriatic) was studied considering geological composition of the surrounding catchment, the sedimentation rate and the mineralogical and early diagenetic processes in the recent sediments. The determination of background concentrations of metals, undertaken for the first time in this environment, proved to be particularly important for Ni and Cr, which are naturally enriched in the sediments of the southern Adriatic. The results showed widespread moderate contamination with Pb and Sn since the 1970s, while the upper layers of sediments near shipyards, marinas and urban areas were more contaminated with Sn, Cu, Pb, Zn, Cd, As, Sb and Mo.

Degradation of asbestos - Reinforced water supply cement pipes after a long-term operation.

Potable water supply system in major countries still uses a large proportion of asbestos-cement (AC) pipes for fresh drinking water delivery. Generally, after installation and initial purging, the AC tubes are believed to self-passivate by calcite scale and bio-film, especially when conveying hard water. However, the overall performance of AC tubes after decades of operation is significantly reduced and is still mainly unknown.

Synthesis and Characterization of Tungsten Suboxide WO Nanotiles.

WO nanotiles, with multiple stoichiometries within one nanotile, were synthesized via the chemical vapour transport method. They grow along the [010] crystallographic axis, with the thickness ranging from a few tens to a few hundreds of nm, with the lateral size up to several µm. Distinct surface corrugations, up to a few 10 nm deep appear during growth.

Solvent-Free Mechanochemical Synthesis and Characterization of Nickel Tellurides with Various Stoichiometries: NiTe, NiTe and NiTe.

The paper reports the synthesis of nickel tellurides via a mechanochemical method from elemental precursors. NiTe, NiTe, and NiTe were prepared by milling in stainless steel vials under nitrogen, using milling times from 1 h to 12 h. The products were characterized by powder X-ray diffraction (pXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), dynamic light scattering (DLS), vibrating sample magnetometer (VSM), UV-VIS spectrometry, and thermal analysis (TGA and DSC).

Bifunctional catalytic activity of ZnFeO toward the OER/ORR: seeking an optimal stoichiometry.

Eco-friendly and rapid microwave processing of a precipitate was used to produce Fe-doped zinc oxide (Zn1-xFexO, x = 0, 0.05, 0.1, 0.

Multi-stoichiometric quasi-two-dimensional WO tungsten oxides.

Quasi-two-dimensional tungsten oxide structures, which nucleate by epitaxial growth on W19O55 nanowires (NW) and grow as thin platelets, were identified. Both the nanowires and the platelets accommodate oxygen deficiency by the formation of crystallographic shear planes. Stoichiometric phases, W18O53 (WO2.

Size-related mineralogical and surface physicochemical properties of the mineral particles from the recent sediments of the Eastern Adriatic Sea.

The mineral composition and surface physico-chemical properties, i.e., specific surface area (SSA), cation exchange capacity (CEC), and surface charge of recent sediments and their submicron mineral fractions from different sedimentological environments of the Eastern Adriatic were investigated.

Rare-earth (Gd,Yb/Tm, Eu) co-doped hydroxyapatite as magnetic, up-conversion and down-conversion materials for multimodal imaging.

Taking advantage of the flexibility of the apatite structure, nano- and micro-particles of hydroxyapatite (HAp) were doped with different combinations of rare earth ions (RE = Gd, Eu, Yb, Tm) to achieve a synergy among their magnetic and optical properties and to enable their application in preventive medicine, particularly diagnostics based on multimodal imaging. All powders were synthesized through hydrothermal processing at T ≤ 200 °C. An X-ray powder diffraction analysis showed that all powders crystallized in P6/m space group of the hexagonal crystal structure.

Surfactant-assisted microwave processing of ZnO particles: a simple way for designing the surface-to-bulk defect ratio and improving photo(electro)catalytic properties.

ZnO nanopowders were produced using microwave processing of a precipitate and applied as a photoanode for photoelectrochemical water splitting. Two different surfactants, cetyltrimethylammonium bromide (CTAB) as the cationic and Pluronic F127 as the non-ionic one, were employed to adjust the surface-to-bulk defect ratio in the ZnO crystal structure and further to modify the photo(electro)catalytic activity of the ZnO photoanode. The crystal structure, morphological, textural, optical and photo(electro)catalytic properties of ZnO particles were studied in detail to explain the profound effects of the surfactants on the photoanode activity.

Insights into the kinetics of thermally induced crystallization of amorphous calcium phosphate.

Transformations between amorphous and crystalline apatite mechanistically govern some of the most essential processes in bone metabolism, including biomineralization and bone remodeling. Fundamental understanding of this phase transition can help us gain control over the formation and dissolution of boney tissues in vivo and utilize that knowledge for various therapeutic ends. Crystallization of hydroxyapatite (HAp) and two tricalcium phosphate (TCP) polymorphs from the metastable precursor, amorphous calcium phosphate (ACP) was here studied kinetically and mechanistically using thermal analyses, X-ray diffraction and Fourier-transform infrared spectroscopy.

Copper-polyaniline nanocomposite: Role of physicochemical properties on the antimicrobial activity and genotoxicity evaluation.

Copper nanoparticles (Cu NPs) have proven to own excellent antimicrobial efficacy, but the problems of easy oxidation and aggregation limit their practical application. Here, nanocomposite based on polyaniline (PANI) and Cu NPs solved this problem and brought additional physicochemical properties that are markedly advantageous for antimicrobial applications. Current work exploits this potential, to examine its time- and concentration-dependent antimicrobial activity, employing E.

Formation and morphogenesis of a cuttlebone's aragonite biomineral structures for the common cuttlefish (Sepia officinalis) on the nanoscale: Revisited.

This study describes and examines the structural and morphological properties of the hierarchically organized, aragonite cuttlebone forms for the common cuttlefish (Sepia officinalis, L.), including its main structural parts, the dorsal shield, and the chambers. Specifically, it complements the mechanism for the self-organized formation of aragonite, identifies the presence, and determines the role of soluble organic matrix (SOM) proteins in the morphogenesis of the cuttlebone's biomineral structures on the nanoscale.

Geochemistry of recent aragonite-rich sediments in Mediterranean karstic marine lakes: Trace elements as pollution and palaeoredox proxies and indicators of authigenic mineral formation.

This study investigates the geochemical characteristics of recent shallow-water aragonite-rich sediments from the karstic marine lakes located in the pristine environment on the island of Mljet (Adriatic Sea). Different trace elements were used as authigenic mineral formation, palaeoredox and pollution indicators. The distribution and the historical record of trace elements deposition mostly depended on the sedimentological processes associated with the formation of aragonite, early diagenetic processes governed by the prevailing physico-chemical conditions and on the recent anthropogenic activity.

Hydrothermally processed 1D hydroxyapatite: Mechanism of formation and biocompatibility studies.

Recent developments in bone tissue engineering have led to an increased interest in one-dimensional (1D) hydroxyapatite (HA) nano- and micro-structures such as wires, ribbons and tubes. They have been proposed for use as cell substrates, reinforcing phases in composites and carriers for biologically active substances. Here we demonstrate the synthesis of 1D HA structures using an optimized, urea-assisted, high-yield hydrothermal batch process.

Is Nano-Silver Safe within Bioactive Hydroxyapatite Composites?

Because of the abounded presence of the silver-containing products in the market and intensively studied silver-containing biomaterials in the literature, we investigated a hypothesis that stabilizing silver within bioactive hydroxyapatite composite is capable to provide safe and effective antibacterial action. For that purpose nanocomposite made of bioactive, mineral hydroxyapatite (HAp) and antibacterial silver (Ag) is studied for interactions with both, bacterial and human cells. The nanocomposite provides controlled release of Ag ions; induces severe damages in bacterial cells and is capable for strong bacteriostatic and bactericidal action.

Formation and properties of nanostructured colloidal manganese oxide particles obtained through the thermally controlled transformation of manganese carbonate precursor phase.

Structurally and morphologically different colloidal manganese oxide solids, including manganosite (MnO), bixbyite (Mn2O3) and hausmannite (Mn(2+)[Mn(3+)]2O4), were obtained through the initial biomimetically induced precipitation of a uniform, nanostructured and micron-sized rhodochrosite (MnCO3) precursor phase and their subsequent thermally controlled transformation into oxide structures in air and Ar/H2 atmospheres. The structures and morphology of the obtained precipitates were investigated using X-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM). Their surface properties were investigated by electrophoretic mobilities (EPM) and specific surface area (SSA) measurements.

Transformation of hydrogen titanate nanoribbons to TiO2 nanoribbons and the influence of the transformation strategies on the photocatalytic performance.

The influence of the reaction conditions during the transformation of hydrogen titanate nanoribbons to TiO2 nanoribbons on the phase composition, the morphology, the appearance of the nanoribbon surfaces and their optical properties was investigated. The transformations were performed (i) through a heat treatment in oxidative and reductive atmospheres in the temperature range of 400-650 °C, (ii) through a hydrothermal treatment in neutral and basic environments at 160 °C, and (iii) through a microwave-assisted hydrothermal treatment in a neutral environment at 200 °C. Scanning electron microscopy investigations showed that the hydrothermal processing significantly affected the nanoribbon surfaces, which became rougher, while the transformations based on calcination in either oxidative or reductive atmospheres had no effect on the morphology or on the surface appearance of the nanoribbons.

Nanomaterial with high antimicrobial efficacy--copper/polyaniline nanocomposite.

This study explores different mechanisms of antimicrobial action by designing hybrid nanomaterials that provide a new approach in the fight against resistant microbes. Here, we present a cheap copper-polyaniline (Cu-PANI) nanocomposite material with enhanced antimicrobial properties, prepared by simple in situ polymerization method, when polymer and metal nanoparticles are produced simultaneously. The copper nanoparticles (CuNPs) are uniformly dispersed in the polymer and have a narrow size distribution (dav = 6 nm).

Composite PLGA/AgNpPGA/AscH nanospheres with combined osteoinductive, antioxidative, and antimicrobial activities.

The global rise in the resistance of pathogens to conventional antibiotics has created an intensive search for alternative materials with antimicrobial properties. This study is performed with an intention to investigate the combined effects of poly(l-glutamic acid)-capped silver nanoparticles (AgNpPGA) and ascorbic acid (AscH) encapsulated within freeze-dried poly(lactide-co-glycolide) (PLGA) nanospheres to obtain a nanomaterial with simultaneous osteoinductive, antioxidative, and prolonged antimicrobial properties. The influence of PLGA/AgNpPGA/AscH particles on (i) viability and superoxide production of human umbilical vein endothelial cells in vitro, (ii) morphology and expression of osteogenic markers in osteoblastic MC3T3-E1 cells in vitro, and (iii) antimicrobial activity against a Gram-positive bacterium, methicillin-resistant Staphylococcus aureus, and a Gram-negative bacterium, Escherichia coli, was investigated.

Photocatalytic properties of TiO2 and TiO2/Pt: a sol-precipitation, sonochemical and hydrothermal approach.

In this work we prepared TiO2 nano-powders and TiO2/Pt nano-composites via three synthesis methods (sol-precipitation, sonochemical method, hydrothermal method) starting with the same precursors and media. To evaluate and compare the physical properties of the prepared materials, X-ray diffraction analysis, BET measurements, FTIR spectroscopy, X-ray photoelectron spectroscopy (XPS) and electron microscopy (TEM, HRTEM, SAED) were applied. The results showed changes to the TiO2 phase composition and crystallinity, the specific surface area as well as the platinum's particle shape and size, depending on the method of synthesis.