Hydride-Induced Reconstruction of Pd Electrode Surfaces: A Combined Computational and Experimental Study.

Designing electrocatalysts with optimal activity and selectivity relies on a thorough understanding of the surface structure under reaction conditions. In this study, experimental and computational approaches are combined to elucidate reconstruction processes on low-index Pd surfaces during H-insertion following proton electroreduction. While electrochemical scanning tunneling microscopy clearly reveals pronounced surface roughening and morphological changes on Pd(111), Pd(110), and Pd(100) surfaces during cyclic voltammetry, a complementary analysis using inductively coupled plasma mass spectrometry excludes Pd dissolution as the primary cause of the observed restructuring.

Hemilabile Binding of Acetylene in an Amide-Rich Ultramicroporous MOF Enables Strong Acetylene Selectivity.

Thanks to a hemilabile amide-based binding site, a previously unreported amide-functionalized metal-organic framework (MOF) exhibits high acetylene affinity over ethylene, methane, and carbon dioxide, three-in-one.

Effect of Polymorphism on the Sorption Properties of a Flexible Square-Lattice Topology Coordination Network.

The stimulus-responsive behavior of coordination networks (CNs), which switch between closed (nonporous) and open (porous) phases, is of interest because of its potential utility in gas storage and separation. Herein, we report two polymorphs of a new square-lattice () topology CN, , of formula [Cu(Imibz)] (HImibz = {[4-(1-imidazol-1-yl)phenylimino]methyl}benzoic acid), isolated from the as-synthesized CN , which subsequently transformed to a narrow pore solvate, , upon mild activation (drying in air or heating at 333 K under nitrogen). contains MeOH in cavities, which was removed through exposure to vacuum for 2 h, yielding the nonporous (closed) phase .

Crystal Engineering of a New Hexafluorogermanate Pillared Hybrid Ultramicroporous Material Delivers Enhanced Acetylene Selectivity.

Hybrid ultramicroporous materials (HUMs), metal-organic platforms that incorporate inorganic pillars, are a promising class of porous solids. A key area of interest for such materials is gas separation, where HUMs have already established benchmark performances. Thanks to their ready compositional modularity, we report the design and synthesis of a new HUM, , incorporating the ligand (4-(3,5-dimethyl-1-pyrazol-4-yl)pyridine, ) and GeF pillaring anions.

Anticancer Potential of Dendritic Poly(aryl ether)-Substituted Polypyridyl Ligand-Based Ruthenium(II) Coordination Entities.

This paper studies the anticancer potency of dendritic poly(aryl ether)-substituted polypyridyl ligand-based ruthenium(II) coordination entities. The dendritic coordination entities were successfully designed, synthesized, and characterized by different spectral methods such as Fourier transform infrared (FTIR), H and C- NMR, and mass spectrometry. Further, to understand the structure and solvation behavior of the coordination entities, we performed all-atom molecular dynamics (MD) simulations.

Shape-Memory Effect Enabled by Ligand Substitution and CO Affinity in a Flexible SIFSIX Coordination Network.

We report that linker ligand substitution involving just one atom induces a shape-memory effect in a flexible coordination network. Specifically, whereas SIFSIX-23-Cu, [Cu(SiF )(L) ] , (L=1,4-bis(1-imidazolyl)benzene, SiF =SIFSIX) has been previously reported to exhibit reversible switching between closed and open phases, the activated phase of SIFSIX-23-Cu , [Cu(SiF )(L ) ] (L =2,5-bis(1-imidazolyl)pyridine), transformed to a kinetically stable porous phase with strong affinity for CO . As-synthesized SIFSIX-23-Cu , α, transformed to less open, γ, and closed, β, phases during activation.

One Atom Can Make All the Difference: Gas-Induced Phase Transformations in Bisimidazole-Linked Diamondoid Coordination Networks.

Coordination networks (CNs) that undergo gas-induced transformation from closed (nonporous) to open (porous) structures are of potential utility in gas storage applications, but their development is hindered by limited control over their switching mechanisms and pressures. In this work, we report two CNs, [Co(bimpy)(bdc)] () and [Co(bimbz)(bdc)] () (Hbdc = 1,4-benzendicarboxylic acid; bimpy = 2,5-bis(1H-imidazole-1-yl)pyridine; bimbz = 1,4-bis(1H-imidazole-1-yl)benzene), that both undergo transformation from closed to isostructural open phases involving at least a 27% increase in cell volume. Although and only differ from one another by one atom in their -donor linkers (bimpy = pyridine, and bimbz = benzene), this results in different pore chemistry and switching mechanisms.

Controlling self-assembling co-polymer coatings of hydrophilic polysaccharide substrates via co-polymer block length ratio.

Hypothesis: The degree of polymerization of amphiphilic di-block co-polymers, which can be varied with ease in computer simulations, provides a means to control self-assembling di-block co-polymer coatings on hydrophilic substrates.

Simulations: We examine self-assembly of linear amphiphilic di-block co-polymers on hydrophilic surface via dissipative particle dynamics simulations. The system models a glucose based polysaccharide surface on which random co-polymers of styrene and n-butyl acrylate, as the hydrophobic block, and starch, as the hydrophilic block, forms a film.

Single core and multicore aggregates from a polymer mixture: A dissipative particle dynamics study.

Hypothesis: Multicore block copolymer aggregates correspond to self-assembly such that the polymer system spontaneously phase separates to multiple, droplet-like cores differing in the composition from the polymer surroundings. Such multiple core aggregates are highly useful capsules for different applications, e.g.

Modeling Polyzwitterion-Based Drug Delivery Platforms: A Perspective of the Current State-of-the-Art and Beyond.

Drug delivery platforms are anticipated to have biocompatible and bioinert surfaces. PEGylation of drug carriers is the most approved method since it improves water solubility and colloid stability and decreases the drug vehicles' interactions with blood components. Although this approach extends their biocompatibility, biorecognition mechanisms prevent them from biodistribution and thus efficient drug transfer.

Copolyelectrolyte-Based Nanocapsules for Oral Monoclonal Antibody Therapy: A Mesoscale Modeling Survey.

Antibody therapy generally requires parenteral injection to attain the required bioavailability and pharmacokinetics, but improved formulations may slow enzymatic degradation of the antibody in the gastrointestinal tract, permitting the use of noninvasive oral delivery. Rationally designed carrier materials can potentially improve therapeutic activity both by shielding fragile biopharmaceuticals from proteolytic degradation and targeting specific receptors in vivo. One potentially useful class of protein carriers is block copolyelectrolytes, one polyelectrolyte plus one neutral hydrophilic polymer block, that self-assemble into stable micelles, providing a simple and biocompatible nanocapsule separating the protein from the outer medium.

Multicore Assemblies from Three-Component Linear Homo-Copolymer Systems: A Coarse-Grained Modeling Study.

Multicore polymer micelles and aggregates are assemblies that contain several cores. The dual-length-scale compartmentalized solvophobic-solvophilic molecular environment makes them useful for, e.g.

Molecular Modelling Guided Modulation of Molecular Shape and Charge for Design of Smart Self-Assembled Polymeric Drug Transporters.

Nanomedicine employs molecular materials for prevention and treatment of disease. Recently, smart nanoparticle (NP)-based drug delivery systems were developed for the advanced transport of drug molecules. Rationally engineered organic and inorganic NP platforms hold the promise of improving drug targeting, solubility, prolonged circulation, and tissue penetration.

Effect of particle surface corrugation on colloidal interactions.

Hypothesis: Production of corrugated particles generally introduces several morphological heterogeneities, such as surface roughness and local variations in the corrugation pattern, which are known from model system studies to significantly alter the colloidal interaction energy. Thus, realistic particle morphologies need to be investigated and compared to simple model shapes to yield insights into how interactions are influenced by such morphological heterogeneities.

Experiments: We applied the surface element integration method to study the colloidal interactions of electron tomography-based, realistic, corrugated colloidal particles and their symmetric, concave polyhedral analogs by differentiating local surface features to vertices, ridges and ridge networks.

Molecular dynamics simulation of polystyrene copolymer with octyl short-chain branches in toluene.

In this study, dimensional, conformational and dynamic behaviors of a short-chain branched styrene/1-octene copolymer chain with different 1-octene percentages, i.e., 0, 2, 4 and 6%, in toluene are investigated at the temperature of 298.

Dual responsive PMEEECL-PAE block copolymers: a computational self-assembly and doxorubicin uptake study.

The self-assembly behaviour of dual-responsive block copolymers and their ability to solubilize the anticancer drug doxorubicin (DOX) has been investigated using all-atom molecular dynamics (MD) simulations, MARTINI coarse-grained (CG) force field simulation and Scheutjens-Fleer self-consistent field (SCF) computations. These diblock copolymers, composed of poly{γ-2-[2-(2-methoxyethoxy)ethoxy]ethoxy-ε-caprolactone} (PMEEECL) and poly(β-amino ester) (PAE) are dual-responsive: the PMEEECL block is thermoresponsive (becomes insoluble above a certain temperature), while the PAE block is pH-responsive (becomes soluble below a certain pH). Three MEEECL-AE compositions with = 5, 10, and 15, have been studied.

A deep insight into the polystyrene chain in cyclohexane at theta temperature: molecular dynamics simulation and quantum chemical calculations.

Molecular characteristics of an atactic polystyrene (aPS) chain with different lengths in a theta solvent, cyclohexane at 307.65 K, were studied via molecular dynamics (MD) simulation. The interaction energy of the aPS dilute solution models and Flory-Huggins (FH) interaction parameter were calculated to investigate the effect of the chain molecular weight on its compatibility with the solvent molecules.

The compatibility of Tacrine molecule with poly(n-butylcyanoacrylate) and Chitosan as efficient carriers for drug delivery: A molecular dynamics study.

According to the critical role of drug delivery in the treatment of diseases of the central nervous system (CNS), the selection of a suitable carrier plays an important role in the greater effectiveness of drugs. Due to good biocompatibility, biodegradability and low toxicity of polymeric nanoparticles, especially poly(n-butylcyanoacrylate) (PBCA) and Chitosan, these nanoparticles are considered as efficient carriers in drug delivery to the brain. In order to investigate the compatibility of these two polymers with different degrees of polymerization versus a Tacrine unit as the most well known drug for the treatment of Alzheimer's disease, molecular dynamics simulation (MD) is used as a principal tool for studying molecular systems.

A molecular simulation study on the adhesion behavior of a functionalized polyethylene-functionalized graphene interface.

Molecular dynamics simulations were applied to investigate interfacial adhesion between functionalized polyethylene (fPE) and functionalized graphene (fG) surfaces. In order to functionalize the PE and graphene surfaces, various types of functional groups were covalently bonded on the surfaces in a random manner. Adhesion between fPE and fG surfaces was evaluated by the calculation of work of separation (Wsep), while the interfaces were not allowed to relax.